Wraps by car

McLaren 570GT wrap

This page covers the McLaren 570GT wrap, a vinyl wrap project for one generation of a coupe sports car. The car has been in production since 2016 and is still built today. Its body is 178.3 inches (4,530 mm) long with two doors. A full vinyl wrap of the newest body takes about 52 feet (16 m) of 60-inch (1.52 m) cast film or about 59 feet (18 m) of chrome or patterned film.

1generations16 mof film for a full wrap

McLaren 570GT, first generation, factory photo
McLaren 570GT, first generation. Factory color shown.

McLaren 570GT wrap colors and ideas

  • McLaren 570GT black wrap
  • McLaren 570GT white wrap
  • McLaren 570GT gray wrap
  • McLaren 570GT silver wrap
  • McLaren 570GT red wrap
  • McLaren 570GT blue wrap
  • McLaren 570GT green wrap
  • McLaren 570GT yellow wrap
  • McLaren 570GT orange wrap
  • McLaren 570GT purple wrap
  • McLaren 570GT pink wrap
  • McLaren 570GT teal wrap
  • McLaren 570GT brown wrap
  • McLaren 570GT gold wrap
  • McLaren 570GT chrome wrap
  • McLaren 570GT color shift wrap
  • McLaren 570GT carbon fiber wrap
  • McLaren 570GT camo and patterned wrap

How much vinyl to wrap a McLaren 570GT

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–nowcoupe (2 doors)178.3 in (4,530 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

McLaren 570GT wrap cost factors

The McLaren 570GT wrap cost is set by the size of the car, the film you pick, and how many panels come off. The body is 178.3 inches (4,530 mm) long, which calls for about 52 feet (16 m) of standard cast film. Chrome or patterned film raises the amount to about 59 feet (18 m) and adds labor for pattern alignment. The two long doors are large panels that take extra time to wrap without seams.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

McLaren 570GT wraps by generation

Swipe sideways. Tap a card for the full description.

McLaren 570GT, first generation, factory photo
Factory color shown

2016–now McLaren 570GT coupe (first generation)

2016–nowcoupe (2 doors)178.3 in (4,530 mm)

The first generation McLaren 570GT is a two-door coupe that measures 178.3 inches (4,530 mm) in length. A full wrap of this body needs about 52 feet (16 m) of 60-inch (1.52 m) cast film or about 59 feet (18 m) of chrome or patterned film. The car has only two long side doors, and each door is one large piece of film. There are no other body styles or generations in this catalog to compare it with.

Two long side doors: each door is one large piece of film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a McLaren 570GT

On a McLaren 570GT, a partial wrap can cover the roof, hood, and mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film that can be applied to the front end. These jobs use less film than a full wrap and focus on the areas that see the most wear.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a McLaren 570GT: body, cut-outs and film

A McLaren 570GT vinyl wrap is shaped by the car's compact coupe body and its two long side doors. The car is 178.3 inches (4,530 mm) long, which keeps the total film need near 52 feet (16 m). Each door is a large single panel that takes a full sheet of film without a seam. The coupe style avoids extra film for a rear hatch or convertible roof.

McLaren 570GT wrap ideas must account for the long doors, which are the largest single pieces on the body. Each side door takes one large sheet of film and needs a steady hand to avoid wrinkles. The roof and hood are also flat enough for a single installer to manage. Door handles and mirror caps are removed before the film goes on to keep the edges clean.

How much vinyl to wrap a McLaren 570GT depends on the film type you choose. The car has only one generation and one body style, a two-door coupe, so there is no variation between years. A standard color change wrap uses about 52 feet (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 59 feet (18 m) because the pattern must be matched across panels.

Questions about wrapping a McLaren 570GT

How much vinyl does it take to wrap a McLaren 570GT?

A McLaren 570GT takes about 52 feet (16 m) of 60-inch (1.52 m) cast film for a full wrap. If you use chrome or patterned film, you need about 59 feet (18 m). The car is 178.3 inches (4,530 mm) long and has only two long doors.

Can I wrap only the hood or the roof of a McLaren 570GT?

Yes, you can wrap only the hood or the roof of a McLaren 570GT. A partial wrap on this car often covers the roof, hood, and mirror caps. You can also do a chrome delete on the window trim and badges or put paint protection film on the front end.

Is a McLaren 570GT hard to wrap?

A McLaren 570GT is not especially hard to wrap, but its two long side doors add work. Each door is one large piece of film, so you must handle a big sheet without creasing it. The car's 178.3-inch (4,530 mm) length means a full wrap takes about 52 feet (16 m) of film.

How many generations of the McLaren 570GT does this page cover?

This page covers one generation of the McLaren 570GT. The car has been in production since 2016 and is still built today as the same first generation coupe.