Wraps by car

McLaren 600LT wrap

This page covers the McLaren 600LT wrap and what a full vinyl wrap involves on its two-door bodies. The 600LT has one generation in the catalog, produced from 2019 onward. A complete wrap takes about 46 ft (14 m) of 60-inch (1.52 m) cast film for the convertible and about 52 ft (16 m) for the coupe. Patterned or chrome film can bring the total up to about 59 ft (18 m).

1generations16 mof film for a full wrap

McLaren 600LT, first generation, factory photo
McLaren 600LT, first generation. Factory color shown.

McLaren 600LT wrap colors and ideas

  • McLaren 600LT black wrap
  • McLaren 600LT white wrap
  • McLaren 600LT gray wrap
  • McLaren 600LT silver wrap
  • McLaren 600LT red wrap
  • McLaren 600LT blue wrap
  • McLaren 600LT green wrap
  • McLaren 600LT yellow wrap
  • McLaren 600LT orange wrap
  • McLaren 600LT purple wrap
  • McLaren 600LT pink wrap
  • McLaren 600LT teal wrap
  • McLaren 600LT brown wrap
  • McLaren 600LT gold wrap
  • McLaren 600LT chrome wrap
  • McLaren 600LT color shift wrap
  • McLaren 600LT carbon fiber wrap
  • McLaren 600LT camo and patterned wrap

How much vinyl to wrap a McLaren 600LT

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowconvertible, coupe (2 doors)181.3 in (4,604 mm)about 46 ft (14 m) for the convertible to 52 ft (16 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m)

McLaren 600LT wrap cost factors

The McLaren 600LT wrap cost depends on the body style, the film type, and how much of the car is covered. The coupe needs about 52 ft (16 m) of 60-inch (1.52 m) film, while the convertible needs about 46 ft (14 m). Patterned or chrome film raises the amount to as much as 59 ft (18 m). The two long doors add labor because each is a single large piece that must be aligned exactly.

  • Film for a full wrap: about 46 ft (14 m) for the convertible to 52 ft (16 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

McLaren 600LT wraps by generation

Swipe sideways. Tap a card for the full description.

McLaren 600LT, first generation, factory photo
Factory color shown

2019–now McLaren 600LT convertible, coupe (first generation)

2019–nowconvertible, coupe (2 doors)181.3 in (4,604 mm)

On the first generation McLaren 600LT, the open top is not wrapped when it is a fabric roof. The vinyl ends where the fabric begins, with the edge tucked under the header rail and at the rear tonneau. A folding hard top would be wrapped as its own panels, but the 600LT uses a fabric roof. The installer trims the film along that line so no vinyl touches the moving top.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) for the convertible to 52 ft (16 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a McLaren 600LT

A McLaren 600LT chrome delete covers the window trim and badges with black film instead of bright metal. A partial wrap on this car can include the roof, hood, and mirror caps for a two-tone look. Paint protection film (PPF) as a clear film on the front end is another option for the 600LT. These smaller jobs use less material than a full wrap and leave the large door panels untouched.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a McLaren 600LT: body, cut-outs and film

The McLaren 600LT vinyl wrap must follow a compact sports car body with a 181.3 in (4,604 mm) length. The two door styles are a convertible and a coupe, both with two long doors. Each door is one large piece of film, so the flat side panels use material efficiently. The short overhangs and curved rear deck need careful relief cuts but no extra-wide film.

McLaren 600LT wrap ideas should account for the areas that need cut-outs or removal. The fabric roof on the convertible is not wrapped and the film ends where it begins, so edges must be trimmed cleanly at the header and tonneau. Each long side door is one large piece of film, which lets a single panel run from the front fender to the rear intake. Badges and the front splitter come off for a clean install and go back on after the film is laid.

If you need to know how much vinyl to wrap a McLaren 600LT, the answer changes only by body style because there is one generation. The coupe takes about 52 ft (16 m) of 60-inch (1.52 m) cast film, while the convertible takes about 46 ft (14 m). Adding chrome or patterned film can push the total up to about 59 ft (18 m). The difference comes from the roof panel on the coupe, which the convertible replaces with a fabric top that is not wrapped.

Questions about wrapping a McLaren 600LT

How much vinyl does it take to wrap a McLaren 600LT?

A McLaren 600LT takes about 46 ft (14 m) of vinyl for the convertible and about 52 ft (16 m) for the coupe, using 60-inch (1.52 m) cast film. The figure rises to up to about 59 ft (18 m) if you choose chrome or patterned film. The coupe needs more because it has a roof panel that the convertible does not wrap.

Is the top of a McLaren 600LT wrapped?

No, the fabric top of a McLaren 600LT convertible is not wrapped. The vinyl ends where the fabric begins, with the edge trimmed at the header and tonneau. A folding hard top would be wrapped as its own panels, but the 600LT uses a fabric roof.

Which McLaren 600LT body takes more film?

The coupe body of the McLaren 600LT takes more film than the convertible. The coupe needs about 52 ft (16 m) of 60-inch (1.52 m) cast film, while the convertible needs about 46 ft (14 m). The extra material covers the fixed roof panel that the convertible replaces with an unwrapped fabric top.

Can I wrap only the hood or the roof of a McLaren 600LT?

Yes, you can wrap only the hood or the roof of a McLaren 600LT. A partial wrap can also include the mirror caps. These jobs leave the two long doors out and use less film than a full cover.