Wraps by car

McLaren Senna wrap

The McLaren Senna wrap page covers the first and only generation of this track-focused sports car, produced from 2018 to now. A full vinyl wrap of the coupe body uses about 52 ft (16 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, plan for about 59 ft (18 m) because of pattern matching and extra waste.

1generations16 mof film for a full wrap

McLaren Senna, first generation, factory photo
McLaren Senna, first generation. Factory color shown.

McLaren Senna wrap colors and ideas

  • Senna black wrap
  • Senna white wrap
  • Senna gray wrap
  • Senna silver wrap
  • Senna red wrap
  • Senna blue wrap
  • Senna green wrap
  • Senna yellow wrap
  • Senna orange wrap
  • Senna purple wrap
  • Senna pink wrap
  • Senna teal wrap
  • Senna brown wrap
  • Senna gold wrap
  • Senna chrome wrap
  • Senna color shift wrap
  • Senna carbon fiber wrap
  • Senna camo and patterned wrap

How much vinyl to wrap a McLaren Senna

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2018–nowcoupe (2 doors)186.8 in (4,744 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Senna wrap cost factors

Senna wrap cost depends on the size of the car, the number of panels, and the film you choose. The body is 186.8 in (4,744 mm) long and uses about 52 ft (16 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film adds about 7 ft (2 m) to the estimate, which means more material and more installation time.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Senna wraps by generation

Swipe sideways. Tap a card for the full description.

McLaren Senna, first generation, factory photo
Factory color shown

2018–now Senna coupe (first generation)

2018–nowcoupe (2 doors)186.8 in (4,744 mm)

The first generation McLaren Senna is a two-door coupe that measures 186.8 in (4,744 mm) long and has many large panels. A full wrap uses about 52 ft (16 m) of 60-inch (1.52 m) cast film, or about 59 ft (18 m) of chrome or patterned film. The two long side doors are each one large piece of film, so the installer needs extra care on those panels.

Two long side doors: each door is one large piece of film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Senna

A partial wrap on a McLaren Senna often covers the roof, hood, or mirror caps. Chrome delete is another option: the window trim and badges are covered with black film to change the bright trim. Paint protection film (PPF) on the front end protects the nose, hood, and mirrors with clear film.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a McLaren Senna: body, cut-outs and film

A McLaren Senna vinyl wrap is a large job on a long, low coupe with two doors. The body is 186.8 in (4,744 mm) long, so every panel is longer than on a small car. The two long side doors mean each door is one large piece of film, and the roof is a single big section.

Senna wrap ideas start with the two long side doors, because each door is one large piece of film that needs careful stretching. The door handles, mirrors, and badges should come off for a clean install, and the film is cut around the lights and vents. The front splitter and rear wing are wrapped separately from the main body.

How much vinyl to wrap a Senna stays the same across the catalog, because the car has only one generation. The first generation runs from 2018 to now, and its coupe body has not changed size or shape. Anyone counting film for this car uses the same estimate: about 52 ft (16 m) of standard cast film.

Questions about wrapping a McLaren Senna

How much vinyl does it take to wrap a McLaren Senna?

A full McLaren Senna wrap takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, the estimate is about 59 ft (18 m) because of pattern matching and waste.

Can I wrap only the hood or the roof of a Senna?

Yes, you can wrap only the hood or the roof of a Senna. A partial wrap on this car often covers the roof, hood, or mirror caps, and chrome delete covers the window trim and badges.

Is a Senna hard to wrap?

A Senna is harder to wrap than an average car because of its length of 186.8 in (4,744 mm) and its two long side doors. Each door is one large piece of film, and the many vents, lights, and the large rear wing add cut-outs and separate pieces.

How many generations of the Senna does this page cover?

This page covers one generation of the McLaren Senna, the first generation from 2018 to now. The car has not changed body style in that time, so all models share the same wrap estimates.