Wraps by car

McLaren Elva wrap

A McLaren Elva wrap covers the open two-seat body with a full vinyl wrap. This catalog lists the one generation built from 2020 to now. A complete wrap of the newest body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film.

1generations14.5 mof film for a full wrap

McLaren Elva, first generation, factory photo
McLaren Elva, first generation. Factory color shown.

McLaren Elva wrap colors and ideas

  • Elva black wrap
  • Elva white wrap
  • Elva gray wrap
  • Elva silver wrap
  • Elva red wrap
  • Elva blue wrap
  • Elva green wrap
  • Elva yellow wrap
  • Elva orange wrap
  • Elva purple wrap
  • Elva pink wrap
  • Elva teal wrap
  • Elva brown wrap
  • Elva gold wrap
  • Elva chrome wrap
  • Elva color shift wrap
  • Elva carbon fiber wrap
  • Elva camo and patterned wrap

How much vinyl to wrap a McLaren Elva

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowconvertible (2 doors)186.8 in (4,744 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Elva wrap cost factors

The Elva wrap cost depends on the amount of cast film, which is about 48 ft (14.5 m) for a full coverage in a solid color. Chrome or patterned film raises the amount to about 61 ft (18.5 m) because of extra waste in matching patterns. The open body has fewer parts to remove, but the many intakes and the low nose add labor. A partial wrap or paint protection film uses less material and changes the cost accordingly.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Elva wraps by generation

Swipe sideways. Tap a card for the full description.

McLaren Elva, first generation, factory photo
Factory color shown

2020–now Elva convertible (first generation)

2020–nowconvertible (2 doors)186.8 in (4,744 mm)

The first generation McLaren Elva is a convertible with no roof and a wrap ends at the top edge of the body. A fabric top is not wrapped and the film stops where the top begins. A folding hard top on a convertible would be wrapped as separate panels, but the Elva has no such part.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on an Elva

Smaller jobs on an Elva include a partial wrap of the hood, mirror caps, or rear deck. An Elva chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is another option: a clear film on the front end to guard against stone chips.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a McLaren Elva: body, cut-outs and film

The Elva is a compact convertible with a length of 186.8 in (4,744 mm). Its open body has no roof panel, so a McLaren Elva vinyl wrap covers mainly the large front and rear surfaces. The short body and two doors keep the total film area moderate for a supercar.

Elva wrap ideas include covering the hood, doors, and rear deck with color change film. The front splitter and side intakes need careful cut-outs for airflow. Badges and the small windshield surround must be removed or masked before the film is laid.

There is only one generation of the Elva, so the film estimate stays the same across all production years from 2020 to now. An installer planning how much vinyl to wrap an Elva can use the factory dimensions of the first generation. The open body does not change shape, so film patterns remain consistent.

Questions about wrapping a McLaren Elva

How much vinyl does it take to wrap a McLaren Elva?

A full McLaren Elva wrap takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. That estimate covers the complete open body of the one generation. Chrome or patterned film increases the amount to about 61 ft (18.5 m).

Is the top of an Elva wrapped?

No, the top of an Elva is not wrapped because the car has no roof. The film ends where the open cockpit begins. A fabric top is never wrapped and a folding hard top would be done as its own panels, but the Elva has neither.

Can I wrap only the hood or the roof of an Elva?

Yes, you can wrap only the hood or the rear deck of an Elva as a partial wrap. A partial job often includes the hood, mirror caps, or rear deck. Chrome delete on the window trim and badges is another smaller option.

Is an Elva hard to wrap?

An Elva is not the hardest car to wrap, but its open body and compact size add work. The convertible shape means film must end cleanly at the top edge of the body. The front splitter and side intakes require precise cutting, and the large single-piece hood needs a careful stretch of the vinyl.