Wraps by car

McLaren 765LT wrap

The McLaren 765LT wrap page covers the 2020–now car in one generation. A vinyl wrap on the newest body takes about 48 ft (14.5 m) for the convertible and up to 62 ft (19 m) for the coupe.

1generations19 mof film for a full wrap

McLaren 765LT, first generation, factory photo
McLaren 765LT, first generation. Factory color shown.

McLaren 765LT wrap colors and ideas

  • McLaren 765LT black wrap
  • McLaren 765LT white wrap
  • McLaren 765LT gray wrap
  • McLaren 765LT silver wrap
  • McLaren 765LT red wrap
  • McLaren 765LT blue wrap
  • McLaren 765LT green wrap
  • McLaren 765LT yellow wrap
  • McLaren 765LT orange wrap
  • McLaren 765LT purple wrap
  • McLaren 765LT pink wrap
  • McLaren 765LT teal wrap
  • McLaren 765LT brown wrap
  • McLaren 765LT gold wrap
  • McLaren 765LT chrome wrap
  • McLaren 765LT color shift wrap
  • McLaren 765LT carbon fiber wrap
  • McLaren 765LT camo and patterned wrap

How much vinyl to wrap a McLaren 765LT

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowconvertible, coupe (2 doors)181.1 in (4,600 mm)about 48 ft (14.5 m) for the convertible to 62 ft (19 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m)

McLaren 765LT wrap cost factors

The McLaren 765LT wrap cost depends on film choice, body style, and the installer's work. The coupe needs up to 62 ft (19 m) of film, while the convertible needs about 48 ft (14.5 m). Cast film costs less to buy than chrome or patterned film, which can take up to 76 ft (23 m). Labor also shifts with the body, because the coupe has more roof area and the convertible has fabric top edges to finish.

  • Film for a full wrap: about 48 ft (14.5 m) for the convertible to 62 ft (19 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.
  • A tall body (85.1 in (2,161 mm)): the roof is wrapped from a platform.

McLaren 765LT wraps by generation

Swipe sideways. Tap a card for the full description.

McLaren 765LT, first generation, factory photo
Factory color shown

2020–now McLaren 765LT convertible, coupe (first generation)

2020–nowconvertible, coupe (2 doors)181.1 in (4,600 mm)

On the first-generation McLaren 765LT, an open top changes where the wrap ends. For a convertible with a fabric top, the vinyl covers the body panels and stops cleanly where the top meets the metal. A folding hard top is wrapped as its own set of panels, like any other body panel. The film never goes over the top material itself.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

A tall body (85.1 in (2,161 mm)): the roof is wrapped from a platform.

Film: about 48 ft (14.5 m) for the convertible to 62 ft (19 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a McLaren 765LT

You can wrap only part of a McLaren 765LT, and the options are roof, hood, or mirror caps. A partial wrap on the hood or roof uses less film than a full wrap and still changes the look. For a chrome delete, the window trim and badges are covered with black film. Paint protection film (PPF) is another partial job, with clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a McLaren 765LT: body, cut-outs and film

The McLaren 765LT vinyl wrap follows a compact body with a coupe and a convertible. The car is 181.1 in (4,600 mm) long, so film for the sides runs in long but manageable pieces. Two long side doors mean each door is wrapped as one large piece for a clean look. The tall body, 85.1 in (2,161 mm), puts the roof work on a platform.

McLaren 765LT wrap ideas start with careful planning around doors, glass, and lights. Each long side door is one large piece of film, so you need clean, even edges. The glass, handles, lights, and badges are cut out, and some trim can be wrapped separately. A fabric top on the convertible is not wrapped, and the film ends where the top begins.

When you figure how much vinyl to wrap a McLaren 765LT, the body style sets the number. For the first generation, the convertible takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film, while the coupe needs up to 62 ft (19 m). Chrome or patterned film raises the total to about 76 ft (23 m) for either body.

Questions about wrapping a McLaren 765LT

How much vinyl does it take to wrap a McLaren 765LT?

A full wrap of a McLaren 765LT takes about 48 ft (14.5 m) for the convertible and up to 62 ft (19 m) for the coupe, using 60-inch (1.52 m) cast film. Chrome or patterned film can require up to about 76 ft (23 m).

Is the top of a McLaren 765LT wrapped?

On a McLaren 765LT with a fabric top, the top is not wrapped, and the film ends where the top begins. If the car has a folding hard top, that top is wrapped as its own panels.

Which McLaren 765LT body takes more film?

The coupe body of a McLaren 765LT takes more film than the convertible. The coupe needs up to 62 ft (19 m), while the convertible needs about 48 ft (14.5 m).

Can I wrap only the hood or the roof of a McLaren 765LT?

Yes, you can wrap only the hood or the roof of a McLaren 765LT. A partial wrap can also cover mirror caps, or you can get a chrome delete on window trim and badges. Paint protection film (PPF) on the front end is another smaller job.