Wraps by car

McLaren GT wrap

The McLaren GT wrap guide covers the first generation of the McLaren GT, produced from 2019 to now. A full vinyl wrap of the newest coupe body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the estimate rises to about 59 ft (18 m).

1generations16 mof film for a full wrap

McLaren GT, first generation, factory photo
McLaren GT, first generation. Factory color shown.

McLaren GT wrap colors and ideas

  • McLaren GT black wrap
  • McLaren GT white wrap
  • McLaren GT gray wrap
  • McLaren GT silver wrap
  • McLaren GT red wrap
  • McLaren GT blue wrap
  • McLaren GT green wrap
  • McLaren GT yellow wrap
  • McLaren GT orange wrap
  • McLaren GT purple wrap
  • McLaren GT pink wrap
  • McLaren GT teal wrap
  • McLaren GT brown wrap
  • McLaren GT gold wrap
  • McLaren GT chrome wrap
  • McLaren GT color shift wrap
  • McLaren GT carbon fiber wrap
  • McLaren GT camo and patterned wrap

How much vinyl to wrap a McLaren GT

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowcoupe (2 doors)184.4 in (4,683 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

McLaren GT wrap cost factors

The McLaren GT wrap cost depends on the film type and the size of the covered area. A full wrap uses about 52 ft (16 m) of cast film, while chrome or patterned film needs about 59 ft (18 m). The coupe's 184.4-inch (4,683 mm) length also means more time on the large doors and roof.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

McLaren GT wraps by generation

Swipe sideways. Tap a card for the full description.

McLaren GT, first generation, factory photo
Factory color shown

2019–now McLaren GT coupe (first generation)

2019–nowcoupe (2 doors)184.4 in (4,683 mm)

The first generation McLaren GT is a two-door coupe that measures 184.4 in (4,683 mm) long. This size means a full wrap uses around 52 ft (16 m) of 60-inch (1.52 m) film. The body has large panels, so the number of pieces is lower than on a car with many small parts.

Two long side doors: each door is one large piece of film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a McLaren GT

A partial wrap on a McLaren GT can cover the roof, hood, or mirror caps. Chrome delete for the McLaren GT includes covering the window trim and badges with black film. Paint protection film (PPF) is another option: a clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a McLaren GT: body, cut-outs and film

The McLaren GT vinyl wrap has to cover a 184.4-inch (4,683 mm) coupe body. The two-door shape means large, flat panels that are straightforward to wrap, but the overall size increases the amount of film needed. The long hood and roof are single pieces in many installs, so careful trimming of the material is essential.

For McLaren GT wrap ideas, keep the two long side doors in mind: each door is one large piece of film. That means door handle cut-outs are minimal, but the installer must handle a big sheet without creasing it. You may also want to cover the front bumper, rear diffuser, and side skirts, which often require inlays around sharp edges.

If you are counting how much vinyl to wrap a McLaren GT, the first-generation body is the only one to consider. There are no earlier generations with different dimensions. As a result, the film estimate stays the same for all 2019 and newer McLaren GT coupes.

Questions about wrapping a McLaren GT

How much vinyl does it take to wrap a McLaren GT?

A McLaren GT wrap takes about 52 ft (16 m) of 60-inch (1.52 m) cast film for a full color change. If you choose chrome or patterned film, the figure is about 59 ft (18 m). These estimates apply to the first-generation coupe body.

Can I wrap only the hood or the roof of a McLaren GT?

Yes, you can wrap only the hood or the roof of a McLaren GT. A partial wrap can also include the mirror caps, or you can do a chrome delete on the window trim and badges. The roof and hood are often done together to change the car's look without a full wrap.

Is a McLaren GT hard to wrap?

A McLaren GT is not particularly hard to wrap, but its size adds work. The body is 184.4 in (4,683 mm) long, and each of the two side doors is one large piece of film. Handling those big sheets without creasing them requires care and often a second pair of hands.

How many generations of the McLaren GT does this page cover?

This page covers one generation of the McLaren GT, produced from 2019 to now. There are no earlier generations in this catalog. The film estimates and body details refer to that first-generation coupe.