Wraps by car

McLaren Artura wrap

The McLaren Artura is a compact car sold as a convertible or a coupe, and this page covers one generation in the catalog. A vinyl wrap for this car needs a different amount of film by body style. The newest body takes from about 43 ft (13 m) for the convertible to 57 ft (17.5 m) for the coupe with 60-inch (1.52 m) cast film.

1generations13 mof film for a full wrap

McLaren Artura, first generation, factory photo
McLaren Artura, first generation. Factory color shown.

McLaren Artura wrap colors and ideas

  • Artura black wrap
  • Artura white wrap
  • Artura gray wrap
  • Artura silver wrap
  • Artura red wrap
  • Artura blue wrap
  • Artura green wrap
  • Artura yellow wrap
  • Artura orange wrap
  • Artura purple wrap
  • Artura pink wrap
  • Artura teal wrap
  • Artura brown wrap
  • Artura gold wrap
  • Artura chrome wrap
  • Artura color shift wrap
  • Artura carbon fiber wrap
  • Artura camo and patterned wrap

How much vinyl to wrap a McLaren Artura

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowconvertible, coupe (2 doors)178.7 in (4,539 mm)about 43 ft (13 m) for the convertible to 57 ft (17.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m)

Artura wrap cost factors

Artura wrap cost depends on the body style and the film you pick. The coupe takes more film than the convertible, so it costs more to wrap. Chrome or patterned film uses up to about 70 ft (21.5 m), while a plain color change uses from about 43 ft (13 m) to 57 ft (17.5 m).

  • Film for a full wrap: about 43 ft (13 m) for the convertible to 57 ft (17.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.
  • A tall body (77.8 in (1,976 mm)): the roof is wrapped from a platform.

Artura wraps by generation

Swipe sideways. Tap a card for the full description.

McLaren Artura, first generation, factory photo
Factory color shown

2021–now Artura convertible, coupe (first generation)

2021–nowconvertible, coupe (2 doors)178.7 in (4,539 mm)

On the open top of the first generation McLaren Artura the fabric roof is not wrapped and the vinyl ends where the top begins. A folding hard top is wrapped as its own panels, so the film follows the roof lines. The roof area is tall on this body, at 77.8 in (1,976 mm), so a platform is used to wrap it.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

A tall body (77.8 in (1,976 mm)): the roof is wrapped from a platform.

Film: about 43 ft (13 m) for the convertible to 57 ft (17.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on an Artura

A partial wrap on an Artura is a smaller job that covers the roof, the hood or the mirror caps. Artura chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end of the car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a McLaren Artura: body, cut-outs and film

A McLaren Artura vinyl wrap has to work with a small two-door body that is 178.7 in (4,539 mm) long. The coupe and convertible share the same size, so the wrap uses most film on the long hood and the rear deck. Each side door is wrapped as one large piece of film.

Artura wrap ideas start with removing or working around parts that cannot stay under film. The fabric top of the convertible is not wrapped, and the film ends where the top begins. A folding hard top is wrapped as panels of its own. The charge port door comes off and is wrapped as a small separate piece.

How much vinyl to wrap an Artura changes only a little between trims because the catalog has one generation, from 2021 to now. The coupe body takes more film than the convertible because it has a full roof. A car with chrome or patterned film can take up to about 70 ft (21.5 m) of 60-inch (1.52 m) film.

Questions about wrapping a McLaren Artura

How much vinyl does it take to wrap a McLaren Artura?

It takes about 43 ft (13 m) for the convertible to 57 ft (17.5 m) for the coupe, with 60-inch (1.52 m) cast film. The amount of vinyl for a McLaren Artura depends on which body style you have. The convertible uses less film because it has no roof to cover, while the coupe uses more.

Is the top of an Artura wrapped?

No, the fabric top of an Artura is not wrapped. The vinyl ends where the top begins, leaving the fabric exposed. A folding hard top is wrapped as its own panels, so it can be covered.

Which Artura body takes more film?

The coupe takes more film than the convertible. The film estimate for the Artura is about 43 ft (13 m) for the convertible and 57 ft (17.5 m) for the coupe. The difference is the roof area that the coupe has and the convertible does not.

Can I wrap only the hood or the roof of an Artura?

Yes, you can wrap only the hood or the roof of an Artura. A partial wrap covers the roof, the hood, or the mirror caps as smaller jobs. This lets you change part of the car without a full wrap.