Wraps by car

Mercury Capri wrap

The Mercury Capri wrap covers the first-generation 1990–1995 convertible, a compact two-door body. A full vinyl wrap of this open-top car takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. The catalog includes one generation with its own film estimate for planning.

1generations12.5 mof film for a full wrap

Mercury Capri, first generation, factory photo
Mercury Capri, first generation. Factory color shown.

Mercury Capri wrap colors and ideas

  • Capri black wrap
  • Capri white wrap
  • Capri gray wrap
  • Capri silver wrap
  • Capri red wrap
  • Capri blue wrap
  • Capri green wrap
  • Capri yellow wrap
  • Capri orange wrap
  • Capri purple wrap
  • Capri pink wrap
  • Capri teal wrap
  • Capri brown wrap
  • Capri gold wrap
  • Capri chrome wrap
  • Capri color shift wrap
  • Capri carbon fiber wrap
  • Capri camo and patterned wrap

How much vinyl to wrap a Mercury Capri

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1990–1995convertible (2 doors)166.1 in (4,219 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)

Capri wrap cost factors

Capri wrap cost follows the small convertible size of the 1990–1995 Capri and the film choice for its one generation. A full wrap needs about 41 ft (12.5 m) of 60-inch (1.52 m) cast film, while chrome or patterned film runs about 49 ft (15 m). The uncovered fabric top removes one large surface from the job, so the cost reflects a body without a roof.

  • Film for a full wrap: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Capri wraps by generation

Swipe sideways. Tap a card for the full description.

Mercury Capri, first generation, factory photo
Factory color shown

1990–1995 Capri convertible (first generation)

1990–1995convertible (2 doors)166.1 in (4,219 mm)

The first-generation Mercury Capri is an open-top convertible from 1990 to 1995. Its fabric top is not wrapped, and the film ends cleanly where the top begins. The folding hard top, if fitted, is wrapped as its own set of panels. This detail keeps the wrap edges tidy on a car built around an open roof.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Roof, hood, chrome delete and PPF on a Capri

Partial wrap jobs on a Mercury Capri include the hood, mirror caps, and rear deck as separate pieces. Capri chrome delete covers window trim and badges with black film. Paint protection film (PPF) in clear form guards the front end of this compact convertible.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mercury Capri: body, cut-outs and film

A Mercury Capri vinyl wrap has to follow a small convertible body that is 166.1 in (4,219 mm) long. The fabric top is not wrapped, so the film stops where the roof begins. The two-door body keeps the job compact but calls for careful wrapping around the rear deck and doors.

Capri wrap ideas work around a fabric roof that stays uncovered and ends the film at its edge. The front bumper, hood, and door edges benefit from time spent on cut-outs and tucked film. Mirror caps and the rear deck are wrapped as separate panels for cleaner lines.

How much vinyl to wrap a Capri depends on the body size of the single 1990–1995 generation. The estimate for the newest body sits at about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. A chrome or patterned film lifts the estimate to about 49 ft (15 m). These numbers assume a full wrap with no top to cover.

Questions about wrapping a Mercury Capri

How much vinyl does it take to wrap a Mercury Capri?

A Mercury Capri wrap takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film for a full job on the newest 1990–1995 body. The fabric top is left uncovered, so those meters go only to the painted panels.

Is the top of a Capri wrapped?

No, the top of a Capri is not wrapped. The fabric roof stays bare, and the film ends where the top begins, keeping a clean line on this convertible.

Can I wrap only the hood or the roof of a Capri?

Yes, you can wrap only the hood or the roof of a Capri. The hood is a standard partial wrap piece, but the fabric roof is not wrapped, so a roof wrap means the rear deck around the top.

Is a Capri hard to wrap?

A Capri is not hard to wrap, but the fabric top adds work because the film must end cleanly at its edge. The car's small 166.1 in (4,219 mm) length keeps panels short, and cut-outs around the doors and mirrors demand careful trimming.