Wraps by car

Mercury Mariner wrap

The Mercury Mariner wrap page covers both generations of this compact SUV, from 2004 to 2010. A full wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 69 ft (21 m).

2generations18 mof film for a full wrap

Mercury Mariner, second generation, factory photo
Mercury Mariner, second generation. Factory color shown.

Mercury Mariner wrap colors and ideas

  • Mariner black wrap
  • Mariner white wrap
  • Mariner gray wrap
  • Mariner silver wrap
  • Mariner red wrap
  • Mariner blue wrap
  • Mariner green wrap
  • Mariner yellow wrap
  • Mariner orange wrap
  • Mariner purple wrap
  • Mariner pink wrap
  • Mariner teal wrap
  • Mariner brown wrap
  • Mariner gold wrap
  • Mariner chrome wrap
  • Mariner color shift wrap
  • Mariner carbon fiber wrap
  • Mariner camo and patterned wrap

How much vinyl to wrap a Mercury Mariner

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2007–2010SUV (5 doors)175.2 in (4,450 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
2004–2007SUV (5 doors)175.2 in (4,450 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Mariner wrap cost factors

Mariner wrap cost depends on the size of the vehicle and the film you choose. A 175.2 in (4,450 mm) SUV uses about 59 ft (18 m) of cast film. Chrome or patterned film raises the amount to about 69 ft (21 m). Labor for removing parts and wrapping the tailgate also affects the cost.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Mariner wraps by generation

Swipe sideways. Tap a card for the full description.

Mercury Mariner, second generation, factory photo
Factory color shown

2007–2010 Mariner SUV (second generation)

2007–2010SUV (5 doors)175.2 in (4,450 mm)

The second-generation Mariner, built from 2007 to 2010, is a five-door SUV with paint age a wrapper must check. Panels on a car of these years may be original or repainted, so a test spot comes before a full wrap. Good adhesion on every panel matters before you commit to the full job.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Mercury Mariner, first generation, factory photo
Factory color shown

2004–2007 Mariner SUV (first generation)

2004–2007SUV (5 doors)175.2 in (4,450 mm)

The first-generation Mariner, built from 2004 to 2007, shares its size and five-door body with the later model. Its length of 175.2 in (4,450 mm) means about 59 ft (18 m) of film for a full wrap. The large hood, roof, and side panels require careful handling of wide film pieces.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Mariner

Partial wrap jobs on a Mariner include the roof, hood, and mirror caps for a color change. Mariner chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mercury Mariner: body, cut-outs and film

A Mercury Mariner vinyl wrap covers a five-door SUV body that is 175.2 in (4,450 mm) long. The upright sides and large panels of an SUV use more film than a small car. The tailgate is a single large panel, so it takes a wide piece of film.

Mariner wrap ideas start with the parts that need extra work on this body. The tailgate has the rear glass in it, so the film ends at the edge of the glass. For a smooth finish, remove door handles, mirror caps, and trim pieces before wrapping.

If you want to know how much vinyl to wrap a Mariner, the two generations are nearly identical in size. Both the 2007–2010 and the 2004–2007 bodies are 175.2 in (4,450 mm) long. The film estimate is the same for both: 59 ft (18 m) for a full wrap.

Questions about wrapping a Mercury Mariner

How much vinyl does it take to wrap a Mercury Mariner?

A full wrap of a Mercury Mariner takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. If you use chrome or patterned film, the amount goes up to about 69 ft (21 m). The tailgate with rear glass is included in that estimate.

Can I wrap only the hood or the roof of a Mariner?

Yes, you can wrap only the hood or the roof of a Mariner. A partial wrap on this SUV often covers the roof, hood, or mirror caps. The hood and roof are large panels, so each needs a single piece of film.

Is a Mariner hard to wrap?

A Mariner is not especially hard to wrap, but the tailgate adds work because the rear glass is in it. The film must end at the edge of the glass, which takes careful cutting. At 175.2 in (4,450 mm) long, the SUV also needs wide film and a helper for large panels.

How many generations of the Mariner does this page cover?

This page covers two generations of the Mariner. The first generation ran from 2004 to 2007 and the second from 2007 to 2010. Both are five-door SUVs with the same length.