Wraps by car

Mercury Marquis wrap

The Mercury Marquis wrap page covers all four generations of this full-size car. The newest body, the fourth generation from 1983 to 1986, needs about 54 ft (16.5 m) of 60-inch (1.52 m) cast vinyl wrap for a sedan. A wagon of that generation takes about 59 ft (18 m) of the same film.

4generations16.5 mof film for a full wrap

Mercury Marquis, fourth generation, factory photo
Mercury Marquis, fourth generation. Factory color shown.

Mercury Marquis wrap colors and ideas

  • Marquis black wrap
  • Marquis white wrap
  • Marquis gray wrap
  • Marquis silver wrap
  • Marquis red wrap
  • Marquis blue wrap
  • Marquis green wrap
  • Marquis yellow wrap
  • Marquis orange wrap
  • Marquis purple wrap
  • Marquis pink wrap
  • Marquis teal wrap
  • Marquis brown wrap
  • Marquis gold wrap
  • Marquis chrome wrap
  • Marquis color shift wrap
  • Marquis carbon fiber wrap
  • Marquis camo and patterned wrap

How much vinyl to wrap a Mercury Marquis

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1983–1986sedan, wagon (4 or 5 doors)196.5 in (4,991 mm)about 54 ft (16.5 m) for the sedan to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m)
1979–1982sedan, wagon (2 or 5 doors)212.3 in (5,392 mm)about 59 ft (18 m) for the sedan to 66 ft (20 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 84 ft (25.5 m)
1969–1978convertible, coupe, sedan, wagon (2 or 4 or 5 doors)——
1967–1968coupe (2 doors)——

Marquis wrap cost factors

Marquis wrap cost depends on the size of the car, the body style, and the film you choose. A larger generation like the third needs more material than the fourth, so it costs more in film. Wagons take more film than sedans because of the taller roof and tailgate area. The condition of the paint also matters, because older cars may need more preparation before the wrap.

  • Film for a full wrap: about 54 ft (16.5 m) for the sedan to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Marquis wraps by generation

Swipe sideways. Tap a card for the full description.

Mercury Marquis, fourth generation, factory photo
Factory color shown

1983–1986 Marquis sedan, wagon (fourth generation)

1983–1986sedan, wagon (4 or 5 doors)196.5 in (4,991 mm)

The fourth-generation Marquis offers sedan and wagon body styles. Each style has its own panel plan and film amount, with the sedan using about 54 ft (16.5 m) and the wagon about 59 ft (18 m) of 60-inch cast film. The wagon's tailgate and rear glass require careful trimming around the glass edge.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 54 ft (16.5 m) for the sedan to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).

Mercury Marquis, third generation, factory photo
Factory color shown

1979–1982 Marquis sedan, wagon (third generation)

1979–1982sedan, wagon (2 or 5 doors)212.3 in (5,392 mm)

The third-generation Marquis was built from 1979 to 1982. On a car of these years, the paint may be original or repainted, so a test spot comes before a full wrap. The sedan needs about 59 ft (18 m) of film and the wagon about 66 ft (20 m), making it one of the largest Marquis bodies.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 59 ft (18 m) for the sedan to 66 ft (20 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 84 ft (25.5 m).

Mercury Marquis, second generation, factory photo
Factory color shown

1969–1978 Marquis convertible, coupe, sedan, wagon (second generation)

1969–1978convertible, coupe, sedan, wagon (2 or 4 or 5 doors)

The second-generation Marquis includes a convertible body style. For the open top, a fabric roof is not wrapped and the film ends where the fabric begins. A folding hard top is wrapped as its own panels, separately from the rest of the body.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Mercury Marquis, first generation, factory photo
Factory color shown

1967–1968 Marquis coupe (first generation)

1967–1968coupe (2 doors)

The first-generation Marquis is a two-door coupe from 1967 and 1968. Its size and body style mean it needs less film than the later wagons, but each long side door is one large piece of film. The wrap installer must handle large panels carefully to avoid wrinkles and distortion.

Two long side doors: each door is one large piece of film.

Roof, hood, chrome delete and PPF on a Marquis

Partial wrap jobs on a Marquis include the roof, hood, and mirror caps. Marquis chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied as clear film on the front end to guard against stone chips. These smaller jobs are a way to change the look without wrapping the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mercury Marquis: body, cut-outs and film

A Mercury Marquis vinyl wrap is planned around the body style you have. The sedan and wagon of the newest generation are 196.5 in (4,991 mm) long, so they need a manageable amount of film. Earlier generations are longer, up to 212.3 in (5,392 mm), which increases the film area. The number of doors also changes the panel layout, especially on wagons with two or five doors.

Marquis wrap ideas should account for the tailgate on wagon models. The rear glass is set into the tailgate, so the film ends at the edge of the glass. Convertibles from the second generation have a fabric top that is not wrapped, and the film stops where the top begins. A folding hard top on those cars is wrapped as separate panels.

To know how much vinyl to wrap a Marquis, check the generation and body style. A fourth-generation sedan uses about 54 ft (16.5 m) of film, while the wagon takes about 59 ft (18 m). The third-generation cars are larger and need about 59 ft (18 m) for the sedan and 66 ft (20 m) for the wagon. If you choose chrome or patterned film, add up to 50 percent more material.

Questions about wrapping a Mercury Marquis

How much vinyl does it take to wrap a Mercury Marquis?

Yes, a Mercury Marquis needs about 54 ft (16.5 m) of 60-inch cast vinyl for a full wrap of the newest sedan body. A wagon of the same generation takes about 59 ft (18 m) of the same film. These figures assume a standard color change wrap without extra chrome or patterned film.

Which Marquis body takes more film?

The wagon body takes more film than the sedan in every Marquis generation that offers both. For the fourth generation, the wagon needs about 59 ft (18 m) versus 54 ft (16.5 m) for the sedan. In the third generation, the wagon takes about 66 ft (20 m) compared to 59 ft (18 m) for the sedan.

Can I wrap only the hood or the roof of a Marquis?

Yes, you can wrap only the hood or the roof of a Marquis. Partial wrap options include the roof, hood, and mirror caps. You can also choose a chrome delete for the window trim and badges, or paint protection film on the front end.

Is a Marquis hard to wrap?

A Marquis is not especially hard to wrap, but it has some challenges. The large body panels, especially on the first-generation coupe with its long doors, require careful handling. Wagons have a tailgate with the rear glass in it, so the film must end at the edge of the glass. Convertibles have a fabric top that is not wrapped, and the film stops where the top begins.