Wraps by car

Mercury Eight wrap

The Mercury Eight wrap page covers all three generations of the Mercury Eight from 1939 to 1951. A full wrap of the newest body takes about 62 ft (19 m) of vinyl wrap for the convertible. For the wagon, a full wrap takes up to 74 ft (22.5 m) of 60-inch (1.52 m) cast film. Use the film estimates here to plan your Mercury Eight wrap.

3generations19 mof film for a full wrap

Mercury Eight, third generation, factory photo
Mercury Eight, third generation. Factory color shown.

Mercury Eight wrap colors and ideas

  • Eight black wrap
  • Eight white wrap
  • Eight gray wrap
  • Eight silver wrap
  • Eight red wrap
  • Eight blue wrap
  • Eight green wrap
  • Eight yellow wrap
  • Eight orange wrap
  • Eight purple wrap
  • Eight pink wrap
  • Eight teal wrap
  • Eight brown wrap
  • Eight gold wrap
  • Eight chrome wrap
  • Eight color shift wrap
  • Eight carbon fiber wrap
  • Eight camo and patterned wrap

How much vinyl to wrap a Mercury Eight

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1949–1951convertible, coupe, sedan, wagon (2 or 4 or 5 doors)206.8 in (5,253 mm) to 213.9 in (5,433 mm)about 62 ft (19 m) for the convertible to 74 ft (22.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 84 ft (25.5 m)
1941–1948convertible, coupe, sedan, wagon (2 or 4 or 5 doors)——
1939–1940convertible, coupe, sedan (2 or 4 doors)——

Eight wrap cost factors

Eight wrap cost depends on body style, film amount, and surface condition. A wagon needs up to 74 ft (22.5 m) of film, while a convertible starts at about 62 ft (19 m). Chrome or patterned film can raise the amount to about 84 ft (25.5 m). The installer also checks panel condition before quoting.

  • Film for a full wrap: about 62 ft (19 m) for the convertible to 74 ft (22.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 84 ft (25.5 m).
  • Body: convertible, coupe, sedan, wagon (2 or 4 or 5 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Eight wraps by generation

Swipe sideways. Tap a card for the full description.

Mercury Eight, third generation, factory photo
Factory color shown

1949–1951 Eight convertible, coupe, sedan, wagon (third generation)

1949–1951convertible, coupe, sedan, wagon (2 or 4 or 5 doors)206.8 in (5,253 mm) to 213.9 in (5,433 mm)

The open top of the Mercury Eight in the third generation is handled without wrapping the fabric. Film ends where the fabric top begins, and a folding hard top is wrapped as its own panels. This keeps the wrap clean around the top edges. The convertible body needs careful masking at those seams.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 62 ft (19 m) for the convertible to 74 ft (22.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 84 ft (25.5 m).

Mercury Eight, second generation, factory photo
Factory color shown

1941–1948 Eight convertible, coupe, sedan, wagon (second generation)

1941–1948convertible, coupe, sedan, wagon (2 or 4 or 5 doors)

The body styles of the second generation Mercury Eight decide the panel plan and film amount. Convertible, coupe, sedan, and wagon each have different panel layouts. The wagon has more sheet metal to cover than the coupe. The installer counts each panel before cutting film.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Mercury Eight, first generation, factory photo
Factory color shown

1939–1940 Eight convertible, coupe, sedan (first generation)

1939–1940convertible, coupe, sedan (2 or 4 doors)

Paint age on a first generation Mercury Eight may be original or repainted. Before a full wrap, a test spot is placed to check how the film adheres. Old paint can lift or react differently under vinyl. This step protects the finish on 1939–1940 cars.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Roof, hood, chrome delete and PPF on an Eight

Partial wrap on an Eight covers jobs like the roof, hood, or mirror caps. Eight chrome delete uses black film on window trim and badges. Paint protection film (PPF) can be applied as clear film on the front end. These smaller jobs fit owners who do not want a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mercury Eight: body, cut-outs and film

Mercury Eight vinyl wrap needs a plan that fits the body style and size. The convertible, coupe, sedan, and wagon all differ in panel count and film use. The car measures from 206.8 in (5,253 mm) to 213.9 in (5,433 mm) long. A wagon has more surface area than a convertible, so film needs rise.

Eight wrap ideas must account for parts that need cut-outs or come off. Convertible bodies with a fabric top are not wrapped, and the film ends where the top begins. A folding hard top is wrapped as separate panels of its own. A tailgate with rear glass in it gets film that ends at the edge of the glass.

How much vinyl to wrap an Eight changes between generations. The first generation, 1939–1940, offered convertible, coupe, and sedan with two or four doors. The second generation, 1941–1948, added a wagon body style. The third generation, 1949–1951, kept the wagon and pushed film needs to about 74 ft (22.5 m) for that style.

Questions about wrapping a Mercury Eight

How much vinyl does it take to wrap a Mercury Eight?

A Mercury Eight takes about 62 ft (19 m) of vinyl for a convertible to 74 ft (22.5 m) for a wagon, using 60-inch (1.52 m) cast film. Chrome or patterned film can raise the amount to about 84 ft (25.5 m). The body style and size set the final figure.

Is the top of an Eight wrapped?

No, a fabric top on a Mercury Eight is not wrapped, and the film ends where the top begins. A folding hard top is wrapped as separate panels of its own. This keeps the top edges clean and damage-free.

Which Eight body takes more film?

The wagon takes more film than other Mercury Eight bodies. A wagon needs up to 74 ft (22.5 m), while a convertible starts at about 62 ft (19 m). The coupe and sedan fall between those figures.

Can I wrap only the hood or the roof of an Eight?

Yes, you can wrap only the hood or the roof of a Mercury Eight as a partial wrap. Partial options also include mirror caps and chrome delete on window trim and badges. Paint protection film on the front end is another smaller job.