Wraps by car

Mercury Colony Park wrap

This page covers the Mercury Colony Park wrap, the full-size wagon built from 1959 to 1991. The catalog includes six generations of the Colony Park. A full vinyl wrap of the newest body takes about 69 ft (21 m) of 60-inch (1.52 m) cast film.

6generations

Mercury Colony Park, sixth generation, factory photo
Mercury Colony Park, sixth generation. Factory color shown.

Mercury Colony Park wrap colors and ideas

  • Colony Park black wrap
  • Colony Park white wrap
  • Colony Park gray wrap
  • Colony Park silver wrap
  • Colony Park red wrap
  • Colony Park blue wrap
  • Colony Park green wrap
  • Colony Park yellow wrap
  • Colony Park orange wrap
  • Colony Park purple wrap
  • Colony Park pink wrap
  • Colony Park teal wrap
  • Colony Park brown wrap
  • Colony Park gold wrap
  • Colony Park chrome wrap
  • Colony Park color shift wrap
  • Colony Park carbon fiber wrap
  • Colony Park camo and patterned wrap

How much vinyl to wrap a Mercury Colony Park

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1979–1991wagon (5 doors)——
1969–1978wagon (5 doors)220.5 in (5,601 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)
1965–1968wagon (5 doors)——
1961–1964wagon (5 doors)——
1959–1960wagon (5 doors)——
1957–1958wagon (5 doors)——

Colony Park wrap cost factors

Colony Park wrap cost depends on the size of the generation and the film finish. The 1969–1978 wagon needs about 69 ft (21 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises that figure to about 87 ft (26.5 m). Extra work on the tailgate glass and old paint also affects the final cost.

  • Body: wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Colony Park wraps by generation

Swipe sideways. Tap a card for the full description.

Mercury Colony Park, sixth generation, factory photo
Factory color shown

1979–1991 Colony Park wagon (sixth generation)

1979–1991wagon (5 doors)

The Mercury Colony Park sixth generation ran from 1979 to 1991 as a five-door wagon. Paint age is a real factor on a car of these years. Panels may be original or repainted, so a test spot comes before a full wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Mercury Colony Park, fifth generation, factory photo
Factory color shown

1969–1978 Colony Park wagon (fifth generation)

1969–1978wagon (5 doors)220.5 in (5,601 mm)

The Mercury Colony Park fifth generation ran from 1969 to 1978 as a five-door wagon. This body is 220.5 in (5,601 mm) long, which makes it one of the largest cars to wrap. You need about 69 ft (21 m) of 60-inch (1.52 m) cast film for a full color change. Chrome or patterned film raises the estimate to about 87 ft (26.5 m).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Mercury Colony Park, fourth generation, factory photo
Factory color shown

1965–1968 Colony Park wagon (fourth generation)

1965–1968wagon (5 doors)

The Mercury Colony Park fourth generation ran from 1965 to 1968 as a five-door wagon. The tall wagon body means more film per panel than a sedan. The tailgate with rear glass in it adds time because the film ends at the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Mercury Colony Park, third generation, factory photo
Factory color shown

1961–1964 Colony Park wagon (third generation)

1961–1964wagon (5 doors)

The Mercury Colony Park third generation ran from 1961 to 1964 as a five-door wagon. The long roof and large side panels are the main areas to cover. The tailgate has the rear glass in it, so the installer must cut the film at the glass edge.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Mercury Colony Park, second generation, factory photo
Factory color shown

1959–1960 Colony Park wagon (second generation)

1959–1960wagon (5 doors)

The Mercury Colony Park second generation ran from 1959 to 1960 as a five-door wagon. This early wagon has a shorter body than the later ones, so it uses less film. The tailgate with rear glass in it still requires careful trimming.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Mercury Colony Park, first generation, factory photo
Factory color shown

1957–1958 Colony Park wagon (first generation)

1957–1958wagon (5 doors)

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Roof, hood, chrome delete and PPF on a Colony Park

A partial wrap on a Mercury Colony Park can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end. These jobs use less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mercury Colony Park: body, cut-outs and film

A Mercury Colony Park vinyl wrap covers a long five-door wagon body. The wagon has a tall roof line, large side panels, and a rear tailgate. All these panels add surface area compared with a sedan. The installer works panel by panel around the full length of the car.

Colony Park wrap ideas start with a tailgate that has the rear glass in it. The film ends at the edge of the glass, so the tailgate needs careful trimming. Door handles, badges, and trim pieces can also be removed for a cleaner finish.

How much vinyl to wrap a Colony Park depends on the generation. The fifth generation, from 1969 to 1978, is 220.5 in (5,601 mm) long and needs about 69 ft (21 m) of film. For chrome or patterned film, plan on about 87 ft (26.5 m) on that generation. Earlier and later bodies are shorter, so they use a little less film.

Questions about wrapping a Mercury Colony Park

How much vinyl does it take to wrap a Mercury Colony Park?

It takes about 69 ft (21 m) of 60-inch (1.52 m) cast film to wrap a Mercury Colony Park. That figure is for the newest body, the sixth generation from 1979 to 1991. For chrome or patterned film on the fifth generation, plan on about 87 ft (26.5 m).

Can I wrap only the hood or the roof of a Colony Park?

Yes, you can wrap only the hood or the roof of a Colony Park. A partial wrap can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end.

Is a Colony Park hard to wrap?

A Colony Park is not hard to wrap, but the tailgate adds work. The rear glass is in the tailgate, so the film ends at the edge of the glass. The wagon is also long, which means more panels and more film.

How many generations of the Colony Park does this page cover?

This page covers six generations of the Mercury Colony Park. The generations run from the second generation in 1959–1960 to the sixth generation in 1979–1991.