Wraps by car

Mercury Villager wrap

This page covers Mercury Villager wrap options across the two generations made from 1992 to 2002. A full wrap of the newest body takes about 74 ft (22.5 m) of 60-inch (1.52 m) cast vinyl wrap, or about 85 ft (26 m) for chrome or patterned film.

2generations22.5 mof film for a full wrap

Mercury Villager, second generation, factory photo
Mercury Villager, second generation. Factory color shown.

Mercury Villager wrap colors and ideas

  • Villager black wrap
  • Villager white wrap
  • Villager gray wrap
  • Villager silver wrap
  • Villager red wrap
  • Villager blue wrap
  • Villager green wrap
  • Villager yellow wrap
  • Villager orange wrap
  • Villager purple wrap
  • Villager pink wrap
  • Villager teal wrap
  • Villager brown wrap
  • Villager gold wrap
  • Villager chrome wrap
  • Villager color shift wrap
  • Villager carbon fiber wrap
  • Villager camo and patterned wrap

How much vinyl to wrap a Mercury Villager

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2002van (4 doors)194.9 in (4,950 mm)about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m)
1992–1998van (5 doors)194.7 in (4,945 mm)about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m)

Villager wrap cost factors

Villager wrap cost depends on the film type, the size of the van, and whether you choose a full or partial wrap. The Villager is 194.7 in (4,945 mm) or 194.9 in (4,950 mm) long depending on generation, so it uses more film than a smaller car. Labor also varies with the height of 70.1 in (1,780 mm) and the work around the sliding door tracks.

  • Film for a full wrap: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).
  • Body: van (4 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (70.1 in (1,780 mm)): the roof is wrapped from a platform.

Villager wraps by generation

Swipe sideways. Tap a card for the full description.

Mercury Villager, second generation, factory photo
Factory color shown

1998–2002 Villager van (second generation)

1998–2002van (4 doors)194.9 in (4,950 mm)

The second generation Mercury Villager (1998–2002) has sliding side doors where the tracks stay bare and decide where the film is cut. The film is trimmed along the track edges so the doors still slide freely. This generation is a van with four doors and measures 194.9 in (4,950 mm) long.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (70.1 in (1,780 mm)): the roof is wrapped from a platform.

Film: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).

Mercury Villager, first generation, factory photo
Factory color shown

1992–1998 Villager van (first generation)

1992–1998van (5 doors)194.7 in (4,945 mm)

The first generation Mercury Villager (1992–1998) often has older paint, so panels may be original or repainted and a test spot comes before a full wrap. On a car of these years, the installer checks adhesion on each surface. This generation is a van with five doors and measures 194.7 in (4,945 mm) long.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (70.1 in (1,780 mm)): the roof is wrapped from a platform.

Film: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).

Roof, hood, chrome delete and PPF on a Villager

For a Villager, a partial wrap can cover the roof, hood, or mirror caps without wrapping the whole van. Villager chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied to the front end as clear film.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mercury Villager: body, cut-outs and film

The Mercury Villager vinyl wrap is shaped by its minivan body, which came only as a van with four or five doors. First generation vans measure 194.7 in (4,945 mm) long and second generation vans measure 194.9 in (4,950 mm). The tall body reaches 70.1 in (1,780 mm), so wrapping the roof requires a platform and extra care.

Villager wrap ideas start with the sliding side doors, where the door tracks stay bare and the film is cut along them. Door handles, mirrors, and badges are removed or cut around for a clean finish. The roof is wrapped from a platform because of the van's height.

How much vinyl to wrap a Villager depends on the generation, but both use the same estimate of about 74 ft (22.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 85 ft (26 m) to match the minivan's panels. Extra film is always wise for mistakes and complex areas like the sliding doors.

Questions about wrapping a Mercury Villager

How much vinyl does it take to wrap a Mercury Villager?

About 74 ft (22.5 m) of 60-inch (1.52 m) vinyl wrap is typically needed to wrap a Mercury Villager. For chrome or patterned film, plan on about 85 ft (26 m). These estimates cover the newest body style from 1998–2002.

Are the sliding doors of a Villager wrapped?

Yes, the sliding doors of a Villager are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors can open and close without catching.

Can I wrap only the hood or the roof of a Villager?

Yes, you can wrap only the hood or the roof of a Villager. A partial wrap often includes the roof, hood, or mirror caps, and is a smaller job than a full wrap.

Is a Villager hard to wrap?

A Villager is not hard to wrap, but it has some extra steps. The tall body (70.1 in (1,780 mm)) means the roof is wrapped from a platform, and the sliding door tracks require careful cutting.