Wraps by car

Mercury Topaz wrap

A Mercury Topaz wrap covers this compact coupe or sedan in a durable layer of color or protection. The Topaz has two generations in this catalog, from 1983 through 1994. A full wrap of the newest body takes about 49 to 51 ft (15 to 15.5 m) of 60-inch (1.52 m) cast vinyl film, depending on the body style.

2generations15 mof film for a full wrap

Mercury Topaz, second generation, factory photo
Mercury Topaz, second generation. Factory color shown.

Mercury Topaz wrap colors and ideas

  • Topaz black wrap
  • Topaz white wrap
  • Topaz gray wrap
  • Topaz silver wrap
  • Topaz red wrap
  • Topaz blue wrap
  • Topaz green wrap
  • Topaz yellow wrap
  • Topaz orange wrap
  • Topaz purple wrap
  • Topaz pink wrap
  • Topaz teal wrap
  • Topaz brown wrap
  • Topaz gold wrap
  • Topaz chrome wrap
  • Topaz color shift wrap
  • Topaz carbon fiber wrap
  • Topaz camo and patterned wrap

How much vinyl to wrap a Mercury Topaz

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1987–1994coupe, sedan (2 or 4 doors)176.8 in (4,490 mm)about 49 ft (15 m) for the coupe to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m)
1983–1987coupe, sedan (2 or 4 doors)176.8 in (4,490 mm)about 49 ft (15 m) for the coupe to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m)

Topaz wrap cost factors

Topaz wrap cost depends mainly on the film you choose and how much of the body you cover, not on hidden extras of this simple car. Standard 60-inch (1.52 m) cast film covers the whole car with 49 to 51 ft (15 to 15.5 m), and a chrome or patterned film needs up to about 62 ft (19 m) to match the pattern. Body style changes the amount only slightly, with the sedan taking a little more film than the coupe. Because the Topaz is a compact, a full wrap uses less material than a midsize or full-size car, and that lowers the cost relative to larger vehicles.

  • Film for a full wrap: about 49 ft (15 m) for the coupe to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).
  • Body: coupe, sedan (2 or 4 doors).

Topaz wraps by generation

Swipe sideways. Tap a card for the full description.

Mercury Topaz, second generation, factory photo
Factory color shown

1987–1994 Topaz coupe, sedan (second generation)

1987–1994coupe, sedan (2 or 4 doors)176.8 in (4,490 mm)

The second generation Mercury Topaz, made from 1987 to 1994, comes as a coupe or a sedan with either two or four doors. Those styles decide the panel plan and the film amount, with the coupe taking about 49 ft (15 m) and the sedan about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. The parts are the same as the earlier cars, so the wrap work is nearly identical. Only the door count changes how the lower side film is cut.

Film: about 49 ft (15 m) for the coupe to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).

Mercury Topaz, first generation, factory photo
Factory color shown

1983–1987 Topaz coupe, sedan (first generation)

1983–1987coupe, sedan (2 or 4 doors)176.8 in (4,490 mm)

The first generation Mercury Topaz ran from 1983 to 1987 and offered the same coupe and sedan bodies as the later cars. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap to make sure the film bonds safely. The film estimate is about 49 ft (15 m) for a coupe and 51 ft (15.5 m) for a sedan, unchanged from the second generation. Paint age is the key variable, not the shape of the car.

Film: about 49 ft (15 m) for the coupe to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Topaz

A partial wrap on a Mercury Topaz can cover the roof, the hood, or just the mirror caps for a smaller color change. Topaz chrome delete is another partial job: the bright window trim and the badges are covered with black film to change the look without touching the paint. Clear paint protection film (PPF) on the front end guards the hood, fenders, and bumper from stone chips. These jobs use far less film than a full wrap and still change the car's appearance or its protection.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mercury Topaz: body, cut-outs and film

The Mercury Topaz vinyl wrap is shaped by the simple coupe and sedan body styles and the car's modest 176.8 in (4,490 mm) length. Two-door and four-door versions share the same overall size, so the panel count differs only around the rear side windows. This compact body has flat, broad panels that let the film lay down with fewer relief cuts than on a curvier car. A shop can wrap one without unusual extra film beyond the standard 49 to 51 ft (15 to 15.5 m) for a full color change.

Wrapping a Topaz means planning cut-outs for the door handles, mirrors, badges, and the bright trim around the side windows. The bumpers come off separately, and the door rub strips are best removed for a clean edge. Topaz wrap ideas often start with keeping the chrome trim untouched or covering it in black as part of the design. The factory pinstripe on later cars should be sanded flat before the film goes over it.

Knowing how much vinyl to wrap a Topaz means counting the same panel sizes for both generations, since the cars share the 176.8 in (4,490 mm) length. The first generation from 1983 to 1987 and the second from 1987 to 1994 use the same coupe and sedan bodies, so the film estimate stays about 49 ft (15 m) for a coupe and 51 ft (15.5 m) for a sedan. The only real change for someone ordering film is the color or finish, because the body dimensions do not move between generations.

Questions about wrapping a Mercury Topaz

How much vinyl does it take to wrap a Mercury Topaz?

Yes, a full Mercury Topaz wrap takes about 49 to 51 ft (15 to 15.5 m) of 60-inch (1.52 m) cast vinyl film depending on the body style. The coupe is at the lower end of that range and the sedan at the upper end, because the sedan has two more doors and slightly more surface around the rear side windows. A chrome or patterned film can push the total toward 62 ft (19 m) to keep the pattern aligned across the panels.

Which Topaz body takes more film?

The sedan takes more film than the coupe, although the difference is only about 2 ft (0.5 m) on a Mercury Topaz. The coupe needs about 49 ft (15 m) of 60-inch (1.52 m) cast film, while the sedan needs about 51 ft (15.5 m). The extra material goes to the rear doors and the area around the four side windows, which a coupe does not have. Both bodies are the same length, so the amount stays close between the two styles.

Can I wrap only the hood or the roof of a Topaz?

Yes, a Mercury Topaz hood or roof can be wrapped on its own as a partial wrap, and it needs much less film than a full wrap. Mirror caps are another small partial job that changes the look right away. A chrome delete that covers only the window trim and badges is also done without wrapping the whole car. These partial jobs use leftover pieces of cast film and keep the cost and material use low.

Is a Topaz hard to wrap?

A Topaz is not a hard car to wrap, but the door rub strips and the bright trim around the side windows add work. The panels are fairly flat and the car is compact at 176.8 in (4,490 mm), so the vinyl lays down without fighting deep curves. The main extra step is removing or cutting around the rub strips and deciding how to handle the chrome trim. A careful installer can wrap it cleanly with 49 to 51 ft (15 to 15.5 m) of film, plus time for those small parts.