Wraps by car

Mercury Sable wrap

The Mercury Sable wrap page covers all five generations of this full-size car. A full wrap of the newest body, the fifth generation sedan from 2007 to 2009, takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds about 10 ft (3 m) to that figure.

5generations19 mof film for a full wrap

Mercury Sable, fifth generation, factory photo
Mercury Sable, fifth generation. Factory color shown.

Mercury Sable wrap colors and ideas

  • Sable black wrap
  • Sable white wrap
  • Sable gray wrap
  • Sable silver wrap
  • Sable red wrap
  • Sable blue wrap
  • Sable green wrap
  • Sable yellow wrap
  • Sable orange wrap
  • Sable purple wrap
  • Sable pink wrap
  • Sable teal wrap
  • Sable brown wrap
  • Sable gold wrap
  • Sable chrome wrap
  • Sable color shift wrap
  • Sable carbon fiber wrap
  • Sable camo and patterned wrap

How much vinyl to wrap a Mercury Sable

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2007–2009sedan (4 doors)200.4 in (5,090 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)
1999–2005sedan, wagon (4 or 5 doors)197.7 in (5,022 mm) to 200.5 in (5,093 mm)about 56 ft (17 m) for the sedan to 61 ft (18.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m)
1995–1999sedan, wagon (4 or 5 doors)199.2 in (5,060 mm) to 199.6 in (5,070 mm)about 56 ft (17 m) for the sedan to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m)
1991–1995sedan, wagon (4 or 5 doors)192.2 in (4,882 mm) to 193.3 in (4,910 mm)about 54 ft (16.5 m) for the sedan to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m)
1986–1991sedan, wagon (4 or 5 doors)192.2 in (4,882 mm) to 193.3 in (4,910 mm)about 54 ft (16.5 m) for the sedan to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m)

Sable wrap cost factors

Sable wrap cost depends on the film amount, the body style, and the labor for the specific generation. A wagon takes more film than a sedan of the same generation, up to about 77 ft (23.5 m) for chrome or patterned film on the fourth generation. Removing trim and badges adds time, as does wrapping a tailgate on wagons. Paint condition on older cars matters, since a test spot may be needed before a full wrap.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: sedan (4 doors).

Sable wraps by generation

Swipe sideways. Tap a card for the full description.

Mercury Sable, fifth generation, factory photo
Factory color shown

2007–2009 Sable sedan (fifth generation)

2007–2009sedan (4 doors)200.4 in (5,090 mm)

The fifth generation Mercury Sable is a full-size sedan from 2007 to 2009. Paint age is the main concern on a car of these years, as panels may be original or repainted. A test spot comes before a full wrap to check paint adhesion. The body is 200.4 in (5,090 mm) long and takes about 62 ft (19 m) of 60-inch cast film.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Mercury Sable, fourth generation, factory photo
Factory color shown

1999–2005 Sable sedan, wagon (fourth generation)

1999–2005sedan, wagon (4 or 5 doors)197.7 in (5,022 mm) to 200.5 in (5,093 mm)

The fourth generation Mercury Sable from 1999 to 2005 came as a sedan or a wagon. The body style decides the panel plan and the film amount for a wrap. The sedan takes about 56 ft (17 m) of 60-inch cast film, while the wagon takes up to 61 ft (18.5 m). The wagon has a tailgate with the rear glass in it, so the film ends at the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 56 ft (17 m) for the sedan to 61 ft (18.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m).

Mercury Sable, third generation, factory photo
Factory color shown

1995–1999 Sable sedan, wagon (third generation)

1995–1999sedan, wagon (4 or 5 doors)199.2 in (5,060 mm) to 199.6 in (5,070 mm)

The third generation Mercury Sable from 1995 to 1999 was built as a sedan or a wagon. Its length of 199.2 in (5,060 mm) to 199.6 in (5,070 mm) means a full wrap uses about 56 ft (17 m) for the sedan and up to 62 ft (19 m) for the wagon. The wagon tailgate has rear glass, and the film stops at the glass edge. The number of panels is similar to other full-size cars, but the wagon adds a tailgate panel.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 56 ft (17 m) for the sedan to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m).

Mercury Sable, second generation, factory photo
Factory color shown

1991–1995 Sable sedan, wagon (second generation)

1991–1995sedan, wagon (4 or 5 doors)192.2 in (4,882 mm) to 193.3 in (4,910 mm)

The second generation Mercury Sable from 1991 to 1995 came as a sedan or a wagon. At 192.2 in (4,882 mm) to 193.3 in (4,910 mm) long, it takes about 54 ft (16.5 m) of film for the sedan and 59 ft (18 m) for the wagon. The wagon tailgate includes the rear glass, so the film ends at the edge of the glass. The panel count is typical for a full-size car of this era.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 54 ft (16.5 m) for the sedan to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).

Mercury Sable, first generation, factory photo
Factory color shown

1986–1991 Sable sedan, wagon (first generation)

1986–1991sedan, wagon (4 or 5 doors)192.2 in (4,882 mm) to 193.3 in (4,910 mm)

The first generation Mercury Sable from 1986 to 1991 offered sedan and wagon bodies. Its length of 192.2 in (4,882 mm) to 193.3 in (4,910 mm) calls for about 54 ft (16.5 m) of film on the sedan and 59 ft (18 m) on the wagon. The wagon tailgate has rear glass, and the film ends at the glass edge. The body style affects the number of panels, with the wagon adding a tailgate.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 54 ft (16.5 m) for the sedan to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Sable

For a Mercury Sable, a partial wrap covers the roof, hood, or mirror caps individually. Chrome delete means covering the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These jobs use less film than a full wrap and are a way to change the look of one area.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mercury Sable: body, cut-outs and film

A Mercury Sable vinyl wrap is planned around its body style and size. The fifth generation is a sedan only, at 200.4 in (5,090 mm) long, which gives long roof and side panels. Earlier generations offered a wagon with a tailgate, which changes the panel layout. The wagon also adds a little more film than the sedan of the same generation.

Sable wrap ideas should account for the usual cut-outs and removed parts. Door handles, mirrors, and badges are removed or cut around for a clean finish. Wagon models have a tailgate with the rear glass in it, and the film ends at the edge of the glass. The front and rear bumpers are wrapped on the car with careful relief cuts.

How much vinyl to wrap a Sable depends on the generation and body style. The fifth generation sedan takes about 62 ft (19 m) of 60-inch film. The fourth and third generation sedans take about 56 ft (17 m), while their wagons take up to 62 ft (19 m). The first and second generations take about 54 ft (16.5 m) for the sedan and 59 ft (18 m) for the wagon.

Questions about wrapping a Mercury Sable

How much vinyl does it take to wrap a Mercury Sable?

A full wrap of a Mercury Sable takes about 62 ft (19 m) of 60-inch (1.52 m) cast film for the fifth generation sedan. Chrome or patterned film adds about 10 ft (3 m), for a total of about 72 ft (22 m). Earlier generations and wagons have different amounts, from about 54 ft (16.5 m) to 77 ft (23.5 m).

Can I wrap only the hood or the roof of a Sable?

Yes, you can wrap only the hood or the roof of a Sable. A partial wrap can cover the roof, hood, or mirror caps as separate jobs. You can also do a chrome delete on the window trim and badges, or add paint protection film (PPF) to the front end.

Is a Sable hard to wrap?

A Sable is not especially hard to wrap, but its full-size body and certain parts add work. The long roof and side panels require careful handling of large film pieces. Wagon models have a tailgate with the rear glass in it, and the film must end at the edge of the glass. Door handles, mirrors, and badges are removed or cut around, which adds labor time.

How many generations of the Sable does this page cover?

This page covers five generations of the Mercury Sable. They range from the first generation of 1986–1991 to the fifth generation of 2007–2009. Each generation is described with its body styles, dimensions, and film estimates.