Wraps by car

Mercury Tracer wrap

The Mercury Tracer wrap page covers the compact sedan and wagon built from 1991 to 1999. This is the only generation in our catalog. A full vinyl wrap of the newest Tracer body takes about 49 ft (15 m) of film for the sedan. The wagon needs up to 52 ft (16 m) when using 60-inch (1.52 m) cast film.

1generations15 mof film for a full wrap

Mercury Tracer, first generation, factory photo
Mercury Tracer, first generation. Factory color shown.

Mercury Tracer wrap colors and ideas

  • Tracer black wrap
  • Tracer white wrap
  • Tracer gray wrap
  • Tracer silver wrap
  • Tracer red wrap
  • Tracer blue wrap
  • Tracer green wrap
  • Tracer yellow wrap
  • Tracer orange wrap
  • Tracer purple wrap
  • Tracer pink wrap
  • Tracer teal wrap
  • Tracer brown wrap
  • Tracer gold wrap
  • Tracer chrome wrap
  • Tracer color shift wrap
  • Tracer carbon fiber wrap
  • Tracer camo and patterned wrap

How much vinyl to wrap a Mercury Tracer

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1991–1999sedan, wagon (4 or 5 doors)171.3 in (4,352 mm) to 174.8 in (4,440 mm)about 49 ft (15 m) for the sedan to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m)

Tracer wrap cost factors

Tracer wrap cost depends on the body style, film choice and panel condition. A wagon uses more film than a sedan, up to about 52 ft (16 m) versus 49 ft (15 m). Chrome or patterned film raises the material figure to about 67 ft (20.5 m). Rust, dents or old paint add hours of surface preparation.

  • Film for a full wrap: about 49 ft (15 m) for the sedan to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Tracer wraps by generation

Swipe sideways. Tap a card for the full description.

Mercury Tracer, first generation, factory photo
Factory color shown

1991–1999 Tracer sedan, wagon (first generation)

1991–1999sedan, wagon (4 or 5 doors)171.3 in (4,352 mm) to 174.8 in (4,440 mm)

The first generation Mercury Tracer offers a sedan and a wagon from 1991 to 1999. The sedan is 171.3 in (4,352 mm) long and the wagon is 174.8 in (4,440 mm). A full wrap uses about 49 ft (15 m) of film on the sedan. The wagon takes about 52 ft (16 m) of 60-inch (1.52 m) cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) for the sedan to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Tracer

Tracer chrome delete covers the window trim and badges with black film, a job smaller than a full wrap. A partial wrap on this car can be the roof, hood or mirror caps only. Paint protection film (PPF) is clear film applied to the front end. These options let you change or protect one area without wrapping the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mercury Tracer: body, cut-outs and film

Mercury Tracer vinyl wrap work starts with the two body styles, a four-door sedan and a five-door wagon. The sedan measures 171.3 in (4,352 mm) long and the wagon reaches 174.8 in (4,440 mm). These compact dimensions mean a single installer can manage the larger panels. The wagon roof adds surface area and makes the film plan longer.

Tracer wrap ideas should account for the tailgate, which holds the rear glass. The film ends at the edge of that glass, so the tailgate needs a precise cut-out. Door handles, mirrors and badges also come off for a clean install. Keeping those parts removed avoids visible seams.

How much vinyl to wrap a Tracer depends on which body you have. A sedan uses about 49 ft (15 m) of 60-inch (1.52 m) cast film. A wagon uses up to 52 ft (16 m) for the same width. Chrome or patterned film adds waste, so plan up to about 67 ft (20.5 m).

Questions about wrapping a Mercury Tracer

How much vinyl does it take to wrap a Mercury Tracer?

About 49 ft (15 m) of vinyl wraps a Mercury Tracer sedan, and the wagon takes up to 52 ft (16 m) using 60-inch (1.52 m) cast film. The sedan estimate fits the newest body from 1991 to 1999. Chrome or patterned film needs more material, up to about 67 ft (20.5 m).

Which Tracer body takes more film?

The wagon takes more film than the sedan: up to 52 ft (16 m) versus about 49 ft (15 m). That difference comes from the wagon's longer body, 174.8 in (4,440 mm) against the sedan's 171.3 in (4,352 mm). Both figures use 60-inch (1.52 m) cast film.

Can I wrap only the hood or the roof of a Tracer?

Yes, you can wrap only the hood or the roof of a Tracer as a partial wrap. Mirror caps are another single-panel option from the same job list. These smaller jobs use less film and take less time than a full wrap.

Is a Tracer hard to wrap?

A Tracer is not especially hard to wrap, but the tailgate adds work because the rear glass is set into it. The film must end cleanly at the edge of that glass, so the tailgate needs exact cutting. Its compact size, 171.3 in (4,352 mm) to 174.8 in (4,440 mm), keeps the other panels manageable.