Wraps by car

MG 3 wrap

This page covers the MG 3 wrap across its two generations. The MG 3 is a mini hatchback sold from 2011 to now, with a second generation added in 2024. A full vinyl wrap of the newest body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film.

2generations16 mof film for a full wrap

MG 3, second generation, factory photo
MG 3, second generation. Factory color shown.

MG 3 wrap colors and ideas

  • MG 3 black wrap
  • MG 3 white wrap
  • MG 3 gray wrap
  • MG 3 silver wrap
  • MG 3 red wrap
  • MG 3 blue wrap
  • MG 3 green wrap
  • MG 3 yellow wrap
  • MG 3 orange wrap
  • MG 3 purple wrap
  • MG 3 pink wrap
  • MG 3 teal wrap
  • MG 3 brown wrap
  • MG 3 gold wrap
  • MG 3 chrome wrap
  • MG 3 color shift wrap
  • MG 3 carbon fiber wrap
  • MG 3 camo and patterned wrap

How much vinyl to wrap an MG 3

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowhatchback (5 doors)161.9 in (4,113 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
2011–nowhatchback (5 doors)158.2 in (4,018 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

MG 3 wrap cost factors

The MG 3 wrap cost depends on the film quantity, film type, and labor for this car. A full wrap uses about 52 ft (16 m) of cast film, with chrome or patterned film needing about 62 ft (19 m) on the second generation. The first generation needs slightly less chrome or patterned film at 61 ft (18.5 m). Cut-outs for cameras, fog lamps, and parking sensors add preparation time.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

MG 3 wraps by generation

Swipe sideways. Tap a card for the full description.

MG 3, second generation, factory photo
Factory color shown

2024–now MG 3 hatchback (second generation)

2024–nowhatchback (5 doors)161.9 in (4,113 mm)

The second generation MG 3 has an available panoramic glass roof that is not wrapped. The glass roof stays dark whatever the color of the film, creating a two-tone look without extra vinyl. The film ends at the roof rails, so the installers avoid covering the glass panel.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

MG 3, first generation, factory photo
Factory color shown

2011–now MG 3 hatchback (first generation)

2011–nowhatchback (5 doors)158.2 in (4,018 mm)

On the first generation MG 3, paint age is a key factor before wrapping. Cars from 2011 onward may have original or repainted panels, and a test spot checks adhesion. The first generation was restyled in 2013 and 2018, but the body shape remained a five-door hatchback.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on an MG 3

Partial wrap options for the MG 3 include the hood, mirror caps, and roof on cars without the glass panel. The roof wrap applies to both generations when the car lacks a panoramic glass roof or sunroof. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an MG 3: body, cut-outs and film

The MG 3 vinyl wrap is shaped by its five-door hatchback body and compact size. The second generation is 161.9 in (4,113 mm) long, while the first generation is 158.2 in (4,018 mm) long. The roof, hood, bumpers, doors, and tailgate are the main panels to cover. The tailgate includes the rear glass, so the film ends at the edge of the glass.

For MG 3 wrap ideas, plan around the cameras and fog lamps present on every trim of the second generation. The film is cut around each camera lens, and the front bumper needs cut-outs for the fog lamps. Some trims have a panoramic glass roof, which is not wrapped, leaving the roof dark. On the first generation, some trims have parking sensors that require cut-outs in the bumper film.

The amount of vinyl to wrap an MG 3 depends on the generation and film type. The second generation needs about 52 ft (16 m) of standard cast film, or about 62 ft (19 m) if you use chrome or patterned film. The first generation is slightly smaller, taking about 52 ft (16 m) of standard film and 61 ft (18.5 m) of chrome or patterned film. The main difference is the extra allowance for the newer body's details.

Questions about wrapping an MG 3

How much vinyl does it take to wrap an MG 3?

It takes about 52 ft (16 m) of 60-inch (1.52 m) cast film to wrap the newest MG 3. For chrome or patterned film, you need about 62 ft (19 m). This estimate is for a full wrap of the second generation body.

Can the roof of an MG 3 be wrapped?

Yes, the roof of an MG 3 can be wrapped when the car does not have a panoramic glass roof or sunroof. On the second generation, some trims have a panoramic glass roof that is not wrapped. The first generation may have a sunroof, and the roof film is cut around its opening.

Can I wrap only the hood or the roof of an MG 3?

Yes, you can wrap only the hood or the roof of an MG 3. The roof wrap is available for cars without a glass panel or sunroof. A hood wrap or mirror cap wrap are also offered as partial jobs.

Is an MG 3 hard to wrap?

An MG 3 is moderately hard to wrap because of its cut-outs and glass areas. Every trim of the second generation has cameras and fog lamps that require cut-outs in the film. Some trims have a panoramic glass roof that is not wrapped. The tailgate has the rear glass in it, so the film must be trimmed to the edge of the glass.