Wraps by car

MG Marvel R wrap

The MG Marvel R wrap page covers the first generation of this electric SUV, produced from 2021 to now. A full vinyl wrap of the newest body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 7 ft (2 m) more. This page lists the sizes, the tricky parts, and the work that goes into wrapping one.

1generations16.5 mof film for a full wrap

MG Marvel R, first generation, factory photo
MG Marvel R, first generation. Factory color shown.

MG Marvel R wrap colors and ideas

  • Marvel R black wrap
  • Marvel R white wrap
  • Marvel R gray wrap
  • Marvel R silver wrap
  • Marvel R red wrap
  • Marvel R blue wrap
  • Marvel R green wrap
  • Marvel R yellow wrap
  • Marvel R orange wrap
  • Marvel R purple wrap
  • Marvel R pink wrap
  • Marvel R teal wrap
  • Marvel R brown wrap
  • Marvel R gold wrap
  • Marvel R chrome wrap
  • Marvel R color shift wrap
  • Marvel R carbon fiber wrap
  • Marvel R camo and patterned wrap

How much vinyl to wrap an MG Marvel R

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowSUV (5 doors)184.0 in (4,674 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Marvel R wrap cost factors

The Marvel R wrap cost depends on how much film a shop has to cut and how many parts come off the car. The body is 184.0 in (4,674 mm) long, and every trim has a panoramic glass roof, roof rails, a rear spoiler, parking sensors, and cameras. Cutting around each sensor and lens adds labor, and the roof rails have to be removed or worked around. The film itself is about 54 ft (16.5 m) of 60-inch (1.52 m) cast film, and chrome or patterned film takes more.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has a sunroof: the roof film is cut around its opening.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has a rear spoiler: it is wrapped as a piece of its own.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Marvel R wraps by generation

Swipe sideways. Tap a card for the full description.

MG Marvel R, first generation, factory photo
Factory color shown

2021–now Marvel R SUV (first generation)

2021–nowSUV (5 doors)184.0 in (4,674 mm)

The first generation MG Marvel R has a panoramic glass roof that is not wrapped, so the roof stays dark whatever the color of the film. The film ends at the roof rails, which come off before the roof is wrapped or are cut along. Every trim also has a sunroof, so the roof film is cut around its opening. The charge port door is wrapped as a small piece of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has a sunroof: the roof film is cut around its opening.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has a rear spoiler: it is wrapped as a piece of its own.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Marvel R

A partial wrap on a Marvel R can be limited to the hood, mirror caps, tailgate, and rear spoiler. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film on the front end to guard against stone chips. These jobs use less film than a full wrap and can be done without touching the glass roof.

  • Partial wrap: hood, mirror caps, tailgate, rear spoiler.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an MG Marvel R: body, cut-outs and film

An MG Marvel R vinyl wrap has to follow the shape of a five-door SUV that is 184.0 in (4,674 mm) long. The body has few sharp creases, so the film lays down without much stretching. The tall tailgate and the roof area add surface, but the glass roof is not covered. Because the car is electric, the charge port door is wrapped as a small piece of its own.

The main Marvel R wrap ideas start with the parts that need cut-outs: parking sensors in the bumpers and cameras in the body. The tailgate has the rear glass in it, so the film ends at the edge of the glass. The roof rails come off before the roof is wrapped, or the film is cut along them. The rear spoiler is wrapped as a piece of its own.

To work out how much vinyl to wrap a Marvel R, use the first generation figure of about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. The cut for the glass roof and the sunroof opening is not part of that area. A chrome or patterned film needs about 61 ft (18.5 m) because the pattern must be matched. There is only one generation in this catalog, so the film count stays the same for all years.

Questions about wrapping an MG Marvel R

How much vinyl does it take to wrap an MG Marvel R?

It takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film to wrap an MG Marvel R. If you choose chrome or patterned film, the amount goes up to about 61 ft (18.5 m). The figure is for the newest body of the first generation, which is the only one in this catalog.

Can the roof of a Marvel R be wrapped?

No, the roof of a Marvel R cannot be wrapped because every trim has a panoramic glass roof. The film ends at the roof rails, and the roof stays dark whatever the color of the film. The sunroof opening is also cut around, so no film covers the glass.

Can I wrap only the hood or the roof of a Marvel R?

Yes, you can wrap only the hood or the roof of a Marvel R as a partial wrap. The roof itself is glass and not wrapped, so the roof film would be cut around the sunroof opening and end at the roof rails. The hood is wrapped on its own, and mirror caps, tailgate, and rear spoiler are also possible.

Is a Marvel R hard to wrap?

A Marvel R is not the easiest SUV to wrap because of its size and the parts that need care. The body is 184.0 in (4,674 mm) long, and every trim has parking sensors in the bumpers, cameras in the body, roof rails, a rear spoiler, and a glass roof. The film has to be cut around each sensor and lens, and the roof rails come off or are cut along. The charge port door is wrapped as a small piece of its own.