Wraps by car

MG Xpower SV wrap

This page covers the MG Xpower SV wrap, a vinyl wrap project for the 2003–2005 sports car. The catalog holds one generation, the first and only production run of the Xpower SV. A full wrap of this coupe body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film.

1generations15 mof film for a full wrap

MG Xpower SV, first generation, factory photo
MG Xpower SV, first generation. Factory color shown.

MG Xpower SV wrap colors and ideas

  • Xpower SV black wrap
  • Xpower SV white wrap
  • Xpower SV gray wrap
  • Xpower SV silver wrap
  • Xpower SV red wrap
  • Xpower SV blue wrap
  • Xpower SV green wrap
  • Xpower SV yellow wrap
  • Xpower SV orange wrap
  • Xpower SV purple wrap
  • Xpower SV pink wrap
  • Xpower SV teal wrap
  • Xpower SV brown wrap
  • Xpower SV gold wrap
  • Xpower SV chrome wrap
  • Xpower SV color shift wrap
  • Xpower SV carbon fiber wrap
  • Xpower SV camo and patterned wrap

How much vinyl to wrap an MG Xpower SV

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2003–2005coupe (2 doors)176.4 in (4,480 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Xpower SV wrap cost factors

The Xpower SV wrap cost depends on the size of the car and the amount of film. The full body needs about 49 ft (15 m) of 60-inch cast film, or about 56 ft (17 m) for chrome or patterned film. Labor is the other main factor, because the long door panels take time to lay smoothly.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Xpower SV wraps by generation

Swipe sideways. Tap a card for the full description.

MG Xpower SV, first generation, factory photo
Factory color shown

2003–2005 Xpower SV coupe (first generation)

2003–2005coupe (2 doors)176.4 in (4,480 mm)

The first generation Xpower SV was built from 2003 to 2005 as a coupe only. Paint age on a car of these years can vary: panels may be original or repainted. A test spot comes before a full wrap to check how the film bonds to the painted surface.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Xpower SV

A partial wrap on an Xpower SV can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear wrap for the front end of the car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an MG Xpower SV: body, cut-outs and film

The MG Xpower SV vinyl wrap works around a single coupe body with two long doors. Each door is one large piece of film that needs careful laying to avoid wrinkles. The car measures 176.4 in (4,480 mm) long, which is a compact footprint for a sports car. That means most panels are within the width of standard 60-inch film.

Xpower SV wrap ideas start with the simple shape of the body. The two long side doors are the largest pieces, and each can be wrapped in one sheet if you plan the seams. The rear wing and front splitter benefit from inlays, and the door handles come off for a cleaner edge.

To know how much vinyl to wrap a Xpower SV, you use the figure for the only generation. A full wrap of the 2003–2005 coupe takes about 49 ft (15 m) of cast film. If you choose a chrome or patterned film, allow about 56 ft (17 m) for matching the direction.

Questions about wrapping an MG Xpower SV

How much vinyl does it take to wrap an MG Xpower SV?

It takes about 49 ft (15 m) of 60-inch (1.52 m) cast film to wrap an MG Xpower SV. This is the estimate for the 2003–2005 coupe body. For chrome or patterned film, plan for about 56 ft (17 m).

Can I wrap only the hood or the roof of a Xpower SV?

Yes, you can wrap only the hood or the roof of a Xpower SV. A partial wrap can cover the roof, hood, or mirror caps. You can also do a chrome delete on the window trim and badges.

Is a Xpower SV hard to wrap?

Yes, a Xpower SV is somewhat hard to wrap because of its two long side doors. Each door is one large piece of film that needs skill to apply without wrinkles. The 176.4 in (4,480 mm) length is not extreme, but the door size adds work.

How many generations of the Xpower SV does this page cover?

This page covers one generation of the Xpower SV. The car was produced from 2003 to 2005 as a coupe only.