Wraps by car

MG S9 PHEV wrap

The MG S9 PHEV wrap page covers this plug-in hybrid SUV in full, from its one generation to the amount of film a complete wrap takes. The catalog lists the first generation, built from 2025 to now. A full wrap of this newest body uses about 57 ft (17.5 m) of 60-inch (1.52 m) cast vinyl wrap, or about 70 ft (21.5 m) if you choose chrome or patterned film.

1generations17.5 mof film for a full wrap

MG S9 PHEV, first generation, factory photo
MG S9 PHEV, first generation. Factory color shown.

MG S9 PHEV wrap colors and ideas

  • S9 PHEV black wrap
  • S9 PHEV white wrap
  • S9 PHEV gray wrap
  • S9 PHEV silver wrap
  • S9 PHEV red wrap
  • S9 PHEV blue wrap
  • S9 PHEV green wrap
  • S9 PHEV yellow wrap
  • S9 PHEV orange wrap
  • S9 PHEV purple wrap
  • S9 PHEV pink wrap
  • S9 PHEV teal wrap
  • S9 PHEV brown wrap
  • S9 PHEV gold wrap
  • S9 PHEV chrome wrap
  • S9 PHEV color shift wrap
  • S9 PHEV carbon fiber wrap
  • S9 PHEV camo and patterned wrap

How much vinyl to wrap an MG S9 PHEV

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2025–nowSUV (5 doors)196.2 in (4,983 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

S9 PHEV wrap cost factors

The S9 PHEV wrap cost depends on the size of the car and the film you pick. A full wrap takes about 57 ft (17.5 m) of standard cast film, while chrome or patterned film needs about 70 ft (21.5 m), so the material amount changes the total. The large body at 196.2 in (4,983 mm) long and 70.0 in (1,778 mm) tall adds labor time compared to a smaller vehicle. Details like the panoramic glass roof and roof rails also affect how many hours the installer works.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.
  • A tall body (70.0 in (1,778 mm)): the roof is wrapped from a platform.

S9 PHEV wraps by generation

Swipe sideways. Tap a card for the full description.

MG S9 PHEV, first generation, factory photo
Factory color shown

2025–now S9 PHEV SUV (first generation)

2025–nowSUV (5 doors)196.2 in (4,983 mm)

The first generation MG S9 PHEV has a panoramic glass roof on every trim, and that roof is not wrapped. This means the roof area stays its dark glass color no matter what film color you choose for the rest of the car. The wrap film is cut to end at the roof rails, leaving the glass exposed. If you want a color change on the roof, the glass itself cannot be covered, so the dark panel remains a fixed part of the look.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

A tall body (70.0 in (1,778 mm)): the roof is wrapped from a platform.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on an S9 PHEV

An S9 PHEV partial wrap lets you cover only selected panels instead of the whole SUV. You can wrap the hood, mirror caps, or tailgate as separate pieces. A chrome delete covers the window trim and badges with black film, and paint protection film (PPF) is applied as a clear film on the front end. These smaller jobs use less film than a full wrap and focus on the areas most visible.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an MG S9 PHEV: body, cut-outs and film

An MG S9 PHEV vinyl wrap has to cover a large SUV body that is 196.2 in (4,983 mm) long, which means more film and more install time than a smaller car. The five-door SUV shape is straightforward, without a separate trunk lid to work around. Its height of 70.0 in (1,778 mm) puts the roof out of easy reach, so installers use a platform for that section. The wrap is planned around fixed points like the glass roof and roof rails that stay unwrapped or are removed first.

S9 PHEV wrap ideas need to account for several details on the body. The tailgate includes the rear glass, so the film stops at the edge of that glass. Every trim has a panoramic glass roof, which is not wrapped, and the film ends at the roof rails. Those roof rails come off before the roof is wrapped, or the film is cut along them. Parking sensors and cameras are cut around carefully, and the charge port door is wrapped as its own small piece.

To know how much vinyl to wrap an S9 PHEV, you compare the one generation in the catalog. The first generation, from 2025 to now, is the only body style, an SUV with five doors. Its length drives the film estimate: about 57 ft (17.5 m) for plain cast film. Since there is no older or newer body yet, the number stays the same for every S9 PHEV you wrap.

Questions about wrapping an MG S9 PHEV

How much vinyl does it take to wrap an MG S9 PHEV?

It takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film to wrap an MG S9 PHEV, or about 70 ft (21.5 m) for chrome or patterned film. This estimate is for the first generation body, the only one in the catalog. Planning for the full amount avoids running short on a car that is 196.2 in (4,983 mm) long.

Can the roof of an S9 PHEV be wrapped?

No, the roof of an S9 PHEV cannot be wrapped because every trim has a panoramic glass roof. The glass panel is not covered with film, so the film ends at the roof rails. The roof stays its original dark glass color as part of the design.

Can I wrap only the hood or the roof of an S9 PHEV?

Yes, you can wrap only the hood or the roof area of an S9 PHEV, but the roof means the film is applied around the panoramic glass roof, not over it. A partial wrap on this car can be the hood, mirror caps, or tailgate. The roof rails can be removed for a clean edge, or the film is cut along them.

Is an S9 PHEV hard to wrap?

Yes, an S9 PHEV is hard to wrap because of its size and several details that add work. The body is 196.2 in (4,983 mm) long and 70.0 in (1,778 mm) tall, so installers need a platform for the roof. Every trim has parking sensors and cameras that require cut-outs, and the roof rails must be removed or cut around. The panoramic glass roof also means the film edges are finished at the rails with care.