The MG ZS wrap cost depends on the size of the car, the film type, and how much labor the body needs. The second generation is 174.4 in (4,430 mm) long and takes about 61 ft (18.5 m) of film, while the first generation is 169.8 in (4,314 mm) long and takes about 57 ft (17.5 m). Chrome or patterned film adds about 10 percent more material, and some trims have a panoramic glass roof that is not wrapped, which reduces the roof area. Roof rails, parking sensors, and cameras all add cut-outs or removal time, so the labor changes with each trim.

2024–now MG ZS SUV (second generation)
The second-generation MG ZS from 2024 onward has some trims with a panoramic glass roof that is not wrapped. That means the roof stays dark whatever the color of the film, because glass cannot be covered with vinyl wrap. The film ends at the roof rails, and every trim has roof rails, so the installer either removes them or cuts the film along them. This is a key detail for owners who want a full color change on the roof.
A tailgate with the rear glass in it: the film ends at the edge of the glass.
Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
Some trims have a rear spoiler: it is wrapped as a piece of its own.
Every trim has parking sensors in the bumpers: the film is cut around each sensor.
Every trim has cameras in the body: the film is cut around each lens.
Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.
Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
