Wraps by car

MG 750 wrap

The MG 750 wrap page covers the first generation sedan produced from 2006 to 2016, the only generation in the catalog. A full vinyl wrap of this car takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film, or about 66 ft (20 m) for chrome or patterned film.

1generations16.5 mof film for a full wrap

MG 750, first generation, factory photo
MG 750, first generation. Factory color shown.

MG 750 wrap colors and ideas

  • MG 750 black wrap
  • MG 750 white wrap
  • MG 750 gray wrap
  • MG 750 silver wrap
  • MG 750 red wrap
  • MG 750 blue wrap
  • MG 750 green wrap
  • MG 750 yellow wrap
  • MG 750 orange wrap
  • MG 750 purple wrap
  • MG 750 pink wrap
  • MG 750 teal wrap
  • MG 750 brown wrap
  • MG 750 gold wrap
  • MG 750 chrome wrap
  • MG 750 color shift wrap
  • MG 750 carbon fiber wrap
  • MG 750 camo and patterned wrap

How much vinyl to wrap an MG 750

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2016sedan (4 doors)191.5 in (4,865 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

MG 750 wrap cost factors

MG 750 wrap cost depends on the film type, the condition of the paint, and the labor for the 191.5 in (4,865 mm) sedan body. The car takes about 54 ft (16.5 m) of cast film, so the film amount and the number of cut-outs around lights and trim affect the total. Cost also changes with the number of panels that must be removed and reinstalled, such as door handles and badges.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: sedan (4 doors).

MG 750 wraps by generation

Swipe sideways. Tap a card for the full description.

MG 750, first generation, factory photo
Factory color shown

2006–2016 MG 750 sedan (first generation)

2006–2016sedan (4 doors)191.5 in (4,865 mm)

The first generation MG 750 from 2006–2016 has paint age to consider before wrapping, as panels may be original or repainted. A test spot on an inconspicuous area shows whether the film will adhere well to the existing paint. If any paint is loose or oxidized, the wrap may lift or show texture, so the surface needs correction first.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on an MG 750

Partial wrap options for the MG 750 include the roof, hood, and mirror caps, or a chrome delete on the window trim and badges. Paint protection film (PPF) can be applied as a clear film on the front end to protect the bumper, hood, and fenders. A partial wrap is a way to change the look without covering the whole 191.5 in (4,865 mm) sedan.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an MG 750: body, cut-outs and film

An MG 750 vinyl wrap covers a four-door sedan body that is 191.5 in (4,865 mm) long. The sedan shape has a fixed roof and four doors, so film is applied to the hood, trunk, roof, fenders, doors, and bumpers as one continuous surface. The 191.5 in length means the installer works with long side panels that need careful alignment along the body line.

For MG 750 wrap ideas, consider that the door handles, badges, and antenna usually come off for a clean install, and the bumper and lights often need cut-outs. The window trim is a straight chrome piece that can be wrapped in place for a chrome delete, where bright trim is covered with black film. The front bumper has fog light openings that require relief cuts, and the grille surround is best removed for full coverage.

When you want to know how much vinyl to wrap an MG 750, the first generation figure is about 54 ft (16.5 m) of 60-inch film, with chrome or patterned film needing about 66 ft (20 m). The catalog has only this generation, so there are no changes between generations to account for. Counting film for this car means using the estimate for the 191.5 in sedan body and adding waste for the complex bumper shapes.

Questions about wrapping an MG 750

How much vinyl does it take to wrap an MG 750?

It takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast vinyl to wrap an MG 750, or about 66 ft (20 m) for chrome or patterned film. The estimate is for the first generation sedan produced from 2006 to 2016, and the installer may need extra for waste on the bumpers and rockers.

Can I wrap only the hood or the roof of an MG 750?

Yes, you can wrap only the hood or the roof of an MG 750, and mirror caps are also a common partial job. The shop offers partial wraps for the roof, hood, and mirror caps, along with chrome delete for the window trim and badges. A partial wrap on the roof or hood uses less film than the full 54 ft (16.5 m) for the whole car.

Is an MG 750 hard to wrap?

An MG 750 is moderately hard to wrap because of its 191.5 in (4,865 mm) length and the need to remove door handles, badges, and antenna for a clean finish. The front bumper has fog light openings and a grille surround that require extra time for cutting and tucking film. The sedan's long roof and doors also make it harder to handle large sheets of vinyl without creasing.

How many generations of the MG 750 does this page cover?

This page covers one generation of the MG 750, the first generation sedan from 2006 to 2016.