Wraps by car

MG 6 wrap

The MG 6 wrap page covers the first-generation MG 6 produced from 2010 to 2017. This mid-size car came as a hatchback and a sedan with four or five doors. A full vinyl wrap of the newest body takes about 57 ft (17.5 m) for the sedan to 61 ft (18.5 m) for the hatchback, using 60-inch (1.52 m) cast film.

1generations17.5 mof film for a full wrap

MG 6, first generation, factory photo
MG 6, first generation. Factory color shown.

MG 6 wrap colors and ideas

  • MG 6 black wrap
  • MG 6 white wrap
  • MG 6 gray wrap
  • MG 6 silver wrap
  • MG 6 red wrap
  • MG 6 blue wrap
  • MG 6 green wrap
  • MG 6 yellow wrap
  • MG 6 orange wrap
  • MG 6 purple wrap
  • MG 6 pink wrap
  • MG 6 teal wrap
  • MG 6 brown wrap
  • MG 6 gold wrap
  • MG 6 chrome wrap
  • MG 6 color shift wrap
  • MG 6 carbon fiber wrap
  • MG 6 camo and patterned wrap

How much vinyl to wrap an MG 6

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2010–2017hatchback, sedan (4 or 5 doors)183.2 in (4,653 mm)about 57 ft (17.5 m) for the sedan to 61 ft (18.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m)

MG 6 wrap cost factors

MG 6 wrap cost depends on the body style, the amount of film, and the condition of the paint. The sedan needs about 57 ft (17.5 m) and the hatchback about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. The installers' time changes with the number of doors and the complexity of the bumpers. Any paint correction or removal of old film adds to the total.

  • Film for a full wrap: about 57 ft (17.5 m) for the sedan to 61 ft (18.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).
  • Body: hatchback, sedan (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

MG 6 wraps by generation

Swipe sideways. Tap a card for the full description.

MG 6, first generation, factory photo
Factory color shown

2010–2017 MG 6 hatchback, sedan (first generation)

2010–2017hatchback, sedan (4 or 5 doors)183.2 in (4,653 mm)

The first-generation MG 6 was built from 2010 to 2017 as a hatchback or a sedan with four or five doors. The hatchback has a tailgate that includes the rear glass, so the film ends at the glass edge. The sedan has a separate trunk lid and rear window, which makes the panel plan simpler. Both body styles share the same length of 183.2 in (4,653 mm), so the main difference is the rear section.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 57 ft (17.5 m) for the sedan to 61 ft (18.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).

Roof, hood, chrome delete and PPF on an MG 6

A partial wrap on an MG 6 can cover the roof, hood, or mirror caps. An MG 6 chrome delete replaces the bright trim on the window surrounds and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an MG 6: body, cut-outs and film

The MG 6 vinyl wrap is shaped by the car's two body styles and its mid-size dimensions. The sedan measures 183.2 in (4,653 mm) long, while the hatchback shares the same length but has a different rear panel layout. A hatchback's tailgate often means a separate panel for the rear, which adds to the film amount. The four-door and five-door versions also change how much door film is needed.

MG 6 wrap ideas often start with the tailgate, which includes the rear glass and requires the film to end at the glass edge. The door handles, badges, and antenna are removed for a clean install. The front and rear bumpers need cut-outs around sensors and lights. The roof rails, if present, are also removed for better film adhesion.

How much vinyl to wrap an MG 6 depends on the generation and body style. The first generation, built from 2010 to 2017, came only as a hatchback or sedan, so the panel count is the same across those years. A full wrap of the sedan uses about 57 ft (17.5 m), and the hatchback takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film.

Questions about wrapping an MG 6

How much vinyl does it take to wrap an MG 6?

It takes about 57 ft (17.5 m) to 61 ft (18.5 m) of 60-inch (1.52 m) cast film to wrap an MG 6, depending on the body style. The sedan needs about 57 ft (17.5 m), while the hatchback needs about 61 ft (18.5 m).

Which MG 6 body takes more film?

The MG 6 hatchback takes more film than the sedan. The hatchback needs about 61 ft (18.5 m) of 60-inch (1.52 m) cast film, while the sedan needs about 57 ft (17.5 m). The tailgate with integrated glass adds a larger panel to cover.

Can I wrap only the hood or the roof of an MG 6?

Yes, you can wrap only the hood or the roof of an MG 6. A partial wrap on those panels is a smaller job that still changes the look. Mirror caps are another common partial wrap option.

Is an MG 6 hard to wrap?

An MG 6 is not the easiest car to wrap because of its tailgate with integrated glass. The film must end neatly at the edge of the glass, which requires precise trimming. The mid-size body also has long roof and side panels that need careful handling.