Wraps by car

MG 350 wrap

An MG 350 wrap covers the compact sedan built from 2010 to 2015, the only generation in the catalog. The car is a four-door sedan with a length of 178.0 in (4,521 mm). A full vinyl wrap of this body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. If the film is chrome or patterned, you need about 64 ft (19.5 m).

1generations17 mof film for a full wrap

MG 350, first generation, factory photo
MG 350, first generation. Factory color shown.

MG 350 wrap colors and ideas

  • MG 350 black wrap
  • MG 350 white wrap
  • MG 350 gray wrap
  • MG 350 silver wrap
  • MG 350 red wrap
  • MG 350 blue wrap
  • MG 350 green wrap
  • MG 350 yellow wrap
  • MG 350 orange wrap
  • MG 350 purple wrap
  • MG 350 pink wrap
  • MG 350 teal wrap
  • MG 350 brown wrap
  • MG 350 gold wrap
  • MG 350 chrome wrap
  • MG 350 color shift wrap
  • MG 350 carbon fiber wrap
  • MG 350 camo and patterned wrap

How much vinyl to wrap an MG 350

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2010–2015sedan (4 doors)178.0 in (4,521 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

MG 350 wrap cost factors

The MG 350 wrap cost depends on the film material, the condition of the paint, and the labor for a 178.0 in (4,521 mm) sedan. A full wrap uses about 56 ft (17 m) of film, so a cast film costs more than a calendar film. If you choose chrome or patterned film, the amount rises to about 64 ft (19.5 m). Extra work like removing trim or cutting around parking sensors can also add to the cost.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.

MG 350 wraps by generation

Swipe sideways. Tap a card for the full description.

MG 350, first generation, factory photo
Factory color shown

2010–2015 MG 350 sedan (first generation)

2010–2015sedan (4 doors)178.0 in (4,521 mm)

The MG 350 was made from 2010 to 2015 as a four-door sedan. Paint on a car of these years may be original or repainted, so a test spot comes before a full wrap. The length of 178.0 in (4,521 mm) means the film estimate stays the same for all cars of this generation. Some trims have a sunroof, so the roof film is cut around its opening.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on an MG 350

A partial wrap on an MG 350 can cover the roof, hood, or mirror caps. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film that goes on the front end. These jobs use less film than a full wrap but still need careful cutting around sensors and the sunroof if present.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an MG 350: body, cut-outs and film

The MG 350 vinyl wrap starts with a sedan body that has four doors and a length of 178.0 in (4,521 mm). This size means a full wrap uses about 56 ft (17 m) of 60-inch (1.52 m) cast film. The four doors add seams and edges that need careful trimming. The bumpers wrap around the front and rear, so you need extra material for stretching.

MG 350 wrap ideas begin with the roof, which may have a sunroof on some trims; the film is cut around its opening. Every trim has parking sensors in the bumpers, so the film must be cut around each sensor. The door handles, mirrors, and trim pieces come off for a cleaner install. You can also cover the chrome window trim with black film.

How much vinyl to wrap an MG 350 depends on the film type and any pattern. The first generation is the only body, so the estimate is the same for all years: about 56 ft (17 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires more, about 64 ft (19.5 m). When you count film, add a little extra for waste and mistakes.

Questions about wrapping an MG 350

How much vinyl does it take to wrap an MG 350?

It takes about 56 ft (17 m) of 60-inch (1.52 m) cast film to wrap an MG 350. If you use chrome or patterned film, you need about 64 ft (19.5 m). The car is a compact sedan with a length of 178.0 in (4,521 mm).

Can the roof of an MG 350 be wrapped?

Yes, the roof of an MG 350 can be wrapped. Some trims have a sunroof, so the film is cut around its opening. The roof is one of the easier panels because it is mostly flat.

Can I wrap only the hood or the roof of an MG 350?

Yes, you can wrap only the hood or the roof of an MG 350. A partial wrap can include the roof, hood, or mirror caps. Paint protection film is another option for the front end.

Is an MG 350 hard to wrap?

The MG 350 is not hard to wrap, but some details add work. Every trim has parking sensors in the bumpers, so the film must be cut around each sensor. Some trims have a sunroof, and the roof film is cut around its opening. The car is 178.0 in (4,521 mm) long, which is typical for a compact sedan.