Wraps by car

MG Metro wrap

The MG Metro wrap page covers the first generation of the MG Metro, produced from 1982 to 1990. The car is a subcompact hatchback with three doors. A full vinyl wrap of the newest body takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film, or about 51 ft (15.5 m) for chrome or patterned film.

1generations12.5 mof film for a full wrap

MG Metro, first generation, factory photo
MG Metro, first generation. Factory color shown.

MG Metro wrap colors and ideas

  • Metro black wrap
  • Metro white wrap
  • Metro gray wrap
  • Metro silver wrap
  • Metro red wrap
  • Metro blue wrap
  • Metro green wrap
  • Metro yellow wrap
  • Metro orange wrap
  • Metro purple wrap
  • Metro pink wrap
  • Metro teal wrap
  • Metro brown wrap
  • Metro gold wrap
  • Metro chrome wrap
  • Metro color shift wrap
  • Metro carbon fiber wrap
  • Metro camo and patterned wrap

How much vinyl to wrap an MG Metro

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1982–1990hatchback (3 doors)134.1 in (3,406 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

Metro wrap cost factors

Metro wrap cost depends on the film type, the condition of the paint, and the number of parts you wrap. A full wrap uses about 41 ft (12.5 m) of cast film, while chrome or patterned film requires about 51 ft (15.5 m). A partial wrap involves less film and fewer hours. The car's age means paint correction or extra prep work may be needed before wrapping.

  • Film for a full wrap: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Metro wraps by generation

Swipe sideways. Tap a card for the full description.

MG Metro, first generation, factory photo
Factory color shown

1982–1990 Metro hatchback (first generation)

1982–1990hatchback (3 doors)134.1 in (3,406 mm)

The first generation MG Metro was built from 1982 to 1990 as a three-door hatchback. Paint age on a car of these years can vary: panels may be original or repainted. A test spot comes before a full wrap to check paint adhesion. The body is 134.1 in (3,406 mm) long, so a full wrap takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Metro

A partial wrap on an MG Metro can cover the roof, hood, or mirror caps. A Metro chrome delete uses black film on the window trim and badges. Clear paint protection film (PPF) can be applied to the front end to guard against stone chips. These smaller jobs use less material and leave much of the original paint visible.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an MG Metro: body, cut-outs and film

The MG Metro vinyl wrap fits a small subcompact hatchback with three doors. The car is 134.1 in (3,406 mm) long, so a full wrap uses less film than larger cars. Because the body has only three doors, the side panels are large and uninterrupted. A standard cast film wrap of the whole car uses about 41 ft (12.5 m) of 60-inch (1.52 m) film.

Metro wrap ideas start with the two long side doors, each of which is one large piece of film. The tailgate includes the rear glass, so the film ends at the edge of the glass rather than wrapping around it. The door handles, mirrors, and window trim need careful trimming and cut-outs. For a chrome delete on the Metro, the bright trim around the windows and badges is covered with black film.

How much vinyl to wrap a Metro depends on which generation you have, but this page covers only the first generation from 1982 to 1990. There are no other generations in the catalog, so the film estimate does not change across years. The hatchback body style is the only one offered, so every Metro of this generation needs the same amount of film for a full wrap.

Questions about wrapping an MG Metro

How much vinyl does it take to wrap an MG Metro?

Yes, a full wrap of an MG Metro takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the total is about 51 ft (15.5 m). This estimate is for the only body style: the three-door hatchback from 1982 to 1990.

Can I wrap only the hood or the roof of a Metro?

Yes, you can wrap only the hood or the roof of a Metro. A partial wrap on the MG Metro commonly covers the roof, hood, or mirror caps. These small sections use less film and take less time than a full wrap.

Is a Metro hard to wrap?

Yes, a Metro has a few points that add work. The tailgate includes the rear glass, so the film must end at the edge of the glass. The two long side doors are each one large piece of film, which needs careful handling to avoid wrinkles. The small size of the car helps with material costs, but the body lines of the 1980s design require patience.

How many generations of the Metro does this page cover?

This page covers one generation of the MG Metro. The first generation was produced from 1982 to 1990 as a three-door hatchback. There are no other generations listed in the catalog.