Wraps by car

MG TD Midget wrap

The MG TD Midget wrap page covers the 1950–1953 first generation convertible in full. It lists the vinyl wrap amounts a complete color change takes. A full wrap of this body needs about 36 ft (11 m) of 60-inch (1.52 m) cast film.

1generations11 mof film for a full wrap

MG TD Midget, first generation, factory photo
MG TD Midget, first generation. Factory color shown.

MG TD Midget wrap colors and ideas

  • TD Midget black wrap
  • TD Midget white wrap
  • TD Midget gray wrap
  • TD Midget silver wrap
  • TD Midget red wrap
  • TD Midget blue wrap
  • TD Midget green wrap
  • TD Midget yellow wrap
  • TD Midget orange wrap
  • TD Midget purple wrap
  • TD Midget pink wrap
  • TD Midget teal wrap
  • TD Midget brown wrap
  • TD Midget gold wrap
  • TD Midget chrome wrap
  • TD Midget color shift wrap
  • TD Midget carbon fiber wrap
  • TD Midget camo and patterned wrap

How much vinyl to wrap an MG TD Midget

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1950–1953convertible (2 doors)145.0 in (3,683 mm)about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m)

TD Midget wrap cost factors

TD Midget wrap cost depends mainly on the film choice and the amount of panel work. A chrome or patterned film raises the needed amount to about 44 ft (13.5 m) of 60-inch (1.52 m) material. The separate fenders and bolt-on parts add labor compared with a modern monocoque body.

  • Film for a full wrap: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

TD Midget wraps by generation

Swipe sideways. Tap a card for the full description.

MG TD Midget, first generation, factory photo
Factory color shown

1950–1953 TD Midget convertible (first generation)

1950–1953convertible (2 doors)145.0 in (3,683 mm)

The open top of the MG TD Midget stays unwrapped because it is a fabric convertible. The vinyl film ends where the fabric begins, at the body line below the side curtains and rear deck. A folding hard top, when fitted, is wrapped as its own separate panels and not as part of the main body.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m).

Roof, hood, chrome delete and PPF on a TD Midget

A partial wrap on a TD Midget can cover the hood, mirror caps, or rear deck in a different color. The TD Midget chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is also an option as clear film on the front end of this classic.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an MG TD Midget: body, cut-outs and film

The MG TD Midget vinyl wrap follows the small convertible body of this two-door classic. Its 145.0 in (3,683 mm) length keeps the main panels short and the film use low. The separate fenders and running boards are wrapped as individual pieces rather than one continuous sheet.

TD Midget wrap ideas begin with the parts that need cut-outs or come off the car. The bolt-on front and rear fenders unbolt for cleaner edges and film tucked behind them. The grille shell, hood sides with louvers, and the windshield frame all need relief cuts or removal for a neat finish.

Anyone counting how much vinyl to wrap a TD Midget works with one body style and one generation. The 1950–1953 convertible is the only shape, so the 36 ft (11 m) figure holds for every car in the catalog. There is no earlier or later body to change the estimate.

Questions about wrapping an MG TD Midget

How much vinyl does it take to wrap an MG TD Midget?

Yes, a full wrap of an MG TD Midget takes about 36 ft (11 m) of 60-inch (1.52 m) cast film. That estimate covers the whole convertible body of the 1950–1953 first generation. If you choose chrome or patterned film, the amount rises to about 44 ft (13.5 m).

Is the top of a TD Midget wrapped?

No, the top of a TD Midget is not wrapped. The fabric convertible top stays uncovered, and the film ends where the fabric begins. Only a folding hard top, if the car has one, is wrapped as its own panels.

Can I wrap only the hood or the roof of a TD Midget?

Yes, you can wrap only the hood or the rear deck of a TD Midget as a partial job. The mirror caps are another common small area for a color change or protective film. These partial wraps use far less film than the full 36 ft (11 m) body wrap.

Is a TD Midget hard to wrap?

Yes, a TD Midget is harder to wrap than a modern car because of its separate fenders and small panels. The 145.0 in (3,683 mm) length means tight curves around the grille and rear deck need careful stretching. The bolt-on fenders must come off or be cut around for clean edges, and the fabric top limits where film can end.