Wraps by car

TVR 280 wrap

This page covers the TVR 280 wrap, a vinyl wrap job for the 1980–1986 two-door sports car. The TVR 280 has one generation, and a full wrap of the newest body takes about 38 ft (11.5 m) to 44 ft (13.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film can take up to about 51 ft (15.5 m).

1generations11.5 mof film for a full wrap

TVR 280, first generation, factory photo
TVR 280, first generation. Factory color shown.

TVR 280 wrap colors and ideas

  • TVR 280 black wrap
  • TVR 280 white wrap
  • TVR 280 gray wrap
  • TVR 280 silver wrap
  • TVR 280 red wrap
  • TVR 280 blue wrap
  • TVR 280 green wrap
  • TVR 280 yellow wrap
  • TVR 280 orange wrap
  • TVR 280 purple wrap
  • TVR 280 pink wrap
  • TVR 280 teal wrap
  • TVR 280 brown wrap
  • TVR 280 gold wrap
  • TVR 280 chrome wrap
  • TVR 280 color shift wrap
  • TVR 280 carbon fiber wrap
  • TVR 280 camo and patterned wrap

How much vinyl to wrap a TVR 280

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1980–1986convertible, coupe (2 doors)160.0 in (4,064 mm) to 161.0 in (4,090 mm)about 38 ft (11.5 m) for the convertible to 44 ft (13.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 51 ft (15.5 m)

TVR 280 wrap cost factors

TVR 280 wrap cost depends on the body style, film choice, and how much trim is removed. A coupe uses up to 44 ft (13.5 m) of cast film, while a convertible uses as little as 38 ft (11.5 m). Chrome or patterned film can push the amount to 51 ft (15.5 m), and the two long side doors take large single pieces.

  • Film for a full wrap: about 38 ft (11.5 m) for the convertible to 44 ft (13.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 51 ft (15.5 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

TVR 280 wraps by generation

Swipe sideways. Tap a card for the full description.

TVR 280, first generation, factory photo
Factory color shown

1980–1986 TVR 280 convertible, coupe (first generation)

1980–1986convertible, coupe (2 doors)160.0 in (4,064 mm) to 161.0 in (4,090 mm)

On the first generation TVR 280, the open top is left unwrapped if it is fabric, and the film ends where the top begins. A folding hard top would be wrapped as panels of its own, but this car is not listed with one. The two long side doors are wrapped as single large pieces.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 38 ft (11.5 m) for the convertible to 44 ft (13.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a TVR 280

A partial wrap on a TVR 280 can cover the roof, hood, or mirror caps. TVR 280 chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a TVR 280: body, cut-outs and film

A TVR 280 vinyl wrap has to handle both body styles: the convertible and the coupe, both with two doors. The car is 160.0 in (4,064 mm) to 161.0 in (4,090 mm) long, which keeps film use in the moderate range for a sports car. The convertible needs less film than the coupe because the fabric top is not wrapped.

For TVR 280 wrap ideas, the two long side doors are each one large piece of film. On the convertible, the fabric top is not wrapped and the film ends where the top begins. Any trim around the doors or windows can be wrapped separately or left exposed.

If you are counting how much vinyl to wrap a TVR 280, the generation matters less than the body style. This model had only one generation from 1980 to 1986, so the film estimate stays the same across production years. The convertible and coupe differ by about 6 ft (1.8 m) of film.

Questions about wrapping a TVR 280

How much vinyl does it take to wrap a TVR 280?

It takes about 38 ft (11.5 m) to 44 ft (13.5 m) of 60-inch (1.52 m) cast film to wrap a TVR 280, depending on body style. A coupe needs up to 44 ft (13.5 m), while a convertible needs as little as 38 ft (11.5 m). Chrome or patterned film can take up to about 51 ft (15.5 m).

Is the top of a TVR 280 wrapped?

No, the top of a TVR 280 convertible is not wrapped when it is fabric. The film ends where the fabric top begins. A folding hard top would be wrapped as panels, but this model does not list one.

Which TVR 280 body takes more film?

The coupe takes more film than the convertible for a TVR 280. The coupe needs up to 44 ft (13.5 m), while the convertible needs as little as 38 ft (11.5 m). The difference is about 6 ft (1.8 m).

Can I wrap only the hood or the roof of a TVR 280?

Yes, you can wrap only the hood or the roof of a TVR 280 as a partial wrap. Mirror caps are another small job. Clear paint protection film can be applied to just the front end.