Wraps by car

TVR 350 wrap

The TVR 350 wrap page covers the single-generation TVR 350 sports car produced from 1983 to 1989. A full vinyl wrap of the newest body takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film for the convertible. The coupe body needs more film, up to 44 ft (13.5 m). Chrome or patterned film on either body can use up to about 49 ft (15 m).

1generations13.5 mof film for a full wrap

TVR 350, first generation, factory photo
TVR 350, first generation. Factory color shown.

TVR 350 wrap colors and ideas

  • TVR 350 black wrap
  • TVR 350 white wrap
  • TVR 350 gray wrap
  • TVR 350 silver wrap
  • TVR 350 red wrap
  • TVR 350 blue wrap
  • TVR 350 green wrap
  • TVR 350 yellow wrap
  • TVR 350 orange wrap
  • TVR 350 purple wrap
  • TVR 350 pink wrap
  • TVR 350 teal wrap
  • TVR 350 brown wrap
  • TVR 350 gold wrap
  • TVR 350 chrome wrap
  • TVR 350 color shift wrap
  • TVR 350 carbon fiber wrap
  • TVR 350 camo and patterned wrap

How much vinyl to wrap a TVR 350

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1983–1989convertible, coupe (2 doors)158.0 in (4,013 mm)about 38 ft (11.5 m) for the convertible to 44 ft (13.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 49 ft (15 m)

TVR 350 wrap cost factors

TVR 350 wrap cost is driven by the body style and the film chosen. The convertible takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film, while the coupe needs up to 44 ft (13.5 m). Chrome or patterned film increases material use to about 49 ft (15 m). The number of cut-outs is low, so labor time is moderate for a sports car.

  • Film for a full wrap: about 38 ft (11.5 m) for the convertible to 44 ft (13.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 49 ft (15 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

TVR 350 wraps by generation

Swipe sideways. Tap a card for the full description.

TVR 350, first generation, factory photo
Factory color shown

1983–1989 TVR 350 convertible, coupe (first generation)

1983–1989convertible, coupe (2 doors)158.0 in (4,013 mm)

The open top of the TVR 350 convertible is left unwrapped when the roof is fabric. The film ends where the fabric begins, so the wrap lines must be trimmed cleanly at the edge. A folding hard top is wrapped as panels of its own, each panel cut and installed separately. The coupe body has no open top and its fixed roof is wrapped like the rest of the body.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 38 ft (11.5 m) for the convertible to 44 ft (13.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 49 ft (15 m).

Roof, hood, chrome delete and PPF on a TVR 350

A partial wrap on a TVR 350 can cover the roof, hood, or mirror caps as separate jobs. A TVR 350 chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These options let you change the look or protect the paint without wrapping the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a TVR 350: body, cut-outs and film

A TVR 350 vinyl wrap is shaped by the car's compact 158.0 in (4,013 mm) length and two body styles. The convertible uses about 38 ft (11.5 m) of 60-inch (1.52 m) cast film because the fabric top is not wrapped. The coupe requires up to 44 ft (13.5 m) since its fixed roof adds surface area. Both bodies have two long side doors, and each door is wrapped as one large piece of film.

TVR 350 wrap ideas begin with careful handling of the fabric top on the convertible. The film ends where the top begins, and a folding hard top is wrapped as separate panels of its own. The two long side doors must be covered as single large pieces to avoid visible seams. There are no complex cut-outs needed for the body itself beyond standard trimming at edges and trim.

How much vinyl to wrap a TVR 350 depends on the single generation of this sports car. The first generation spans 1983 to 1989 and includes convertible and coupe styles. The convertible needs about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. The coupe uses up to 44 ft (13.5 m), and chrome or patterned film adds about 5 to 6 ft (1.5 to 1.8 m).

Questions about wrapping a TVR 350

How much vinyl does it take to wrap a TVR 350?

How much vinyl does it take to wrap a TVR 350? A full wrap takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film for the convertible. The coupe needs up to 44 ft (13.5 m) of the same film. Chrome or patterned film can require up to about 49 ft (15 m).

Is the top of a TVR 350 wrapped?

No, the fabric top of a TVR 350 convertible is not wrapped. The film ends where the fabric begins. A folding hard top is wrapped as panels of its own, so each panel is covered separately.

Which TVR 350 body takes more film?

The TVR 350 coupe takes more film than the convertible. The coupe needs up to 44 ft (13.5 m) of cast film, while the convertible uses about 38 ft (11.5 m). The fixed roof of the coupe adds surface area to cover.

Can I wrap only the hood or the roof of a TVR 350?

Yes, you can wrap only the hood or the roof of a TVR 350. A partial wrap can cover the roof, hood, or mirror caps. You can also choose a chrome delete for the window trim and badges or clear paint protection film for the front end.