Wraps by car

TVR 390 wrap

The TVR 390 wrap page covers the sole first-generation convertible produced from 1984 to 1989. The car body is 158.0 in (4,013 mm) long, and a full wrap takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast vinyl.

1generations11.5 mof film for a full wrap

TVR 390, first generation, factory photo
TVR 390, first generation. Factory color shown.

TVR 390 wrap colors and ideas

  • TVR 390 black wrap
  • TVR 390 white wrap
  • TVR 390 gray wrap
  • TVR 390 silver wrap
  • TVR 390 red wrap
  • TVR 390 blue wrap
  • TVR 390 green wrap
  • TVR 390 yellow wrap
  • TVR 390 orange wrap
  • TVR 390 purple wrap
  • TVR 390 pink wrap
  • TVR 390 teal wrap
  • TVR 390 brown wrap
  • TVR 390 gold wrap
  • TVR 390 chrome wrap
  • TVR 390 color shift wrap
  • TVR 390 carbon fiber wrap
  • TVR 390 camo and patterned wrap

How much vinyl to wrap a TVR 390

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1984–1989convertible (2 doors)158.0 in (4,013 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)

TVR 390 wrap cost factors

The TVR 390 wrap cost depends on the car's length and the amount of film, about 38 ft (11.5 m). A chrome or patterned film raises the material need to about 48 ft (14.5 m). The convertible top is not wrapped, which keeps the job to the painted body panels.

  • Film for a full wrap: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

TVR 390 wraps by generation

Swipe sideways. Tap a card for the full description.

TVR 390, first generation, factory photo
Factory color shown

1984–1989 TVR 390 convertible (first generation)

1984–1989convertible (2 doors)158.0 in (4,013 mm)

The first generation TVR 390 is a convertible, and its fabric top is not wrapped. The film ends where the fabric begins, and the installer trims it neatly along that edge. A folding hard top would be wrapped as its own panels, but this car has a soft top.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on a TVR 390

A partial wrap on a TVR 390 can cover the hood, mirror caps, or rear deck. For a chrome delete, the window trim and badges are covered with black film. Paint protection film (PPF) can be applied as a clear layer on the front end.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a TVR 390: body, cut-outs and film

A TVR 390 vinyl wrap has to fit a compact sports car with a convertible body and two doors. The film ends where the fabric top begins, so the wrap covers all painted panels below the beltline. The short length means less film than a typical sedan, but the curves need careful stretching.

TVR 390 wrap ideas include handling the fabric top correctly and working around the doors. The convertible body means the film stops at the edge of the top, and the installer trims it cleanly along that line. The mirrors and badges come off for a smooth result.

How much vinyl to wrap a TVR 390 depends on the single generation sold from 1984 to 1989. Because there is only one body, the estimate does not change between years. The convertible shape uses about 38 ft (11.5 m) of 60-inch (1.52 m) cast film.

Questions about wrapping a TVR 390

How much vinyl does it take to wrap a TVR 390?

A TVR 390 takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast vinyl for a full wrap. That figure is for the first-generation convertible body produced from 1984 to 1989. If you choose chrome or patterned film, plan on about 48 ft (14.5 m).

Is the top of a TVR 390 wrapped?

No, the top of a TVR 390 is not wrapped. The convertible body has a fabric top, and the film ends where that top begins. Only the painted panels below the top edge receive vinyl.

Can I wrap only the hood or the roof of a TVR 390?

Yes, you can wrap only the hood or the roof of a TVR 390. A partial wrap often covers the hood, mirror caps, or rear deck. These smaller jobs use less film and focus on specific panels.

Is a TVR 390 hard to wrap?

A TVR 390 is moderately hard to wrap because of its fabric top and compact size. The film must be trimmed cleanly where the fabric begins, which adds precision work. The car's short length and curves also require careful stretching of the vinyl.