Wraps by car

TVR Taimar wrap

This page covers the TVR Taimar wrap, a vinyl wrap for the one-generation sports car built from 1976 to 1979. The catalog includes the coupe body with two long side doors. A full wrap of this body takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. Using chrome or patterned film needs about 52 ft (16 m).

1generations13.5 mof film for a full wrap

TVR Taimar, first generation, factory photo
TVR Taimar, first generation. Factory color shown.

TVR Taimar wrap colors and ideas

  • Taimar black wrap
  • Taimar white wrap
  • Taimar gray wrap
  • Taimar silver wrap
  • Taimar red wrap
  • Taimar blue wrap
  • Taimar green wrap
  • Taimar yellow wrap
  • Taimar orange wrap
  • Taimar purple wrap
  • Taimar pink wrap
  • Taimar teal wrap
  • Taimar brown wrap
  • Taimar gold wrap
  • Taimar chrome wrap
  • Taimar color shift wrap
  • Taimar carbon fiber wrap
  • Taimar camo and patterned wrap

How much vinyl to wrap a TVR Taimar

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1976–1979coupe (2 doors)161.5 in (4,103 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Taimar wrap cost factors

Taimar wrap cost depends on the film area of the compact coupe, about 44 ft (13.5 m) for a standard color change. The choice of chrome or patterned film raises the film needed to about 52 ft (16 m). Paint condition also matters: on a car from 1976 to 1979, old or repainted panels may need extra prep. Labor time increases with the two long side doors.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Taimar wraps by generation

Swipe sideways. Tap a card for the full description.

TVR Taimar, first generation, factory photo
Factory color shown

1976–1979 Taimar coupe (first generation)

1976–1979coupe (2 doors)161.5 in (4,103 mm)

The first generation TVR Taimar was produced from 1976 to 1979 as a two-door coupe. Paint age on a car of these years means panels may be original or repainted, and a test spot comes before a full wrap. The wrap film needs to bond to the paint, so a shop checks adhesion on a small area first. The body length is 161.5 in (4,103 mm).

Two long side doors: each door is one large piece of film.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Taimar

Partial wrap on a Taimar can cover the roof, hood, or mirror caps. Taimar chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end. These smaller jobs use less material than a full body wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a TVR Taimar: body, cut-outs and film

The TVR Taimar vinyl wrap works around a compact coupe body that is 161.5 in (4,103 mm) long. The two-door style means fewer door seams than a four-door car, but the doors are long panels. A full wrap covers the entire exterior in one large film application. The size keeps the film count moderate for a classic sports car.

Taimar wrap ideas start with installing film over the two long side doors. Each door is one large piece of film, so a clean install needs careful alignment. The shop may remove door handles and badges to cut and tuck the film. No unusual cut-outs are reported for this body, but trim edges need attention.

To know how much vinyl to wrap a Taimar, check the one body style: the coupe from 1976 to 1979. The catalog lists only one generation, so film needs stay the same for every year. A color change wrap uses about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 52 ft (16 m) because of pattern matching.

Questions about wrapping a TVR Taimar

How much vinyl does it take to wrap a TVR Taimar?

It takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film to wrap a TVR Taimar. Chrome or patterned film needs about 52 ft (16 m) for the same body. These figures cover the coupe from 1976 to 1979.

Can I wrap only the hood or the roof of a Taimar?

Yes, you can wrap only the hood or the roof of a Taimar. Partial wrap jobs also include mirror caps. A chrome delete covers window trim and badges. These options use less film than a full wrap.

Is a Taimar hard to wrap?

Yes, a Taimar is hard to wrap because of the two long side doors. Each door is one large piece of film, so handling and alignment take extra care. The compact body length of 161.5 in (4,103 mm) helps, but old paint may need a test spot first.

How many generations of the Taimar does this page cover?

This page covers one generation of the Taimar, built from 1976 to 1979.