Wraps by car

TVR Tasmin wrap

This page covers the TVR Tasmin wrap, from the first-generation 1980–1987 convertible and coupe to the film a full vinyl wrap takes. The Tasmin uses about 38 ft (11.5 m) of 60-inch cast film for the convertible and about 44 ft (13.5 m) for the coupe. A chrome or patterned film can take up to about 49 ft (15 m).

1generations11.5 mof film for a full wrap

TVR Tasmin, first generation, factory photo
TVR Tasmin, first generation. Factory color shown.

TVR Tasmin wrap colors and ideas

  • Tasmin black wrap
  • Tasmin white wrap
  • Tasmin gray wrap
  • Tasmin silver wrap
  • Tasmin red wrap
  • Tasmin blue wrap
  • Tasmin green wrap
  • Tasmin yellow wrap
  • Tasmin orange wrap
  • Tasmin purple wrap
  • Tasmin pink wrap
  • Tasmin teal wrap
  • Tasmin brown wrap
  • Tasmin gold wrap
  • Tasmin chrome wrap
  • Tasmin color shift wrap
  • Tasmin carbon fiber wrap
  • Tasmin camo and patterned wrap

How much vinyl to wrap a TVR Tasmin

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1980–1987convertible, coupe (2 doors)158.0 in (4,013 mm)about 38 ft (11.5 m) for the convertible to 44 ft (13.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 49 ft (15 m)

Tasmin wrap cost factors

Tasmin wrap cost depends on the amount of film, the body style, and the work around the top and doors. The coupe needs about 44 ft (13.5 m) of 60-inch cast film, and a chrome or patterned design can take up to about 49 ft (15 m). The fabric top on a convertible is not wrapped, so the film ends where the top begins, and each long side door is one large piece of film.

  • Film for a full wrap: about 38 ft (11.5 m) for the convertible to 44 ft (13.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 49 ft (15 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

Tasmin wraps by generation

Swipe sideways. Tap a card for the full description.

TVR Tasmin, first generation, factory photo
Factory color shown

1980–1987 Tasmin convertible, coupe (first generation)

1980–1987convertible, coupe (2 doors)158.0 in (4,013 mm)

The first-generation TVR Tasmin has a fabric top that is not wrapped, and the film ends where the top begins. If the car has a folding hard top, that top is wrapped as panels of its own. The two long side doors each take one large piece of film rather than separate small sections.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 38 ft (11.5 m) for the convertible to 44 ft (13.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 49 ft (15 m).

Roof, hood, chrome delete and PPF on a Tasmin

A Tasmin chrome delete covers the window trim and badges with black film, and a partial wrap can cover the roof, hood, or mirror caps. Paint protection film (PPF) is a clear film option for the front end on this car. These smaller jobs use less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a TVR Tasmin: body, cut-outs and film

A TVR Tasmin vinyl wrap follows the two body styles: a convertible and a two-door coupe, both 158.0 in (4,013 mm) long. The long doors each take one large piece of film, so installers cut two clean panels for the sides. The body has no complex rear door seams, which keeps the wrap layout straightforward.

Tasmin wrap ideas start with how the film meets the fabric top on a convertible: the top is not wrapped, and the film ends where it begins. A folding hard top is wrapped as its own panels if fitted. The two long side doors are each covered with one large piece of film, so seams stay away from the middle of the door.

How much vinyl to wrap a Tasmin depends on the body style you have, because the first generation ran from 1980 to 1987 with only convertible and coupe versions. A convertible needs about 38 ft (11.5 m) of 60-inch cast film, while the coupe needs about 44 ft (13.5 m). Installers add extra film for chrome or patterned designs, up to about 49 ft (15 m).

Questions about wrapping a TVR Tasmin

How much vinyl does it take to wrap a TVR Tasmin?

A TVR Tasmin takes about 38 ft (11.5 m) of 60-inch cast film for the convertible and about 44 ft (13.5 m) for the coupe. For chrome or patterned film, you may need up to about 49 ft (15 m) in total.

Is the top of a Tasmin wrapped?

No, the fabric top of a Tasmin is not wrapped, and the film ends where the top begins. If the car has a folding hard top, that top is wrapped as panels of its own.

Which Tasmin body takes more film?

The coupe takes more film than the convertible: about 44 ft (13.5 m) compared to about 38 ft (11.5 m) of 60-inch cast film.

Can I wrap only the hood or the roof of a Tasmin?

Yes, you can wrap only the hood or the roof of a Tasmin as a partial wrap, and mirror caps are also an option. For a chrome delete, the window trim and badges are covered with black film.