Wraps by car

TVR Chimaera wrap

The TVR Chimaera wrap page covers the 1992–2003 convertible sports car in its single generation. A full vinyl wrap of this two-door body takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. The data here helps owners plan material for a standard color change wrap.

1generations11.5 mof film for a full wrap

TVR Chimaera, first generation, factory photo
TVR Chimaera, first generation. Factory color shown.

TVR Chimaera wrap colors and ideas

  • Chimaera black wrap
  • Chimaera white wrap
  • Chimaera gray wrap
  • Chimaera silver wrap
  • Chimaera red wrap
  • Chimaera blue wrap
  • Chimaera green wrap
  • Chimaera yellow wrap
  • Chimaera orange wrap
  • Chimaera purple wrap
  • Chimaera pink wrap
  • Chimaera teal wrap
  • Chimaera brown wrap
  • Chimaera gold wrap
  • Chimaera chrome wrap
  • Chimaera color shift wrap
  • Chimaera carbon fiber wrap
  • Chimaera camo and patterned wrap

How much vinyl to wrap a TVR Chimaera

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1992–2003convertible (2 doors)156.1 in (3,965 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)

Chimaera wrap cost factors

Chimaera wrap cost depends mainly on the size and the film choice. The car needs about 38 ft (11.5 m) of cast film, and a chrome or patterned option raises that to about 48 ft (14.5 m). The number of cut-outs and how much the installer removes also add labor.

  • Film for a full wrap: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Chimaera wraps by generation

Swipe sideways. Tap a card for the full description.

TVR Chimaera, first generation, factory photo
Factory color shown

1992–2003 Chimaera convertible (first generation)

1992–2003convertible (2 doors)156.1 in (3,965 mm)

The first generation TVR Chimaera has a convertible top that is not wrapped. The vinyl ends where the fabric top begins, so the installer trims the film along the top's edge and seals it carefully. If a folding hard top is fitted, it is wrapped as separate panels of its own.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on a Chimaera

Partial wrap jobs on a Chimaera include the hood, mirror caps and rear deck. Chrome delete covers the window trim and badges, which are small areas that change the look quickly. Paint protection film (PPF) can be applied as clear film on the front end to guard against stone chips.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a TVR Chimaera: body, cut-outs and film

A TVR Chimaera vinyl wrap has to follow the car's 156.1 in (3,965 mm) convertible body. The fabric top is not wrapped, so the film ends where the top begins and the installer works around that edge. The two-door body keeps panel sizes moderate for a sports car, though the curved rear deck takes care in stretching.

Chimaera wrap ideas often start with the parts that need cut-outs or come off. Door handles and badges come off for a clean install, and the front bumper needs relief cuts around the lights. The fabric top and its seals stay in place, so the film is trimmed neatly at that line.

For how much vinyl to wrap a Chimaera, the figure stays the same across the 1992–2003 run. The body dimensions did not change, so every year uses about 38 ft (11.5 m) of 60-inch film. Chrome or patterned film needs more material for matching, typically about 48 ft (14.5 m).

Questions about wrapping a TVR Chimaera

How much vinyl does it take to wrap a TVR Chimaera?

A full TVR Chimaera wrap takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast vinyl. That figure is for the standard body with a color change wrap. Chrome or patterned film needs about 48 ft (14.5 m) because the pattern direction has to match.

Is the top of a Chimaera wrapped?

No, the top of a Chimaera is not wrapped. The fabric top stays as it is, and the vinyl ends where the top begins. The installer trims the film at that edge and works the seals so the wrap stays down.

Can I wrap only the hood or the roof of a Chimaera?

Yes, you can wrap only the hood or the roof of a Chimaera. A partial wrap can cover the hood, mirror caps or rear deck, while the rest of the paint stays original. The film is cut to the panel edges for a clean finish.

Is a Chimaera hard to wrap?

A Chimaera is not the easiest car to wrap because of its curves and the convertible top. The body is 156.1 in (3,965 mm) long, and the rear deck needs extra stretching to avoid wrinkles. The fabric top also means the installer must cut and seal the film along that edge, which adds time.