Wraps by car

TVR 400 wrap

A TVR 400 wrap covers the entire first generation sports car, produced from 1989 to 1993. The car's one generation in the catalog has a convertible body with two doors. A full wrap of the newest body takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. A vinyl wrap changes the color and finish without paint.

1generations11.5 mof film for a full wrap

TVR 400, first generation, factory photo
TVR 400, first generation. Factory color shown.

TVR 400 wrap colors and ideas

  • TVR 400 black wrap
  • TVR 400 white wrap
  • TVR 400 gray wrap
  • TVR 400 silver wrap
  • TVR 400 red wrap
  • TVR 400 blue wrap
  • TVR 400 green wrap
  • TVR 400 yellow wrap
  • TVR 400 orange wrap
  • TVR 400 purple wrap
  • TVR 400 pink wrap
  • TVR 400 teal wrap
  • TVR 400 brown wrap
  • TVR 400 gold wrap
  • TVR 400 chrome wrap
  • TVR 400 color shift wrap
  • TVR 400 carbon fiber wrap
  • TVR 400 camo and patterned wrap

How much vinyl to wrap a TVR 400

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1989–1993convertible (2 doors)158.1 in (4,015 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)

TVR 400 wrap cost factors

The TVR 400 wrap cost depends on the film chosen and the amount of labor involved. The car needs about 38 ft (11.5 m) of 60-inch (1.52 m) cast film for a full wrap. A chrome or patterned film increases the film amount to about 48 ft (14.5 m) and adds time for alignment. A partial wrap costs less because it uses less film and fewer hours.

  • Film for a full wrap: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

TVR 400 wraps by generation

Swipe sideways. Tap a card for the full description.

TVR 400, first generation, factory photo
Factory color shown

1989–1993 TVR 400 convertible (first generation)

1989–1993convertible (2 doors)158.1 in (4,015 mm)

In the first generation, the open top of the TVR 400 is not wrapped. The fabric top is left as it is and the film ends where it begins. If the car has a folding hard top instead, each panel of that top is wrapped separately. This keeps the film from lifting at the edges when the top is raised or lowered.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on a TVR 400

Instead of a full wrap, you can choose a partial wrap on the TVR 400. A hood, mirror caps, and rear deck can be covered in the same film for a two-tone look. A chrome delete replaces bright window trim and badges with black film. Paint protection film is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a TVR 400: body, cut-outs and film

The TVR 400 vinyl wrap is shaped by its convertible body style and its length of 158.1 in (4,015 mm). The fabric top is not wrapped, so the film ends where it begins. The two doors and compact size keep panel count low for a sports car. You still need to plan seams around the rear deck and front fenders.

TVR 400 wrap ideas start with what comes off the car for a clean install. The door handles, mirrors, and badges are removed before the film goes on. A convertible body means the fabric top is not wrapped and the film ends where it begins. If the car has a folding hard top, that is wrapped as panels of its own.

How much vinyl to wrap a TVR 400 depends on the film type you choose. For a standard color change wrap, budget about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. If you plan chrome or patterned film, allow about 48 ft (14.5 m) because of waste matching. The single generation keeps the estimate consistent for this car.

Questions about wrapping a TVR 400

How much vinyl does it take to wrap a TVR 400?

A TVR 400 takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film for a full wrap. That is the estimate for the newest body with a standard color change film. If you choose chrome or patterned film, plan for about 48 ft (14.5 m) to account for extra waste.

Is the top of a TVR 400 wrapped?

No, the fabric top of a TVR 400 is not wrapped. The film ends where the top begins because wrapping flexible fabric would not hold up. If the car has a folding hard top, that is wrapped as panels of its own.

Can I wrap only the hood or the roof of a TVR 400?

Yes, you can wrap only the hood or the roof of a TVR 400. A partial wrap commonly covers the hood, mirror caps, and rear deck together. The roof alone is possible only if the car has a folding hard top. A paint protection film on the front end is another way to protect the hood without a full wrap.

Is a TVR 400 hard to wrap?

Yes, a TVR 400 is somewhat hard to wrap because of its convertible body and classic age. The fabric top is not wrapped and the film ends where it begins, which requires precise cutting. The car is only 158.1 in (4,015 mm) long, so panels are small but curvy. A folding hard top, if present, must be wrapped as separate panels, adding time.