Wraps by car

Acura ILX wrap

The Acura ILX wrap is a vinyl wrap job for a mid-size sedan that has been on sale since 2012. Acura has cataloged one generation of the ILX, with restyling in 2015 and 2018. A full wrap of the newest body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film.

1generations16 mof film for a full wrap

Acura ILX, first generation, factory photo
Acura ILX, first generation. Factory color shown.

Acura ILX wrap colors and ideas

  • Acura ILX black wrap
  • Acura ILX white wrap
  • Acura ILX gray wrap
  • Acura ILX silver wrap
  • Acura ILX red wrap
  • Acura ILX blue wrap
  • Acura ILX green wrap
  • Acura ILX yellow wrap
  • Acura ILX orange wrap
  • Acura ILX purple wrap
  • Acura ILX pink wrap
  • Acura ILX teal wrap
  • Acura ILX brown wrap
  • Acura ILX gold wrap
  • Acura ILX chrome wrap
  • Acura ILX color shift wrap
  • Acura ILX carbon fiber wrap
  • Acura ILX camo and patterned wrap

How much vinyl to wrap an Acura ILX

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–nowsedan (4 doors)179.1 in (4,550 mm) to 182.2 in (4,628 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Acura ILX wrap cost factors

The Acura ILX wrap cost depends on the size of the body and how much of the car you cover. A full wrap uses about 52 ft (16 m) of film, while a partial wrap on the roof or hood uses less material. The 2015 and 2018 restyling gave the car larger bumpers, which take more labor to wrap than the earlier smaller bumpers. Chrome delete or paint protection film also change the amount of film and work.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).
  • Restyled in 2015, 2018: bumpers and lights differ between the versions, and so do the film cuts.

Acura ILX wraps by generation

Swipe sideways. Tap a card for the full description.

Acura ILX, first generation, factory photo
Factory color shown

2012–now Acura ILX sedan (first generation)

2012–nowsedan (4 doors)179.1 in (4,550 mm) to 182.2 in (4,628 mm)

The first generation Acura ILX ran from 2012 onward and was restyled in 2015 and 2018. The restyling changed the bumpers and lights, so film cut for one version does not fit the other. If you have a 2012–2014 car, order film templates for that early style; if you have a 2015–2017 car, the mid-cycle bumpers are different again. The 2018 and later cars have the latest bumper shape.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on an Acura ILX

You can wrap only parts of the Acura ILX, such as the roof, hood or mirror caps. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. A partial wrap is a good way to change the look without using a full 52 ft (16 m) of film.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Acura ILX: body, cut-outs and film

The Acura ILX vinyl wrap covers a four-door sedan body with a length from 179.1 in (4,550 mm) to 182.2 in (4,628 mm). The body has few sharp corners, so the film lays down in large pieces. The roof, hood, trunk and doors are all straightforward flat panels. You will need about 52 ft (16 m) of film for a full color change wrap.

When planning Acura ILX wrap ideas, the door handles, mirrors, badges and antenna all need cut-outs or removal. The front and rear bumpers are larger after the 2015 and 2018 restyling, so they need more time to wrap cleanly. The side mirrors come off easily and are wrapped off the car for a neater edge. You may also remove the door handles for a seamless film look.

When you figure how much vinyl to wrap an Acura ILX, the answer changes with the version you own. The 2015 and 2018 restyling changed the bumpers and lights, so film cut for one version does not fit the other. The length grew from 179.1 in (4,550 mm) to 182.2 in (4,628 mm), which adds a small amount of film. The estimate of about 52 ft (16 m) is for the newest body from 2018 onward.

Questions about wrapping an Acura ILX

How much vinyl does it take to wrap an Acura ILX?

About 52 ft (16 m) of 60-inch (1.52 m) cast film is enough to wrap a full Acura ILX. That figure assumes the newest body from 2018 onward, with the larger bumpers. If you choose chrome or patterned film, you will need about 64 ft (19.5 m) because the pattern must be matched.

Which years of the Acura ILX take the same film cuts?

The Acura ILX was restyled in 2015 and 2018, so the same film cuts fit the years 2012–2014, 2015–2017 and 2018 onward. The bumpers and lights changed at each restyle, so a kit cut for a 2015 car will not fit a 2013 or a 2019 car.

Can I wrap only the hood or the roof of an Acura ILX?

Yes, you can wrap only the hood or the roof of an Acura ILX. A partial wrap on those panels uses much less film than a full wrap, and the job can be done in a shorter time. Many owners also wrap the mirror caps or do a chrome delete on the window trim and badges.

Is an Acura ILX hard to wrap?

An Acura ILX is not especially hard to wrap, but the larger bumpers on 2015 and later cars add work. The door handles, mirrors and badges need cut-outs or removal. The sedan body has mostly flat panels, so a careful installer can get a clean result with the standard amount of film.