Wraps by car

Acura Legend wrap

The Acura Legend wrap is a vinyl wrap project for a full-size coupe or sedan from two generations. The second generation ran from 1990 to 1996 and the first from 1986 to 1990. A full wrap of the newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) film for the coupe and 54 ft (16.5 m) for the sedan.

2generations15.5 mof film for a full wrap

Acura Legend, second generation, factory photo
Acura Legend, second generation. Factory color shown.

Acura Legend wrap colors and ideas

  • Legend black wrap
  • Legend white wrap
  • Legend gray wrap
  • Legend silver wrap
  • Legend red wrap
  • Legend blue wrap
  • Legend green wrap
  • Legend yellow wrap
  • Legend orange wrap
  • Legend purple wrap
  • Legend pink wrap
  • Legend teal wrap
  • Legend brown wrap
  • Legend gold wrap
  • Legend chrome wrap
  • Legend color shift wrap
  • Legend carbon fiber wrap
  • Legend camo and patterned wrap

How much vinyl to wrap an Acura Legend

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1990–1996coupe, sedan (2 or 4 doors)192.5 in (4,890 mm) to 194.9 in (4,950 mm)about 51 ft (15.5 m) for the coupe to 54 ft (16.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m)
1986–1990coupe, sedan (2 or 4 doors)188.0 in (4,775 mm) to 190.6 in (4,841 mm)about 49 ft (15 m) for the coupe to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)

Legend wrap cost factors

Legend wrap cost depends on the body style, film type and condition of the paint. A sedan needs more film than a coupe, and a patterned or chrome film uses up to about 67 ft (20.5 m) on a second generation. Paint correction before wrapping adds work on a car of these years. Removing trim and badges also changes the labour time.

  • Film for a full wrap: about 51 ft (15.5 m) for the coupe to 54 ft (16.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).
  • Body: coupe, sedan (2 or 4 doors).

Legend wraps by generation

Swipe sideways. Tap a card for the full description.

Acura Legend, second generation, factory photo
Factory color shown

1990–1996 Legend coupe, sedan (second generation)

1990–1996coupe, sedan (2 or 4 doors)192.5 in (4,890 mm) to 194.9 in (4,950 mm)

The second generation Acura Legend came as a coupe or sedan with two or four doors. The style decides the panel plan and the film amount, with the coupe needing about 51 ft (15.5 m) and the sedan 54 ft (16.5 m) of 60-inch (1.52 m) cast film. The sedan has four door skins and a larger roof, so it takes more material than the coupe.

Film: about 51 ft (15.5 m) for the coupe to 54 ft (16.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).

Acura Legend, first generation, factory photo
Factory color shown

1986–1990 Legend coupe, sedan (first generation)

1986–1990coupe, sedan (2 or 4 doors)188.0 in (4,775 mm) to 190.6 in (4,841 mm)

The first generation Acura Legend came as a coupe or sedan with two or four doors. Paint age matters on a car of these years because panels may be original or repainted. A test spot comes before a full wrap to check adhesion on the old paint. The coupe needs about 49 ft (15 m) and the sedan 52 ft (16 m) of 60-inch (1.52 m) film.

Film: about 49 ft (15 m) for the coupe to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Legend

A partial wrap on a Legend covers the roof, hood or mirror caps instead of the whole car. A legend chrome delete covers the window trim and badges with black film for a different look. Paint protection film (PPF) is a clear film on the front end to guard against stone chips. These jobs use less film and take less time than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Acura Legend: body, cut-outs and film

An Acura Legend vinyl wrap covers large panels on a full-size body. The second generation measures 192.5 in (4,890 mm) to 194.9 in (4,950 mm) long, and the first generation 188.0 in (4,775 mm) to 190.6 in (4,841 mm). The coupe and sedan both need the roof, hood, trunk, doors, fenders and bumpers wrapped. The size means a wrap uses most of a 60-inch (1.52 m) roll with few offcuts.

Legend wrap ideas start with the parts that need cut-outs or come off. Door handles, mirrors, badges, antenna and trim are removed before the film goes on. The bumpers and rocker panels need relief cuts because of their curves. A chrome delete covers the window trim and badges with black film.

How much vinyl to wrap a Legend depends on the generation and body style. The second generation needs about 51 ft (15.5 m) for the coupe and 54 ft (16.5 m) for the sedan. The first generation needs about 49 ft (15 m) for the coupe and 52 ft (16 m) for the sedan. Chrome or patterned film takes up to about 67 ft (20.5 m) on a second generation and 66 ft (20 m) on a first.

Questions about wrapping an Acura Legend

How much vinyl does it take to wrap an Acura Legend?

It takes about 51 ft (15.5 m) to 54 ft (16.5 m) of 60-inch (1.52 m) vinyl to wrap an Acura Legend, depending on body style. The coupe needs about 51 ft (15.5 m) and the sedan about 54 ft (16.5 m).

Which Legend body takes more film?

The sedan takes more film than the coupe on an Acura Legend. A second generation sedan needs about 54 ft (16.5 m) and a coupe about 51 ft (15.5 m). A first generation sedan needs about 52 ft (16 m) and a coupe about 49 ft (15 m).

Can I wrap only the hood or the roof of a Legend?

Yes, you can wrap only the hood or the roof of a Legend. A partial wrap covers the roof, hood or mirror caps instead of the whole car. This uses less film and is a smaller job than a full wrap.

Is a Legend hard to wrap?

A Legend is not especially hard to wrap, but its size and details add work. The full-size body has large panels that need a second pair of hands. Door handles, mirrors, badges and trim come off first, and the bumpers need relief cuts.