Wraps by car

Acura RDX wrap

The Acura RDX wrap page covers three generations of this SUV, from 2006 to the present. A vinyl wrap on the newest body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film for the same body takes about 72 ft (22 m).

3generations19.5 mof film for a full wrap

Acura RDX, third generation, factory photo
Acura RDX, third generation. Factory color shown.

Acura RDX wrap colors and ideas

  • Acura RDX black wrap
  • Acura RDX white wrap
  • Acura RDX gray wrap
  • Acura RDX silver wrap
  • Acura RDX red wrap
  • Acura RDX blue wrap
  • Acura RDX green wrap
  • Acura RDX yellow wrap
  • Acura RDX orange wrap
  • Acura RDX purple wrap
  • Acura RDX pink wrap
  • Acura RDX teal wrap
  • Acura RDX brown wrap
  • Acura RDX gold wrap
  • Acura RDX chrome wrap
  • Acura RDX color shift wrap
  • Acura RDX carbon fiber wrap
  • Acura RDX camo and patterned wrap

How much vinyl to wrap an Acura RDX

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2018–nowSUV (5 doors)186.8 in (4,745 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)
2012–2018SUV (5 doors)184.4 in (4,684 mm) to 184.4 in (4,685 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
2006–2012SUV (5 doors)180.7 in (4,590 mm) to 182.5 in (4,635 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Acura RDX wrap cost factors

Acura RDX wrap cost depends on the generation, the film type, and the bodywork. The newest body is 186.8 in (4,745 mm) long, which is larger than the first generation at 180.7 in (4,590 mm). The second generation has roof rails and a sunroof on every trim, so labor is higher. Chrome or patterned film requires about 72 ft (22 m), which raises material cost.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2021, 2024: bumpers and lights differ between the versions, and so do the film cuts.

Acura RDX wraps by generation

Swipe sideways. Tap a card for the full description.

Acura RDX, third generation, factory photo
Factory color shown

2018–now Acura RDX SUV (third generation)

2018–nowSUV (5 doors)186.8 in (4,745 mm)

The third generation Acura RDX was restyled in 2021 and 2024, so bumpers and lights changed. Film cut for one version does not fit the other without changes. The tailgate still has the rear glass in it, so the film ends at the edge of the glass. Overall length remains 186.8 in (4,745 mm).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Acura RDX, second generation, factory photo
Factory color shown

2012–2018 Acura RDX SUV (second generation)

2012–2018SUV (5 doors)184.4 in (4,684 mm) to 184.4 in (4,685 mm)

The second generation Acura RDX has roof rails on every trim. They come off before the roof is wrapped, or the film is cut along them. Every trim also has a sunroof, so the roof film is cut around its opening. The body is 184.4 in (4,684 mm) to 184.4 in (4,685 mm) long.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a sunroof: the roof film is cut around its opening.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Acura RDX, first generation, factory photo
Factory color shown

2006–2012 Acura RDX SUV (first generation)

2006–2012SUV (5 doors)180.7 in (4,590 mm) to 182.5 in (4,635 mm)

The first generation Acura RDX runs from 2006 to 2012, with a restyling in 2009. Paint age matters on a car of these years, because panels may be original or repainted. A test spot comes before a full wrap to check how the film adheres. The wrap film is about 62 ft (19 m) for the base color.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on an Acura RDX

A partial wrap on an Acura RDX covers the roof, hood, or mirror caps. Acura RDX chrome delete covers the window trim and badges with black film. Paint protection film (PPF) goes on the front end as a clear film. These jobs use less material than a full wrap and focus on specific areas.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Acura RDX: body, cut-outs and film

An Acura RDX vinyl wrap covers five doors and a tailgate with the rear glass in it. The film ends at the edge of the glass, which keeps the tailgate line clean. The newest body is 186.8 in (4,745 mm) long, so a competent installer needs two people for the roof. The first generation is slightly shorter, at 180.7 in (4,590 mm) to 182.5 in (4,635 mm).

Acura RDX wrap ideas start with the parts that need cut-outs or come off. On the second generation every trim has a sunroof, so the roof film is cut around its opening. Every trim has roof rails that come off before the roof is wrapped, or the film is cut along them. Parking sensors, cameras, and fog lamps also need cut-outs in the film.

How much vinyl to wrap an Acura RDX changes between generations. The third generation needs about 64 ft (19.5 m) of film, while the first and second generations take about 62 ft (19 m). The second generation adds work because of the sunroof and roof rails on every trim. For chrome or patterned film, add about 8 ft (2.5 m) to the base figure.

Questions about wrapping an Acura RDX

How much vinyl does it take to wrap an Acura RDX?

An Acura RDX takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film for a full wrap on the newest body. Chrome or patterned film takes about 72 ft (22 m). These figures are estimates for a standard color change wrap without extra bodywork.

Which years of the Acura RDX take the same film cuts?

The Acura RDX has three generations, and the film cuts change at each restyling. The first generation from 2006 to 2012 was restyled in 2009, so early and late cars differ. The second generation from 2012 to 2018 was restyled in 2015. The third generation from 2018 onward was restyled in 2021 and 2024, so each version has unique bumper and light shapes.

Can I wrap only the hood or the roof of an Acura RDX?

Yes, you can wrap only the hood or the roof of an Acura RDX. A partial wrap covers the roof, hood, or mirror caps. Chrome delete covers the window trim and badges. Paint protection film is also available for the front end only.

Is an Acura RDX hard to wrap?

An Acura RDX is moderately hard to wrap because of its size and body details. Every tailgate has the rear glass in it, so the film ends at the edge of the glass. The second generation adds a sunroof and roof rails on every trim, which require cut-outs or removal. Parking sensors, cameras, and fog lamps also need careful trimming.