Wraps by car

Acura Integra wrap

This page covers the Acura Integra wrap across four generations. It includes the newest liftback, which needs about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for a full vinyl wrap. The older bodies take slightly less film, from about 48 ft (14.5 m) to 51 ft (15.5 m). Chrome or patterned film adds roughly 15 percent to those amounts.

4generations16.5 mof film for a full wrap

Acura Integra, fourth generation, factory photo
Acura Integra, fourth generation. Factory color shown.

Acura Integra wrap colors and ideas

  • Integra black wrap
  • Integra white wrap
  • Integra gray wrap
  • Integra silver wrap
  • Integra red wrap
  • Integra blue wrap
  • Integra green wrap
  • Integra yellow wrap
  • Integra orange wrap
  • Integra purple wrap
  • Integra pink wrap
  • Integra teal wrap
  • Integra brown wrap
  • Integra gold wrap
  • Integra chrome wrap
  • Integra color shift wrap
  • Integra carbon fiber wrap
  • Integra camo and patterned wrap

How much vinyl to wrap an Acura Integra

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowliftback (5 doors)185.8 in (4,719 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
1993–2001coupe, sedan (2 or 4 doors)172.4 in (4,380 mm) to 178.1 in (4,525 mm)about 48 ft (14.5 m) for the coupe to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m)
1989–1993coupe, sedan (2 or 4 doors)172.9 in (4,392 mm) to 176.6 in (4,485 mm)about 48 ft (14.5 m) for the coupe to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m)
1985–1990hatchback (3 or 5 doors)168.7 in (4,285 mm) to 171.5 in (4,355 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Integra wrap cost factors

An Integra wrap cost reflects the car's size, panel count, and chosen film. The current liftback is longer and has more doors than the earlier coupes, so it needs more material and more labor. Chrome or patterned film for the liftback takes about 69 ft (21 m), compared with 54 ft (16.5 m) for standard cast film. Removing parts like mirrors and badges also adds to the final cost.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: liftback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2025: bumpers and lights differ between the versions, and so do the film cuts.

Integra wraps by generation

Swipe sideways. Tap a card for the full description.

Acura Integra, fourth generation, factory photo
Factory color shown

2022–now Integra liftback (fourth generation)

2022–nowliftback (5 doors)185.8 in (4,719 mm)

The fourth-generation Acura Integra was restyled in 2025. Bumpers and lights changed, so film cut for one version does not fit the other. The tailgate keeps its glass-integrated design, which means the vinyl stops at the glass edge. A full wrap of this body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Acura Integra, third generation, factory photo
Factory color shown

1993–2001 Integra coupe, sedan (third generation)

1993–2001coupe, sedan (2 or 4 doors)172.4 in (4,380 mm) to 178.1 in (4,525 mm)

The third-generation Acura Integra came as a coupe or a sedan. The style decides the panel plan and the film amount: the coupe needs about 48 ft (14.5 m) of 60-inch (1.52 m) film, and the sedan about 51 ft (15.5 m). Both bodies have two or four doors, which changes the number of door skins to wrap. Chrome or patterned film raises the total to about 62 ft (19 m).

Film: about 48 ft (14.5 m) for the coupe to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).

Acura Integra, second generation, factory photo
Factory color shown

1989–1993 Integra coupe, sedan (second generation)

1989–1993coupe, sedan (2 or 4 doors)172.9 in (4,392 mm) to 176.6 in (4,485 mm)

On a second-generation Acura Integra, paint age is the first thing to check. These cars are from 1989 to 1993, and panels may be original or repainted. A test spot on each panel shows whether the vinyl will lift old paint when removed. The film amount matches the third generation: about 48 ft (14.5 m) for the coupe and 51 ft (15.5 m) for the sedan.

Film: about 48 ft (14.5 m) for the coupe to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).

Acura Integra, first generation, factory photo
Factory color shown

1985–1990 Integra hatchback (first generation)

1985–1990hatchback (3 or 5 doors)168.7 in (4,285 mm) to 171.5 in (4,355 mm)

The first-generation Acura Integra body covers the 1985–1990 hatchback. Its years overlap with the newer body from 1989 to 1990, so the owner of a car from those years checks which body it is. The hatchback comes with three or five doors, and a tailgate with the rear glass in it. A full wrap uses about 49 ft (15 m) of 60-inch (1.52 m) cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on an Integra

A partial wrap on an Acura Integra can cover the roof, hood, or mirror caps. An Integra chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These jobs use less material and can be planned for any generation.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Acura Integra: body, cut-outs and film

An Acura Integra vinyl wrap is planned around the body style and size. The current liftback is 185.8 in (4,719 mm) long and has five doors, so the tailgate and roof demand long, single pieces of film. The third-generation coupe and sedan run from 172.4 in (4,380 mm) to 178.1 in (4,525 mm), while the first-generation hatchback measures between 168.7 in (4,285 mm) and 171.5 in (4,355 mm). These differences decide how the panels are split and how much film is ordered.

Integra wrap ideas often focus on the bumpers, mirrors, and badges. The current liftback and the first-generation hatchback have a tailgate with the rear glass in it, so the film ends at the edge of the glass. Door handles and antenna bases need cut-outs, and the door mirrors come off for a clean edge. Removing badges before wrapping avoids ridges in the vinyl.

How much vinyl to wrap an Integra depends on the generation and body style. The newest liftback requires about 54 ft (16.5 m) of 60-inch (1.52 m) cast film, while the third-generation coupe needs about 48 ft (14.5 m) and the sedan about 51 ft (15.5 m). The first-generation hatchback falls in the middle at about 49 ft (15 m). The second-generation coupe and sedan match the third-generation figures.

Questions about wrapping an Acura Integra

How much vinyl does it take to wrap an Acura Integra?

About 54 ft (16.5 m) of 60-inch (1.52 m) cast film is needed to wrap the newest Acura Integra liftback. That figure covers the full exterior with a standard solid color. Chrome or patterned film requires about 69 ft (21 m) because the pattern must be matched across panels.

Which years of the Integra take the same film cuts?

The 2022–2024 Acura Integra uses one set of film cuts, and the 2025 and later restyled version uses another. The third-generation cars from 1993–2001 share cuts between the coupe and sedan within those years. The first-generation and second-generation bodies each have their own patterns.

Can I wrap only the hood or the roof of an Integra?

Yes, you can wrap only the hood or the roof of an Integra. A partial wrap often includes the roof, hood, or mirror caps, and it works on any generation. The material needed is a fraction of the full wrap, so it is a smaller job for a single panel or two.

Is an Integra hard to wrap?

An Acura Integra is not especially hard to wrap, but some points add work. The current liftback and the first-generation hatchback have a tailgate with the rear glass in it, so the film ends at the glass edge. The car is compact, so large panels like the hood and roof are manageable for one installer.