Wraps by car

Acura RL wrap

The Acura RL wrap guide covers both generations of the full-size sedan, from 1995 to 2012. A vinyl wrap on the newest body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. The first generation is a little smaller and uses about 56 ft (17 m) of the same film. This page gives film amounts, body details, and wrap options for the Acura RL.

2generations18.5 mof film for a full wrap

Acura RL, second generation, factory photo
Acura RL, second generation. Factory color shown.

Acura RL wrap colors and ideas

  • Acura RL black wrap
  • Acura RL white wrap
  • Acura RL gray wrap
  • Acura RL silver wrap
  • Acura RL red wrap
  • Acura RL blue wrap
  • Acura RL green wrap
  • Acura RL yellow wrap
  • Acura RL orange wrap
  • Acura RL purple wrap
  • Acura RL pink wrap
  • Acura RL teal wrap
  • Acura RL brown wrap
  • Acura RL gold wrap
  • Acura RL chrome wrap
  • Acura RL color shift wrap
  • Acura RL carbon fiber wrap
  • Acura RL camo and patterned wrap

How much vinyl to wrap an Acura RL

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2004–2012sedan (4 doors)193.6 in (4,917 mm) to 195.8 in (4,973 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
1995–2004sedan (4 doors)196.7 in (4,995 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Acura RL wrap cost factors

The Acura RL wrap cost depends on the size of the car, the film type, and the amount of prep work. A full wrap of this full-size sedan takes about 61 ft (18.5 m) of film for the second generation or 56 ft (17 m) for the first. Chrome or patterned film adds about 9 to 14 ft (2.5 to 4 m) to the total. The condition of the paint also matters, because older panels may need more cleaning and correction before the film goes on.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: sedan (4 doors).
  • Restyled in 2008: bumpers and lights differ between the versions, and so do the film cuts.

Acura RL wraps by generation

Swipe sideways. Tap a card for the full description.

Acura RL, second generation, factory photo
Factory color shown

2004–2012 Acura RL sedan (second generation)

2004–2012sedan (4 doors)193.6 in (4,917 mm) to 195.8 in (4,973 mm)

The second-generation Acura RL was built from 2004 to 2012, with a restyling in 2008. The 2008 update changed the bumpers and lights, so film cut for one version does not fit the other. The length ranges from 193.6 in (4,917 mm) to 195.8 in (4,973 mm) depending on the version. A full wrap of this generation needs about 61 ft (18.5 m) of cast film.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Acura RL, first generation, factory photo
Factory color shown

1995–2004 Acura RL sedan (first generation)

1995–2004sedan (4 doors)196.7 in (4,995 mm)

The first-generation Acura RL was produced from 1995 to 2004, with a restyling in 1998. Paint age is a key factor on a car of these years, as panels may be original or repainted. A test spot on the paint before a full wrap shows whether the film will stick well. This generation is 196.7 in (4,995 mm) long and uses about 56 ft (17 m) of film for a full wrap.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on an Acura RL

A partial wrap on an Acura RL can cover the roof, hood, or mirror caps. An Acura RL chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film that can be applied to the front end of the car. These smaller jobs use less film and take less time than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Acura RL: body, cut-outs and film

An Acura RL vinyl wrap starts with the size of this full-size sedan, which is 193.6 in (4,917 mm) to 196.7 in (4,995 mm) long. Both generations are four-door sedans, so the roof, hood, trunk, and all four doors need film. The large panels use most of the 61 ft (18.5 m) for the second generation or 56 ft (17 m) for the first. A wrap on this car is a full-day job because of the long roof and deep bumpers.

Acura RL wrap ideas include wrapping the roof, hood, or mirror caps as smaller jobs. The window trim and badges can be covered with black film for a chrome delete. On the RL, the bumpers have many curves and the grille is detailed, so those areas need extra time and relief cuts. The door handles and emblems come off for a clean edge, and the trim around the windows must be tucked carefully.

How much vinyl to wrap an Acura RL depends on the generation and the film type. The second generation from 2004 to 2012 uses about 61 ft (18.5 m) of standard cast film. The first generation from 1995 to 2004 uses about 56 ft (17 m) of the same film. If you choose chrome or patterned film, plan for about 70 ft (21.5 m) on the newer body and 69 ft (21 m) on the older one.

Questions about wrapping an Acura RL

How much vinyl does it take to wrap an Acura RL?

A full wrap of an Acura RL takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film for the second generation. The first generation uses about 56 ft (17 m) of the same width film. Chrome or patterned film adds about 9 to 14 ft (2.5 to 4 m) to those amounts. The exact amount depends on the body version and how the installer cuts the film.

Which years of the Acura RL take the same film cuts?

The Acura RL had a second-generation body from 2004 to 2012 and a first-generation body from 1995 to 2004. Film cuts for the second generation fit all years, but the 2008 restyling changed the bumpers and lights, so those parts need different cuts for 2004–2007 and 2008–2012. The first generation was restyled in 1998, so the front and rear ends differ between 1995–1998 and 1998–2004. The roof, doors, and quarter panels are the same within each generation.

Can I wrap only the hood or the roof of an Acura RL?

Yes, you can wrap only the hood or the roof of an Acura RL. A partial wrap can also cover the mirror caps. These jobs use less film than a full wrap and are a good way to change the look of the car without covering every panel.

Is an Acura RL hard to wrap?

The Acura RL is not the hardest car to wrap, but its size and details add work. The car is 193.6 in (4,917 mm) to 196.7 in (4,995 mm) long, so the roof and quarter panels are large. The bumpers have deep curves that need relief cuts and careful stretching. The grille and window trim also need extra time to tuck the film cleanly.