Wraps by car

Acura SLX wrap

The Acura SLX wrap page covers one generation of this mid-size SUV, produced from 1995 to 1999. A full vinyl wrap of the newest body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. Chrome and patterned films increase the estimate to about 79 ft (24 m) because of additional trimming.

1generations19 mof film for a full wrap

Acura SLX, first generation, factory photo
Acura SLX, first generation. Factory color shown.

Acura SLX wrap colors and ideas

  • Acura SLX black wrap
  • Acura SLX white wrap
  • Acura SLX gray wrap
  • Acura SLX silver wrap
  • Acura SLX red wrap
  • Acura SLX blue wrap
  • Acura SLX green wrap
  • Acura SLX yellow wrap
  • Acura SLX orange wrap
  • Acura SLX purple wrap
  • Acura SLX pink wrap
  • Acura SLX teal wrap
  • Acura SLX brown wrap
  • Acura SLX gold wrap
  • Acura SLX chrome wrap
  • Acura SLX color shift wrap
  • Acura SLX carbon fiber wrap
  • Acura SLX camo and patterned wrap

How much vinyl to wrap an Acura SLX

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1995–1999SUV (5 doors)186.6 in (4,740 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)

Acura SLX wrap cost factors

The Acura SLX wrap cost depends on the film type, the shop's labor rate, and the condition of the paint. With only one generation, the body size of 186.6 in (4,740 mm) length and 72.2 in (1,835 mm) height affects labor time. Chrome or patterned film adds material waste, so the film cost is higher.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (72.2 in (1,835 mm)): the roof is wrapped from a platform.

Acura SLX wraps by generation

Swipe sideways. Tap a card for the full description.

Acura SLX, first generation, factory photo
Factory color shown

1995–1999 Acura SLX SUV (first generation)

1995–1999SUV (5 doors)186.6 in (4,740 mm)

The first generation Acura SLX is a tall SUV with a roof that requires a platform to wrap safely. This height adds time to the installation compared with lower vehicles. A full wrap of this body takes about 62 ft (19 m) of standard cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (72.2 in (1,835 mm)): the roof is wrapped from a platform.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Roof, hood, chrome delete and PPF on an Acura SLX

An Acura SLX chrome delete covers the window trim and badges with black film for a monochrome look. A partial wrap can cover just the roof, hood, or mirror caps to change the appearance without wrapping the whole SUV. Paint protection film (PPF) is also an option: clear film on the front end guards against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Acura SLX: body, cut-outs and film

The Acura SLX vinyl wrap must cover a single SUV body style with five doors, 186.6 in (4,740 mm) long. This size puts it in the mid-size class, so a full wrap needs more film than a small hatchback. Installers work in sections to keep seams hidden along the tall, flat sides.

Acura SLX wrap ideas start with the tailgate, where the rear glass is set into the door itself. The film ends at the edge of the glass, so the installer trims precisely around the window. The roof is also wrapped, but the body height of 72.2 in (1,835 mm) means using a platform.

How much vinyl to wrap an Acura SLX depends on the film you choose. A standard color change wrap needs about 62 ft (19 m) of 60-inch (1.52 m) cast film. If you pick chrome or patterned film, plan for about 79 ft (24 m) because of waste from matching patterns.

Questions about wrapping an Acura SLX

How much vinyl does it take to wrap an Acura SLX?

It takes about 62 ft (19 m) of 60-inch (1.52 m) cast film to wrap an Acura SLX. This estimate applies to the newest body, a five-door SUV produced from 1995 to 1999. If you choose chrome or patterned film, the figure rises to about 79 ft (24 m).

Can I wrap only the hood or the roof of an Acura SLX?

Yes, you can wrap only the hood or the roof of an Acura SLX. A partial wrap of the roof, hood, or mirror caps is a smaller job that still changes the look. For the roof, the installer works from a platform because the body is 72.2 in (1,835 mm) tall.

Is an Acura SLX hard to wrap?

An Acura SLX is not hard to wrap, but it has a tall body and a large tailgate with the rear glass set into it. The roof requires a platform, and the film must end at the edge of the glass on the tailgate. These details add time, but a skilled installer handles them without trouble.

How many generations of the Acura SLX does this page cover?

This page covers one generation of the Acura SLX, produced from 1995 to 1999. The vehicle was offered in a single SUV body style with five doors.