Wraps by car

Acura TLX wrap

The Acura TLX wrap page covers both generations of the mid-size Acura TLX sedan, from 2014 to the present. A full wrap of the newest body takes about 56 ft (17 m) of 60-inch (1.52 m) cast vinyl wrap, or about 69 ft (21 m) for chrome or patterned film. The guide explains how the car's size and features affect the wrapping process and what film each generation needs.

2generations17 mof film for a full wrap

Acura TLX, second generation, factory photo
Acura TLX, second generation. Factory color shown.

Acura TLX wrap colors and ideas

  • Acura TLX black wrap
  • Acura TLX white wrap
  • Acura TLX gray wrap
  • Acura TLX silver wrap
  • Acura TLX red wrap
  • Acura TLX blue wrap
  • Acura TLX green wrap
  • Acura TLX yellow wrap
  • Acura TLX orange wrap
  • Acura TLX purple wrap
  • Acura TLX pink wrap
  • Acura TLX teal wrap
  • Acura TLX brown wrap
  • Acura TLX gold wrap
  • Acura TLX chrome wrap
  • Acura TLX color shift wrap
  • Acura TLX carbon fiber wrap
  • Acura TLX camo and patterned wrap

How much vinyl to wrap an Acura TLX

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowsedan (4 doors)194.6 in (4,942 mm) to 194.6 in (4,943 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
2014–2020sedan (4 doors)191.0 in (4,851 mm) to 191.7 in (4,869 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Acura TLX wrap cost factors

The Acura TLX wrap cost depends mainly on the size of the car, the amount of film, and the work required around the factory features. The car is a mid-size sedan between 191.0 in (4,851 mm) and 194.6 in (4,943 mm) long, and a full wrap uses 56 to 59 ft (17 to 18 m) of cast film for a standard color. Installing chrome or patterned film raises the material amount to about 69 ft (21 m) and adds time for pattern matching. The sunroof, parking sensors, cameras, and fog lamps on the first generation all require additional cut-outs, which also affects the final cost.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: sedan (4 doors).
  • Restyled in 2023: bumpers and lights differ between the versions, and so do the film cuts.

Acura TLX wraps by generation

Swipe sideways. Tap a card for the full description.

Acura TLX, second generation, factory photo
Factory color shown

2020–now Acura TLX sedan (second generation)

2020–nowsedan (4 doors)194.6 in (4,942 mm) to 194.6 in (4,943 mm)

The second-generation Acura TLX, produced from 2020 onward, received a restyling for 2023 that changed the bumpers and lights. As a result, film cut for the 2020–2022 TLX does not fit the 2023-and-later version without adjustment. The sedan body style remains the same, and the overall length stays at 194.6 in (4,942 mm) to 194.6 in (4,943 mm) across those years. Installers should note which bumper style the car has before cutting film.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Acura TLX, first generation, factory photo
Factory color shown

2014–2020 Acura TLX sedan (first generation)

2014–2020sedan (4 doors)191.0 in (4,851 mm) to 191.7 in (4,869 mm)

The first-generation Acura TLX, produced from 2014 to 2020, is a mid-size sedan with a body length of 191.0 in (4,851 mm) to 191.7 in (4,869 mm). Its size and four-door style mean a full wrap covers a large number of panels, including the roof, hood, trunk, and all four doors. The car takes about 59 ft (18 m) of 60-inch (1.52 m) cast film for a standard wrap. The 2016 restyling changed the front and rear fascias, so film cuts for earlier and later versions may differ.

Every trim has a sunroof: the roof film is cut around its opening.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on an Acura TLX

A partial wrap on an Acura TLX can cover the roof, hood, or mirror caps without wrapping the whole car. The Acura TLX chrome delete is another option, replacing the bright trim on the window surrounds and badges with black film. Paint protection film (PPF) is also available for the front end, using clear film on the hood, fenders, and bumper to shield against stone chips. These smaller jobs use less film than a full wrap and focus on specific areas of the sedan.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Acura TLX: body, cut-outs and film

The Acura TLX vinyl wrap work follows the sedan body style, which means four doors, a long roof panel, and a full set of bumpers to cover. Both generations are mid-size sedans, and the lengths run from 191.0 in (4,851 mm) on early first-generation cars to 194.6 in (4,943 mm) on second-generation cars. The wrap installer treats the body as a set of large, mostly flat panels, with the hood, roof, trunk, and door skins taking most of the film. The small difference in length between the two generations does not change the panel count, but it affects how much vinyl is needed for a full wrap.

Acura TLX wrap ideas must account for the standard features on the first-generation body, because every trim of the 2014–2020 TLX has a sunroof, parking sensors, cameras, and fog lamps. The roof film is cut around the sunroof opening, and the bumper film is cut around each parking sensor and fog lamp. The body cameras also require cut-outs around each lens so the views stay clear. A clean wrap therefore depends on precise cutting and careful positioning around these factory openings.

How much vinyl to wrap an Acura TLX depends on which generation is being covered, because the two bodies use slightly different amounts of film. The first-generation TLX (2014–2020) takes about 59 ft (18 m) of 60-inch (1.52 m) cast film for a full wrap, while the second-generation TLX (2020–now) takes about 56 ft (17 m). Chrome or patterned film raises the total to about 69 ft (21 m) for either generation, because the pattern must be matched across panels. The restyling years, 2016 for the first generation and 2023 for the second, do not change the panel sizes enough to alter the film estimate.

Questions about wrapping an Acura TLX

How much vinyl does it take to wrap an Acura TLX?

It takes about 56 ft (17 m) of 60-inch (1.52 m) cast vinyl to wrap a second-generation Acura TLX, the newest body. That figure is for a standard color change wrap; if the vinyl has a chrome or patterned finish, the total rises to about 69 ft (21 m). The first-generation TLX needs slightly more material, around 59 ft (18 m).

Which years of the Acura TLX take the same film cuts?

For the first-generation Acura TLX, the same film cuts fit the years 2014–2015, while the 2016 restyling introduced different bumpers and lights. For the second-generation TLX, the same cuts fit 2020–2022, and the 2023 restyling changed the bumpers and lights again. A car from the earlier years of a generation does not use the same templates as a car after its restyling.

Can I wrap only the hood or the roof of an Acura TLX?

Yes, you can wrap only the hood or the roof of an Acura TLX. A partial wrap can cover the roof, hood, or mirror caps by themselves without wrapping the entire car. This is a way to change the look or protect a specific panel with less film than a full wrap.

Is an Acura TLX hard to wrap?

An Acura TLX is not especially hard to wrap, but some features add work. The first-generation TLX has a sunroof, parking sensors, cameras, and fog lamps on every trim, and the film must be cut around each of those. The car is a mid-size sedan with a length up to 194.6 in (4,942 mm), so a full wrap covers a large area, but the panels are mostly flat and accessible.