Wraps by car

Acura RSX wrap

An Acura RSX wrap is a full vinyl wrap of the first-generation RSX coupe, sold from 2001 to 2006. The catalog covers this single generation, so one template set works for the range. A complete wrap of the latest body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film.

1generations14.5 mof film for a full wrap

Acura RSX, first generation, factory photo
Acura RSX, first generation. Factory color shown.

Acura RSX wrap colors and ideas

  • Acura RSX black wrap
  • Acura RSX white wrap
  • Acura RSX gray wrap
  • Acura RSX silver wrap
  • Acura RSX red wrap
  • Acura RSX blue wrap
  • Acura RSX green wrap
  • Acura RSX yellow wrap
  • Acura RSX orange wrap
  • Acura RSX purple wrap
  • Acura RSX pink wrap
  • Acura RSX teal wrap
  • Acura RSX brown wrap
  • Acura RSX gold wrap
  • Acura RSX chrome wrap
  • Acura RSX color shift wrap
  • Acura RSX carbon fiber wrap
  • Acura RSX camo and patterned wrap

How much vinyl to wrap an Acura RSX

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2001–2006coupe (2 doors)172.2 in (4,374 mm) to 172.4 in (4,380 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Acura RSX wrap cost factors

An Acura RSX wrap cost depends on the amount of film, the number of body parts removed, and the condition of the paint. The film estimate for this coupe is about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. Adding chrome or patterned film brings the figure to about 59 ft (18 m).

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.
  • Restyled in 2004: bumpers and lights differ between the versions, and so do the film cuts.

Acura RSX wraps by generation

Swipe sideways. Tap a card for the full description.

Acura RSX, first generation, factory photo
Factory color shown

2001–2006 Acura RSX coupe (first generation)

2001–2006coupe (2 doors)172.2 in (4,374 mm) to 172.4 in (4,380 mm)

The first-generation Acura RSX was built from 2001 to 2006 and restyled in 2004. Bumpers and lights changed with the restyle, so one set of patterns fits the early cars and another fits the later cars. A wrap installer needs to check which version the car is before cutting film.

Two long side doors: each door is one large piece of film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on an Acura RSX

Partial wrap jobs on an Acura RSX include the roof, hood, and mirror caps. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Acura RSX: body, cut-outs and film

An Acura RSX vinyl wrap works with a compact coupe shape that has two long side doors. Each door is one large piece of film, which gives the installer clean, uninterrupted panels to work with. The car's overall length runs from 172.2 in (4,374 mm) to 172.4 in (4,380 mm), which keeps material use close to the estimate for any year.

Acura RSX wrap ideas start with the front bumper, rear bumper, side mirrors, door handles, and the area around the headlights and taillights. These parts need cut-outs or are removed for a clean edge. Full door panels are straightforward because each door is one large piece of film.

To know how much vinyl to wrap an Acura RSX, you count one body generation with a 2004 restyling. The bumpers and lights changed at that point, so film patterns cut for a 2002 model will not fit a 2005 model. Order the film cut for the correct side of that split.

Questions about wrapping an Acura RSX

How much vinyl does it take to wrap an Acura RSX?

It takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film to wrap an Acura RSX fully. That figure covers the entire first-generation coupe body. With chrome or patterned film, plan on about 59 ft (18 m).

Which years of the Acura RSX take the same film cuts?

The years 2001 to 2004 share one set of film cuts, and the years 2004 to 2006 share another. The restyling in 2004 changed the bumpers and lights, so the two sides do not interchange. A car from 2004 needs a look at its build date to confirm the style.

Can I wrap only the hood or the roof of an Acura RSX?

Yes, you can wrap only the hood or the roof of an Acura RSX. These are standard partial wrap jobs along with the mirror caps. The installer will use the same film and finish the edges cleanly around the panel lines.

Is an Acura RSX hard to wrap?

An Acura RSX is not especially hard to wrap, but the two long side doors add work because each door is one large piece of film. The front and rear bumpers and the mirrors need cut-outs or removal for a neat job. The car's compact size keeps the total material use close to the estimate.