Wraps by car

Acura NSX wrap

This page covers the Acura NSX wrap in vinyl wrap for both generations that the catalog lists. The current second generation runs from 2015 onward and is a two-door coupe. A full wrap of that newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film.

2generations15 mof film for a full wrap

Acura NSX, second generation, factory photo
Acura NSX, second generation. Factory color shown.

Acura NSX wrap colors and ideas

  • Acura NSX black wrap
  • Acura NSX white wrap
  • Acura NSX gray wrap
  • Acura NSX silver wrap
  • Acura NSX red wrap
  • Acura NSX blue wrap
  • Acura NSX green wrap
  • Acura NSX yellow wrap
  • Acura NSX orange wrap
  • Acura NSX purple wrap
  • Acura NSX pink wrap
  • Acura NSX teal wrap
  • Acura NSX brown wrap
  • Acura NSX gold wrap
  • Acura NSX chrome wrap
  • Acura NSX color shift wrap
  • Acura NSX carbon fiber wrap
  • Acura NSX camo and patterned wrap

How much vinyl to wrap an Acura NSX

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–nowcoupe (2 doors)176.0 in (4,470 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
1990–2005coupe (2 doors)174.2 in (4,425 mm)about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Acura NSX wrap cost factors

The Acura NSX wrap cost depends on the size of the car and the amount of film it takes. The second generation uses about 49 ft (15 m) and the first generation about 43 ft (13 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds more material for either body.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Acura NSX wraps by generation

Swipe sideways. Tap a card for the full description.

Acura NSX, second generation, factory photo
Factory color shown

2015–now Acura NSX coupe (second generation)

2015–nowcoupe (2 doors)176.0 in (4,470 mm)

The second generation Acura NSX is a coupe with two long side doors, and each door is one large piece of film. That means a full wrap uses about 49 ft (15 m) of 60-inch (1.52 m) cast film. The length of 176.0 in (4,470 mm) keeps the panel count low on the sides.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Acura NSX, first generation, factory photo
Factory color shown

1990–2005 Acura NSX coupe (first generation)

1990–2005coupe (2 doors)174.2 in (4,425 mm)

The first generation Acura NSX was made from 1990 to 2005, so paint age varies from car to car. Some panels may be original while others have been repainted, and an installer should run a test spot before a full wrap. The restyle in 2002 does not change the film estimate of about 43 ft (13 m).

Two long side doors: each door is one large piece of film.

Film: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on an Acura NSX

A partial wrap for the Acura NSX can cover the roof, hood, or mirror caps as separate jobs. Chrome delete is another option: black film can cover the window trim and badges. Paint protection film (PPF) is a clear film that can be applied to the front end only.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Acura NSX: body, cut-outs and film

An Acura NSX vinyl wrap starts with a coupe body that has two long side doors. Each door is one large piece of film, so a full wrap is planned around those panels. The second generation measures 176.0 in (4,470 mm), while the first generation is 174.2 in (4,425 mm).

Acura NSX wrap ideas include covering the two long side doors as single pieces to keep the film smooth. Door handles, mirrors and badges are removed or cut out so the film can be tucked at the edges. The front and rear bumpers are wrapped in sections because of their deep curves.

How much vinyl to wrap an Acura NSX changes between the first and second generation. The newer body needs about 49 ft (15 m) of 60-inch (1.52 m) cast film, while the older body needs about 43 ft (13 m). A first-generation car restyled in 2002 keeps the same film estimate.

Questions about wrapping an Acura NSX

How much vinyl does it take to wrap an Acura NSX?

A full wrap of an Acura NSX takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. That figure is for the newest body, the second generation coupe from 2015 onward. Chrome or patterned film can raise the amount to about 56 ft (17 m).

Can I wrap only the hood or the roof of an Acura NSX?

Yes, you can wrap only the hood or the roof of an Acura NSX. A partial wrap can cover the roof, hood, or mirror caps as separate jobs. That is a smaller job than a full wrap and uses much less film.

Is an Acura NSX hard to wrap?

An Acura NSX is not especially hard to wrap, but the two long side doors add work because each door is one large piece of film. The coupe body is low and wide, so an installer needs a clean, open space to move around it. The size of 176.0 in (4,470 mm) means the film must be handled carefully to avoid wrinkles.

How many generations of the Acura NSX does this page cover?

This page covers two generations of the Acura NSX. The first generation ran from 1990 to 2005, and the second generation runs from 2015 onward. Both are two-door coupes with long side doors.