Wraps by car

Alfa Romeo 155 wrap

The Alfa Romeo 155 wrap page covers the first-generation sedan produced from 1992 to 1997. A vinyl wrap on this car uses about 49 ft (15 m) of 60-inch (1.52 m) cast film. The 155 was restyled in 1995, so film patterns split into early and late versions.

1generations15 mof film for a full wrap

Alfa Romeo 155, first generation, factory photo
Alfa Romeo 155, first generation. Factory color shown.

Alfa Romeo 155 wrap colors and ideas

  • Alfa Romeo 155 black wrap
  • Alfa Romeo 155 white wrap
  • Alfa Romeo 155 gray wrap
  • Alfa Romeo 155 silver wrap
  • Alfa Romeo 155 red wrap
  • Alfa Romeo 155 blue wrap
  • Alfa Romeo 155 green wrap
  • Alfa Romeo 155 yellow wrap
  • Alfa Romeo 155 orange wrap
  • Alfa Romeo 155 purple wrap
  • Alfa Romeo 155 pink wrap
  • Alfa Romeo 155 teal wrap
  • Alfa Romeo 155 brown wrap
  • Alfa Romeo 155 gold wrap
  • Alfa Romeo 155 chrome wrap
  • Alfa Romeo 155 color shift wrap
  • Alfa Romeo 155 carbon fiber wrap
  • Alfa Romeo 155 camo and patterned wrap

How much vinyl to wrap an Alfa Romeo 155

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1992–1997sedan (4 doors)174.9 in (4,443 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Alfa Romeo 155 wrap cost factors

Alfa Romeo 155 wrap cost depends on film type and the amount of custom cutting. The car needs about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full color change. The 1995 restyling means the installer must choose the correct bumper and light templates. Removing and reinstalling the window trim adds labor to the job.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).
  • Restyled in 1995: bumpers and lights differ between the versions, and so do the film cuts.

Alfa Romeo 155 wraps by generation

Swipe sideways. Tap a card for the full description.

Alfa Romeo 155, first generation, factory photo
Factory color shown

1992–1997 Alfa Romeo 155 sedan (first generation)

1992–1997sedan (4 doors)174.9 in (4,443 mm)

The first-generation Alfa Romeo 155 was built from 1992 to 1997 as a four-door sedan. The 1995 restyling changed the front and rear bumpers and the light units. Because of that, a film pattern for a 1992 car will not fit a 1996 car. The interior and the main body panels remained the same through the run.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on an Alfa Romeo 155

An Alfa Romeo 155 chrome delete covers the window trim and badges with black film. The roof, hood, and mirror caps are also suited to a partial wrap. Paint protection film (PPF) on the front end guards against stone chips on the hood and bumper. These smaller jobs use less film than a full wrap and take less time to install.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Alfa Romeo 155: body, cut-outs and film

An Alfa Romeo 155 vinyl wrap covers a mid-size four-door sedan. The body length of 174.9 in (4,443 mm) keeps the job within the standard range for a sedan. The trunk and roof panels are large, so the installer can work with full-width film sheets. The 155 has a single body style, which simplifies fitting procedures.

Alfa Romeo 155 wrap ideas start with the factory badge and trim layout. The door handles, mirrors, and the bright trim around the windows need careful cutting or removal. The front and rear bumpers have recessed sections that require relief cuts. The 1995 restyling changed the bumpers, so early and late cars use different templates.

How much vinyl to wrap an Alfa Romeo 155 depends on the production period of the car. The 1995 restyling altered the bumper and light shapes, so a kit for a 1992 car does not fit a 1996 car. The overall length stayed the same, so the main body panels use the same amount of film. Only the bumper and light areas change the cut list.

Questions about wrapping an Alfa Romeo 155

How much vinyl does it take to wrap an Alfa Romeo 155?

A full wrap of an Alfa Romeo 155 takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. That is the estimate for the body without a patterned film, which would need about 64 ft (19.5 m). The 1995 restyling does not change the total film area for the main panels.

Which years of the Alfa Romeo 155 take the same film cuts?

The Alfa Romeo 155 was made from 1992 to 1997, and the restyling came in 1995. Cars built from 1992 to 1994 share one set of film cuts, and cars built from 1995 to 1997 share another. The bumper and light shapes changed at the restyling, so the two sets are not interchangeable.

Can I wrap only the hood or the roof of an Alfa Romeo 155?

Yes, you can wrap only the hood or the roof of an Alfa Romeo 155. The hood is a single large panel that takes well to a partial wrap. The roof is also flat and easy to cover with one piece of film. Mirror caps are another small job that can be done alone.

Is an Alfa Romeo 155 hard to wrap?

An Alfa Romeo 155 is not especially hard to wrap, but the window trim adds work. The bright trim around the windows must be removed or masked carefully. The 1995 restyling means the installer must check the bumper style before cutting film. The mid-size body of 174.9 in (4,443 mm) is manageable for one installer.