Wraps by car

Alfa Romeo Brera wrap

The Alfa Romeo Brera wrap covers the 2005–2011 first generation hatchback. This sports car has a sleek three-door body that uses about 52 ft (16 m) of 60-inch (1.52 m) cast vinyl wrap for a full color change. A chrome or patterned film wrap needs about 67 ft (20.5 m).

1generations16 mof film for a full wrap

Alfa Romeo Brera, first generation, factory photo
Alfa Romeo Brera, first generation. Factory color shown.

Alfa Romeo Brera wrap colors and ideas

  • Brera black wrap
  • Brera white wrap
  • Brera gray wrap
  • Brera silver wrap
  • Brera red wrap
  • Brera blue wrap
  • Brera green wrap
  • Brera yellow wrap
  • Brera orange wrap
  • Brera purple wrap
  • Brera pink wrap
  • Brera teal wrap
  • Brera brown wrap
  • Brera gold wrap
  • Brera chrome wrap
  • Brera color shift wrap
  • Brera carbon fiber wrap
  • Brera camo and patterned wrap

How much vinyl to wrap an Alfa Romeo Brera

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2005–2011hatchback (3 doors)173.6 in (4,410 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Brera wrap cost factors

Brera wrap cost depends on the size of the car and the film chosen. At 173.6 in (4,410 mm) long, the body takes about 52 ft (16 m) of standard film. A chrome or patterned film requires about 67 ft (20.5 m).

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Brera wraps by generation

Swipe sideways. Tap a card for the full description.

Alfa Romeo Brera, first generation, factory photo
Factory color shown

2005–2011 Brera hatchback (first generation)

2005–2011hatchback (3 doors)173.6 in (4,410 mm)

The first generation Alfa Romeo Brera (2005–2011) needs a paint inspection before wrapping. Panels of these years may be original or repainted, and a test spot checks adhesion. This step prevents lifting on older paint.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Brera

A partial wrap on an Alfa Romeo Brera can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF), a clear film on the front end, is another option.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Alfa Romeo Brera: body, cut-outs and film

An Alfa Romeo Brera vinyl wrap on this three-door hatchback means a single tailgate panel and two long side doors. At 173.6 in (4,410 mm) long, the body is compact for a sports car. Each side door is one large piece of film, which reduces visible seams.

Brera wrap ideas must include the tailgate with its rear glass: the film ends at the edge of the glass. The two long doors are wrapped as single pieces, so cut lines stay minimal. Door handles and badges come off for a clean finish around these areas.

How much vinyl to wrap a Brera stays the same for all years from 2005 to 2011 because there is one generation. Figure about 52 ft (16 m) for a standard color change wrap. Add a 20% overage, and you have around 62 ft (19 m) on hand.

Questions about wrapping an Alfa Romeo Brera

How much vinyl does it take to wrap an Alfa Romeo Brera?

About 52 ft (16 m) of 60-inch (1.52 m) cast film wraps an Alfa Romeo Brera in one color. A chrome or patterned film needs about 67 ft (20.5 m).

Can I wrap only the hood or the roof of a Brera?

Yes, you can wrap only the hood or the roof of a Brera. A partial wrap can also cover the mirror caps.

Is a Brera hard to wrap?

A Brera is not the hardest car to wrap, but it has two long doors that are each one large piece of film. The tailgate has rear glass in it, so the film ends at the edge of the glass.

How many generations of the Brera does this page cover?

This page covers one generation of the Alfa Romeo Brera, produced from 2005 to 2011.