Wraps by car

Alfa Romeo Giulietta wrap

The Alfa Romeo Giulietta wrap page covers all three generations of the compact car, from 1954 to today. A full vinyl wrap of the newest hatchback body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 66 ft (20 m) for the same car.

3generations17 mof film for a full wrap

Alfa Romeo Giulietta, third generation, factory photo
Alfa Romeo Giulietta, third generation. Factory color shown.

Alfa Romeo Giulietta wrap colors and ideas

  • Giulietta black wrap
  • Giulietta white wrap
  • Giulietta gray wrap
  • Giulietta silver wrap
  • Giulietta red wrap
  • Giulietta blue wrap
  • Giulietta green wrap
  • Giulietta yellow wrap
  • Giulietta orange wrap
  • Giulietta purple wrap
  • Giulietta pink wrap
  • Giulietta teal wrap
  • Giulietta brown wrap
  • Giulietta gold wrap
  • Giulietta chrome wrap
  • Giulietta color shift wrap
  • Giulietta carbon fiber wrap
  • Giulietta camo and patterned wrap

How much vinyl to wrap an Alfa Romeo Giulietta

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2010–nowhatchback (5 doors)171.3 in (4,351 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
1977–1985sedan (4 doors)156.7 in (3,980 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
1954–1964convertible, coupe, sedan, wagon (2 or 4 or 5 doors)156.7 in (3,980 mm) to 158.8 in (4,033 mm)about 43 ft (13 m) for the coupe to 44 ft (13.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m)

Giulietta wrap cost factors

Giulietta wrap cost depends on the amount of film, the body style, and the installer's time. A larger body like the current hatchback uses more film than the first generation coupe. The condition of the paint and the number of cut-outs also affect the labor. Chrome delete or patterned film adds to the material needed.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2016: bumpers and lights differ between the versions, and so do the film cuts.

Giulietta wraps by generation

Swipe sideways. Tap a card for the full description.

Alfa Romeo Giulietta, third generation, factory photo
Factory color shown

2010–now Giulietta hatchback (third generation)

2010–nowhatchback (5 doors)171.3 in (4,351 mm)

The third generation Alfa Romeo Giulietta runs from 2010 to now and was restyled in 2016. Bumpers and lights changed in 2016, so film cut for one version does not fit the other. The body is a five-door hatchback with a length of 171.3 in (4,351 mm). Some trims have a sunroof, and the roof film is cut around its opening.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Alfa Romeo Giulietta, second generation, factory photo
Factory color shown

1977–1985 Giulietta sedan (second generation)

1977–1985sedan (4 doors)156.7 in (3,980 mm)

The second generation Alfa Romeo Giulietta was built from 1977 to 1985 as a four-door sedan. Paint age matters on a car of these years because panels may be original or repainted. A test spot comes before a full wrap to check paint adhesion. The car is 156.7 in (3,980 mm) long and uses a compact body.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Alfa Romeo Giulietta, first generation, factory photo
Factory color shown

1954–1964 Giulietta convertible, coupe, sedan, wagon (first generation)

1954–1964convertible, coupe, sedan, wagon (2 or 4 or 5 doors)156.7 in (3,980 mm) to 158.8 in (4,033 mm)

The first generation Alfa Romeo Giulietta ran from 1954 to 1964 and offered a convertible, coupe, sedan, or wagon. A fabric top is not wrapped, and the film ends where it begins. A folding hard top is wrapped as panels of its own. The tailgate has the rear glass in it, and the film ends at the edge of the glass.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 43 ft (13 m) for the coupe to 44 ft (13.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Giulietta

A partial wrap on an Alfa Romeo Giulietta covers the roof, hood, or mirror caps. Giulietta chrome delete covers window trim and badges with black film. Paint protection film is a clear film applied to the front end. These options use less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Alfa Romeo Giulietta: body, cut-outs and film

The Alfa Romeo Giulietta vinyl wrap changes with body style and size. The current hatchback is 171.3 in (4,351 mm) long and has five doors, while the first generation offered convertible, coupe, sedan, and wagon bodies. A wrap covers all painted panels, and the film is cut to follow each body line.

Giulietta wrap ideas include cut-outs for lights, sensors, and fog lamps. Every trim has fog lamps in the front bumper, so the film is cut around each lamp. Some trims have parking sensors in the bumpers, and the film is cut around each sensor. The tailgate has the rear glass in it, and the film ends at the edge of the glass.

How much vinyl to wrap a Giulietta depends on the generation and body style. The third generation hatchback needs about 56 ft (17 m), while the second generation sedan needs about 49 ft (15 m). The first generation coupe needs about 43 ft (13 m), and the sedan needs about 44 ft (13.5 m).

Questions about wrapping an Alfa Romeo Giulietta

How much vinyl does it take to wrap an Alfa Romeo Giulietta?

It takes about 56 ft (17 m) of 60-inch (1.52 m) cast film to wrap an Alfa Romeo Giulietta of the newest body. Chrome or patterned film needs about 66 ft (20 m). The amount depends on the body style and the film type.

Can the roof of a Giulietta be wrapped?

Yes, the roof of a Giulietta can be wrapped as a partial job. Some trims have a sunroof, and the film is cut around its opening. The roof is also part of a full wrap and can be done in a different color.

Which years of the Giulietta take the same film cuts?

The same film cuts fit Alfa Romeo Giulietta models within each generation. The third generation was restyled in 2016, so film cut for one version does not fit the other. The second generation and first generation each have their own body shapes.

Can I wrap only the hood or the roof of a Giulietta?

Yes, you can wrap only the hood or the roof of a Giulietta. Partial wraps cover the roof, hood, or mirror caps. Chrome delete covers window trim and badges. Paint protection film is available for the front end.