Wraps by car

Alfa Romeo Spider wrap

The Alfa Romeo Spider wrap page covers the three generations of the open classic and how much vinyl wrap a full body needs. A complete color change on the newest 2005–2011 body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. With chrome or patterned film the amount rises to about 52 ft (16 m). Every figure here applies to the convertible two-door body.

3generations14 mof film for a full wrap

Alfa Romeo Spider, third generation, factory photo
Alfa Romeo Spider, third generation. Factory color shown.

Alfa Romeo Spider wrap colors and ideas

  • Spider black wrap
  • Spider white wrap
  • Spider gray wrap
  • Spider silver wrap
  • Spider red wrap
  • Spider blue wrap
  • Spider green wrap
  • Spider yellow wrap
  • Spider orange wrap
  • Spider purple wrap
  • Spider pink wrap
  • Spider teal wrap
  • Spider brown wrap
  • Spider gold wrap
  • Spider chrome wrap
  • Spider color shift wrap
  • Spider carbon fiber wrap
  • Spider camo and patterned wrap

How much vinyl to wrap an Alfa Romeo Spider

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2005–2011convertible (2 doors)173.0 in (4,393 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)
1995–2005convertible (2 doors)168.7 in (4,285 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)
1964–1995convertible (2 doors)162.2 in (4,120 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)

Spider wrap cost factors

Spider wrap cost depends on the size of the body, the film type and the condition of the paint under it. The newest 2005–2011 shell is 173.0 in (4,393 mm) long and needs about 46 ft (14 m) of cast film, while the first generation takes about 41 ft (12.5 m). A car with old or peeling paint needs more prep time before the vinyl touches the panel. Removing and refitting badges, handles and lamps also adds labor.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Spider wraps by generation

Swipe sideways. Tap a card for the full description.

Alfa Romeo Spider, third generation, factory photo
Factory color shown

2005–2011 Spider convertible (third generation)

2005–2011convertible (2 doors)173.0 in (4,393 mm)

The open top of the 2005–2011 Alfa Romeo Spider is not wrapped and the film ends where the fabric or folding roof begins. The installer runs the vinyl to the edge of the roof opening and trims it under the seal, so no film touches the moving roof. A folding hard top is wrapped as its own set of panels. The film estimate does not include any material for the soft top.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Alfa Romeo Spider, second generation, factory photo
Factory color shown

1995–2005 Spider convertible (second generation)

1995–2005convertible (2 doors)168.7 in (4,285 mm)

Paint age on a 1995–2005 Alfa Romeo Spider is often uneven, with original panels next to repainted ones, so a test spot comes before a full wrap. The installer checks adhesion on each major panel because old clear coat can fail under the film. That step is part of estimating film for the 168.7 in (4,285 mm) body. The wrap facts for this generation list only the soft top limit, so the film ends where the top begins.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Alfa Romeo Spider, first generation, factory photo
Factory color shown

1964–1995 Spider convertible (first generation)

1964–1995convertible (2 doors)162.2 in (4,120 mm)

The size and the body style of the 1964–1995 Alfa Romeo Spider mean fewer panels and a lower film figure of about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. The 162.2 in (4,120 mm) length leaves less surface than the newer bodies. The convertible shape still has two doors, a hood and a tail, but no roof panel to cover. Chrome or patterned film on this car takes about 49 ft (15 m).

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Roof, hood, chrome delete and PPF on a Spider

A partial wrap on a Spider covers the hood, mirror caps and rear deck, leaving the doors and sills in the original color. Spider chrome delete covers the window trim and badges with black film painted or gloss as you choose. Paint protection film on the front end is clear film over the bumper, fender tips and part of the hood before a color change. The partial wrap text does not give a film amount because the panels are only a part of the car.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Alfa Romeo Spider: body, cut-outs and film

An Alfa Romeo Spider vinyl wrap follows a compact convertible shape with a short rear deck and long doors. The newest 2005–2011 car is 173.0 in (4,393 mm) long, and the previous generations are 168.7 in (4,285 mm) and 162.2 in (4,120 mm). No roof panel means one large hood, two door skins and deep side sills. The film estimate allows for those panels plus both quarter panels and the tail.

Spider wrap ideas have to respect the soft top, which is never covered with film, so the color change ends where the fabric begins. On the third generation every trim has fog lamps in the front bumper, and the installer cuts openings in the bumper film. A folding hard top is wrapped as its own separate panels when the car has one. Badges and door handles are removed, and the antenna base gets a cut-out in most cases.

How much vinyl to wrap a Spider changes with the generation you own, and a person counting film sizes the panels first. The first generation 1964–1995 body is the smallest at 162.2 in (4,120 mm) and the estimate for cast film is about 41 ft (12.5 m) of 60-inch (1.52 m) material. For the second generation 1995–2005 car the cast film estimate is about 46 ft (14 m), the same as the newest body. Chrome or patterned film adds up to 51 ft (15.5 m) or 52 ft (16 m) on those later cars.

Questions about wrapping an Alfa Romeo Spider

How much vinyl does it take to wrap an Alfa Romeo Spider?

About 46 ft (14 m) of 60-inch (1.52 m) cast film is the estimate to wrap the newest 2005–2011 Alfa Romeo Spider. The figure comes from the data for the third generation convertible body. The first generation takes about 41 ft (12.5 m), so the newest body is the highest of the three.

Is the top of a Spider wrapped?

No, the top of a Spider is not wrapped when the car has a fabric roof. The film ends where the top begins, and no vinyl goes onto the moving fabric. If the car has a folding hard top, that roof is wrapped as its own panels.

Can I wrap only the hood or the roof of a Spider?

Yes, you can wrap only the hood or the roof of a Spider, but the roof of the soft top does not get film. The partial wrap text lists hood, mirror caps and rear deck as smaller jobs. Paint protection film on the front end is clear film on the bumper and hood as another option.

Is a Spider hard to wrap?

A Spider is not the hardest car to wrap, but the third generation adds work because every trim has fog lamps in the front bumper and needs cut-outs. The compact size at 173.0 in (4,393 mm) keeps the film amount to about 46 ft (14 m). The soft top edge must be trimmed cleanly, which adds detail work to the install.