Wraps by car

Alfa Romeo SZ wrap

The Alfa Romeo SZ wrap transforms this limited-production sports car with a new vinyl finish. This page covers the single generation built from 1988 to 1994. A full wrap of the coupe body uses about 44 ft (13.5 m) of 60-inch (1.52 m) cast film.

1generations13.5 mof film for a full wrap

Alfa Romeo SZ, first generation, factory photo
Alfa Romeo SZ, first generation. Factory color shown.

Alfa Romeo SZ wrap colors and ideas

  • Alfa Romeo SZ black wrap
  • Alfa Romeo SZ white wrap
  • Alfa Romeo SZ gray wrap
  • Alfa Romeo SZ silver wrap
  • Alfa Romeo SZ red wrap
  • Alfa Romeo SZ blue wrap
  • Alfa Romeo SZ green wrap
  • Alfa Romeo SZ yellow wrap
  • Alfa Romeo SZ orange wrap
  • Alfa Romeo SZ purple wrap
  • Alfa Romeo SZ pink wrap
  • Alfa Romeo SZ teal wrap
  • Alfa Romeo SZ brown wrap
  • Alfa Romeo SZ gold wrap
  • Alfa Romeo SZ chrome wrap
  • Alfa Romeo SZ color shift wrap
  • Alfa Romeo SZ carbon fiber wrap
  • Alfa Romeo SZ camo and patterned wrap

How much vinyl to wrap an Alfa Romeo SZ

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1988–1994coupe (2 doors)159.8 in (4,060 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)

Alfa Romeo SZ wrap cost factors

An Alfa Romeo SZ wrap cost depends on the area covered and the film chosen. A full wrap needs about 44 ft (13.5 m) of 60-inch cast film. The two long doors add labor because each one is a large piece. The final cost changes with design complexity and the condition of the paint.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Alfa Romeo SZ wraps by generation

Swipe sideways. Tap a card for the full description.

Alfa Romeo SZ, first generation, factory photo
Factory color shown

1988–1994 Alfa Romeo SZ coupe (first generation)

1988–1994coupe (2 doors)159.8 in (4,060 mm)

The first generation Alfa Romeo SZ from 1988 to 1994 is the only body in this catalog. Paint age on a car of these years means panels may be original or repainted. A test spot before a full wrap checks how the paint reacts to the film. The body is a coupe with two doors and a length of 159.8 in (4,060 mm).

Two long side doors: each door is one large piece of film.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Roof, hood, chrome delete and PPF on an Alfa Romeo SZ

An Alfa Romeo SZ chrome delete covers the window trim and badges with black film. A partial wrap can include the roof, the hood, and the mirror caps. Paint protection film (PPF) with clear film on the front end is another smaller job. A full wrap is not the only way to change the car’s look.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Alfa Romeo SZ: body, cut-outs and film

An Alfa Romeo SZ vinyl wrap covers one two-door coupe shape with a length of 159.8 in (4,060 mm). The car’s compact footprint keeps material use moderate for a sports car. The two long side doors do not make the job larger than other coupes. The body has no extra styles, so the wrap plan stays the same.

Alfa Romeo SZ wrap ideas often focus on the two long side doors that each take one large piece of film. The doors are the main panels that require careful handling. The roof and hood can be wrapped without removing many parts. Window trim and badges can be covered with a chrome delete.

How much vinyl to wrap an Alfa Romeo SZ depends on the size of this one body. The first generation produced from 1988 to 1994 is the only generation in the catalog. A change between early and later cars can come from repainted panels. The wrap estimate stays at about 44 ft (13.5 m) of cast film.

Questions about wrapping an Alfa Romeo SZ

How much vinyl does it take to wrap an Alfa Romeo SZ?

About 44 ft (13.5 m) of 60-inch (1.52 m) cast film is needed to wrap an Alfa Romeo SZ. The figure from the film estimate of the coupe body covers the entire car. The two long side doors fit into this total as one large piece each.

Can I wrap only the hood or the roof of an Alfa Romeo SZ?

Yes, the hood or the roof of an Alfa Romeo SZ can be wrapped as a partial job. The job list for this car includes a roof wrap and a hood wrap. Mirror caps can also be added to a partial wrap.

Is an Alfa Romeo SZ hard to wrap?

An Alfa Romeo SZ is not very hard to wrap, but the two long side doors add work. Each door is one large piece of film, which takes careful alignment. The body length of 159.8 in (4,060 mm) is typical for a coupe.

How many generations of the Alfa Romeo SZ does this page cover?

This page covers one generation of the Alfa Romeo SZ. The catalog has the first generation from 1988 to 1994. No other generation of this car is listed.