Wraps by car

Alfa Romeo Stelvio wrap

The Alfa Romeo Stelvio wrap page covers the first generation of the Stelvio SUV, produced since 2016. A full vinyl wrap of the latest body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 70 ft (21.5 m) for complete coverage.

1generations19 mof film for a full wrap

Alfa Romeo Stelvio, first generation, factory photo
Alfa Romeo Stelvio, first generation. Factory color shown.

Alfa Romeo Stelvio wrap colors and ideas

  • Stelvio black wrap
  • Stelvio white wrap
  • Stelvio gray wrap
  • Stelvio silver wrap
  • Stelvio red wrap
  • Stelvio blue wrap
  • Stelvio green wrap
  • Stelvio yellow wrap
  • Stelvio orange wrap
  • Stelvio purple wrap
  • Stelvio pink wrap
  • Stelvio teal wrap
  • Stelvio brown wrap
  • Stelvio gold wrap
  • Stelvio chrome wrap
  • Stelvio color shift wrap
  • Stelvio carbon fiber wrap
  • Stelvio camo and patterned wrap

How much vinyl to wrap an Alfa Romeo Stelvio

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–nowSUV (5 doors)184.5 in (4,687 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Stelvio wrap cost factors

Stelvio wrap cost depends on the size of the vehicle and the film chosen. At 184.5 in (4,687 mm) long, the Stelvio needs about 62 ft (19 m) of standard film, or about 70 ft (21.5 m) for chrome or patterned film. The number of sensors, cameras, and trim pieces also affects labor time.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have a two-tone body from the factory: the roof is a second color, and the wrap either keeps that split or covers it.
  • Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2020, 2022: bumpers and lights differ between the versions, and so do the film cuts.

Stelvio wraps by generation

Swipe sideways. Tap a card for the full description.

Alfa Romeo Stelvio, first generation, factory photo
Factory color shown

2016–now Stelvio SUV (first generation)

2016–nowSUV (5 doors)184.5 in (4,687 mm)

The first-generation Alfa Romeo Stelvio offers a glass roof on some trims. The glass roof is not wrapped, so the roof stays dark whatever the color of the film. Installers leave that panel untouched and wrap only the metal sections around it.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have a two-tone body from the factory: the roof is a second color, and the wrap either keeps that split or covers it.

Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Stelvio

A partial wrap on a Stelvio can cover the hood, mirror caps, or roof on cars without the glass panel. A Stelvio chrome delete covers the window trim and badges with black film for a different look. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Alfa Romeo Stelvio: body, cut-outs and film

An Alfa Romeo Stelvio vinyl wrap covers a five-door SUV body that is 184.5 in (4,687 mm) long. The tall sides and large tailgate mean the film is applied in manageable sections rather than one huge sheet. The roof area is significant, so installers plan for extra material on the top surfaces.

Stelvio wrap ideas must account for several factory features on the body. Every trim has parking sensors in the bumpers, so the film is cut around each sensor. Some trims have fog lamps in the front bumper, requiring cut-outs in the bumper film. Some trims have cameras in the body, and the film is cut around each lens. A styling kit on some trims adds more separate pieces to wrap.

To work out how much vinyl to wrap a Stelvio, consider the single generation sold since 2016. The body was restyled in 2020 and again in 2022, but the overall dimensions stayed close, so film estimates remain similar. Early cars may have different bumper shapes, but the main panels are unchanged.

Questions about wrapping an Alfa Romeo Stelvio

How much vinyl does it take to wrap an Alfa Romeo Stelvio?

A full wrap of an Alfa Romeo Stelvio takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 70 ft (21.5 m). These figures are for the latest body style of the first generation.

Can the roof of a Stelvio be wrapped?

Yes, the roof of a Stelvio can be wrapped unless the car has a panoramic glass roof or sunroof on some trims. On cars with a steel roof, the wrap covers the entire panel. With a sunroof, the film is cut around its opening and the glass itself is not wrapped.

Which years of the Stelvio take the same film cuts?

All Stelvio models from 2016 to now share the same basic body, so film kits made for the original shape generally fit later cars. The restyles in 2020 and 2022 changed bumpers and lights, which may require different cut patterns for those areas. Most of the large panels remain the same across the first generation.

Can I wrap only the hood or the roof of a Stelvio?

Yes, you can wrap only the hood or the roof of a Stelvio. A partial wrap often includes the hood, mirror caps, and roof on cars without the glass panel. This is a way to change the look without covering the entire vehicle.