Wraps by car

Alfa Romeo 159 wrap

The Alfa Romeo 159 wrap page covers the first-generation sedan and wagon built from 2005 to 2012. A full vinyl wrap of this mid-size car needs about 52 ft (16 m) of 60-inch (1.52 m) cast film for the sedan. The wagon uses up to 57 ft (17.5 m) of the same film. A chrome or patterned design can take as much as 72 ft (22 m).

1generations17.5 mof film for a full wrap

Alfa Romeo 159, first generation, factory photo
Alfa Romeo 159, first generation. Factory color shown.

Alfa Romeo 159 wrap colors and ideas

  • Alfa Romeo 159 black wrap
  • Alfa Romeo 159 white wrap
  • Alfa Romeo 159 gray wrap
  • Alfa Romeo 159 silver wrap
  • Alfa Romeo 159 red wrap
  • Alfa Romeo 159 blue wrap
  • Alfa Romeo 159 green wrap
  • Alfa Romeo 159 yellow wrap
  • Alfa Romeo 159 orange wrap
  • Alfa Romeo 159 purple wrap
  • Alfa Romeo 159 pink wrap
  • Alfa Romeo 159 teal wrap
  • Alfa Romeo 159 brown wrap
  • Alfa Romeo 159 gold wrap
  • Alfa Romeo 159 chrome wrap
  • Alfa Romeo 159 color shift wrap
  • Alfa Romeo 159 carbon fiber wrap
  • Alfa Romeo 159 camo and patterned wrap

How much vinyl to wrap an Alfa Romeo 159

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2005–2012sedan, wagon (4 or 5 doors)183.5 in (4,660 mm)about 52 ft (16 m) for the sedan to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m)

Alfa Romeo 159 wrap cost factors

Alfa Romeo 159 wrap cost depends on the body style, the film type, and the labor for cut-outs. A sedan wrap uses about 52 ft (16 m) of 60-inch (1.52 m) cast film, while the wagon uses up to 57 ft (17.5 m), so the wagon needs more material. A chrome or patterned wrap can take up to 72 ft (22 m), which raises the cost. The installer's time also changes with the number of cut-outs, such as for sunroofs, parking sensors, and fog lamps on some trims.

  • Film for a full wrap: about 52 ft (16 m) for the sedan to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Alfa Romeo 159 wraps by generation

Swipe sideways. Tap a card for the full description.

Alfa Romeo 159, first generation, factory photo
Factory color shown

2005–2012 Alfa Romeo 159 sedan, wagon (first generation)

2005–2012sedan, wagon (4 or 5 doors)183.5 in (4,660 mm)

The first-generation Alfa Romeo 159 from 2005 to 2012 came as a four-door sedan or a five-door wagon, and the style decides the panel plan and the film amount. The sedan is 183.5 in (4,660 mm) long and wraps with about 52 ft (16 m) of 60-inch (1.52 m) cast film. The wagon of the same length needs up to 57 ft (17.5 m) because the tailgate and roof add surface area. All panels on both bodies are within the 60-inch (1.52 m) film width, so no seams are needed on the hood or roof.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 52 ft (16 m) for the sedan to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).

Roof, hood, chrome delete and PPF on an Alfa Romeo 159

An Alfa Romeo 159 chrome delete covers the window trim and badges with black film, and it is a smaller job than a full wrap. A partial wrap of the roof, hood, or mirror caps uses less film and labor than wrapping the whole sedan or wagon. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These partial jobs can be combined or done one at a time, depending on what the owner wants to change.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Alfa Romeo 159: body, cut-outs and film

An Alfa Romeo 159 vinyl wrap follows the sedan or wagon body style, which fixes the panel plan and the film amount. The sedan measures 183.5 in (4,660 mm) and has four doors, while the wagon adds a fifth door and more roof area. A wrap installer cuts each panel separately, so the wagon needs about 5 ft (1.5 m) more film than the sedan. The extra roof and tailgate surfaces are the main reason for that difference.

Alfa Romeo 159 wrap ideas start with the tailgate, where the film ends at the edge of the rear glass because the glass is part of the tailgate. Some trims have a sunroof, so the roof film is cut around its opening and the edges are tucked under the seal. Parking sensors in the bumpers on some trims mean the film is cut around each sensor, leaving a small circle of paint. Fog lamps in the front bumper on some trims also need cut-outs in the bumper film.

How much vinyl to wrap an Alfa Romeo 159 depends on the body style, because the sedan and wagon were the only shapes in the 2005–2012 generation. The sedan panel plan fits within about 52 ft (16 m) of 60-inch (1.52 m) film, while the wagon needs up to 57 ft (17.5 m). Installers add about 5 ft (1.5 m) for the wagon roof and tailgate, and extra film for chrome or patterned designs. A full wrap of either body uses one roll width of cast film, with no need to seam panels wider than 60 inches (1.52 m).

Questions about wrapping an Alfa Romeo 159

How much vinyl does it take to wrap an Alfa Romeo 159?

It takes about 52 ft (16 m) of 60-inch (1.52 m) cast film to wrap a 2005–2012 Alfa Romeo 159 sedan, and up to 57 ft (17.5 m) for the wagon. These figures cover the full painted body with standard cut-outs and tucked edges. A chrome or patterned wrap can need up to 72 ft (22 m) because of extra material for panels and design alignment.

Can the roof of an Alfa Romeo 159 be wrapped?

Yes, the roof of an Alfa Romeo 159 can be wrapped as a standalone job or as part of a full wrap. The roof film is cut around the sunroof opening on trims that have one, and the edges are tucked under the rubber seal. The sedan roof is about 183.5 in (4,660 mm) long and under 60 inches (1.52 m) wide, so one piece of film covers it without seams.

Which Alfa Romeo 159 body takes more film?

The Alfa Romeo 159 wagon takes more film than the sedan, about 57 ft (17.5 m) compared to 52 ft (16 m) of 60-inch (1.52 m) cast film. The wagon has a tailgate with the rear glass in it, so the film ends at the edge of the glass, but the extra roof and tailgate surfaces add about 5 ft (1.5 m). A chrome or patterned design on either body can take up to 72 ft (22 m).

Can I wrap only the hood or the roof of an Alfa Romeo 159?

Yes, you can wrap only the hood or the roof of an Alfa Romeo 159 as a partial wrap, along with the mirror caps. A chrome delete of the window trim and badges is another smaller job that does not require a full wrap. Paint protection film (PPF) on the front end is also a partial option that covers the hood, bumper, and fenders with clear film.