Wraps by car

Alfa Romeo GT wrap

This page covers the Alfa Romeo GT wrap for the single generation produced from 2003 to 2010. A full vinyl wrap of the coupe body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, plan for about 61 ft (18.5 m).

1generations15 mof film for a full wrap

Alfa Romeo GT, first generation, factory photo
Alfa Romeo GT, first generation. Factory color shown.

Alfa Romeo GT wrap colors and ideas

  • Alfa Romeo GT black wrap
  • Alfa Romeo GT white wrap
  • Alfa Romeo GT gray wrap
  • Alfa Romeo GT silver wrap
  • Alfa Romeo GT red wrap
  • Alfa Romeo GT blue wrap
  • Alfa Romeo GT green wrap
  • Alfa Romeo GT yellow wrap
  • Alfa Romeo GT orange wrap
  • Alfa Romeo GT purple wrap
  • Alfa Romeo GT pink wrap
  • Alfa Romeo GT teal wrap
  • Alfa Romeo GT brown wrap
  • Alfa Romeo GT gold wrap
  • Alfa Romeo GT chrome wrap
  • Alfa Romeo GT color shift wrap
  • Alfa Romeo GT carbon fiber wrap
  • Alfa Romeo GT camo and patterned wrap

How much vinyl to wrap an Alfa Romeo GT

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2003–2010coupe (2 doors)176.7 in (4,489 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Alfa Romeo GT wrap cost factors

Alfa Romeo GT wrap cost depends on film type and the size of the car. A full wrap takes about 49 ft (15 m) of cast film, or about 61 ft (18.5 m) for chrome or patterned film. The two long doors and fog lamp cut-outs add labor time. Condition of the paint also changes the preparation work.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Alfa Romeo GT wraps by generation

Swipe sideways. Tap a card for the full description.

Alfa Romeo GT, first generation, factory photo
Factory color shown

2003–2010 Alfa Romeo GT coupe (first generation)

2003–2010coupe (2 doors)176.7 in (4,489 mm)

The first generation Alfa Romeo GT ran from 2003 to 2010. On a car of these years, panels may be original or repainted, and a test spot comes before a full wrap. This checks adhesion on any repaired areas or older clear coat.

Two long side doors: each door is one large piece of film.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on an Alfa Romeo GT

For an Alfa Romeo GT chrome delete, you can cover the window trim and badges with black film. A partial wrap of the roof, hood, or mirror caps is a smaller job than a full wrap. Clear paint protection film (PPF) on the front end guards the bumper and hood from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Alfa Romeo GT: body, cut-outs and film

The Alfa Romeo GT vinyl wrap covers a mid-size coupe with two long side doors. Each door is one large piece of film, so a full wrap needs careful work on long panels. The car is 176.7 in (4,489 mm) long, which fits standard film rolls without extra seams.

Alfa Romeo GT wrap ideas start with the two long side doors. Every trim has fog lamps in the front bumper, so the bumper film needs cut-outs for them. The doors are large single pieces, and the front bumper is one more piece with relief cuts.

If you want to know how much vinyl to wrap an Alfa Romeo GT, count one body style and one generation. The coupe from 2003 to 2010 was the only shape, and its size changed very little over the years. Film estimates stay the same for any car of this generation.

Questions about wrapping an Alfa Romeo GT

How much vinyl does it take to wrap an Alfa Romeo GT?

Yes, wrapping an Alfa Romeo GT takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. If you use chrome or patterned film, the estimate is about 61 ft (18.5 m). These figures are for a full wrap of the coupe body.

Can I wrap only the hood or the roof of an Alfa Romeo GT?

Yes, you can wrap only the hood or the roof of an Alfa Romeo GT. The roof, hood, and mirror caps are common partial wrap areas. A chrome delete on the window trim and badges is another smaller job.

Is an Alfa Romeo GT hard to wrap?

The Alfa Romeo GT is not especially hard to wrap, but it has two long side doors that are each one large piece of film. Every trim has fog lamps in the front bumper, so the bumper film needs cut-outs. The coupe body is 176.7 in (4,489 mm) long, which is manageable for one installer with a helper.

How many generations of the Alfa Romeo GT does this page cover?

This page covers one generation of the Alfa Romeo GT, produced from 2003 to 2010. The coupe with two doors was the only body style in that generation. Its factory code is 937.